journal article·2011-05

Use of recalescence behavior analysis for the prediction of grain refinement in undercooled Cu–Ni alloy

W. Yang, F. Liu, Z. F. Xu, B. P. Lu, G. C. Yang

Journal of Materials Science· Volume 46· Issue 9
Publisher page

Abstract

Considering non-equilibrium solidification and its influence on subsequent near-equilibrium solidification together, the description of recalescence behavior in bulk undercooled Cu70Ni30 alloy was adopted to predict the corresponding microstructure transition. The thermal plateau time for near-equilibrium solidification can be deduced directly with the calculation of non-equilibrium solid fraction formed in recalescence. On the basis of quantitative description for recalescence behavior, the non-equilibrium solid fraction, residual liquid fraction, dendrite broken-up time, and thermal plateau time can be determined as functions of initial undercooling. Then, a simple and accurate application of dendrite fragmentation model was performed as the grain refinement at both low- and high-undercooling originates from dendrite breakup. The predicted undercooling regions for the double grain refinement agree well with the experimental observation. Moreover, the change of grain morphology for the second grain refinement can be ascribed to the occurrence of recrystallization produced by the enhanced residual stress upon highly undercooled solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Christian JW (2002) The theory of transformation in metals and alloys, 3rd edn. Pergamon Press, Oxford
2. Kurz W, Fisher DJ (1998) Fundamentals of solidification, 4th edn. Trans Tech Publications Ltd, Switzerland10.4028/www.scientific.net/RC.35 ↗
3. Baker JC, Cahn JW (1971) Solidification, 1st edn. ASM, Metals Park, OH
4. Walker JL (1959) The physical chemistry of process metallurgy. Wiley Interscience, New York, NY
5. Liu N, Liu F, Yang GC, Chen YZ, Chen D, Yang CL, Zhou YH (2007) Physica B 387:15110.1016/j.physb.2006.03.101 ↗
6. Chen YZ, Yang GC, Liu F, Liu N, Xie H, Zhou YH (2005) J Cryst Growth 282:49010.1016/j.jcrysgro.2005.05.016 ↗
7. Eckler K, Norman AF, Gätner F (1997) J Cryst Growth 173:52810.1016/S0022-0248(96)01066-4 ↗
8. Han XJ, Yang C, Wei B, Chen M, Guo ZY (2001) Mater Sci Eng A 307:3510.1016/S0921-5093(00)01969-9 ↗
9. Girtneri F, Norman AF, Greer AL, Zambon A, Ramous E, Eckler K, Herlach DM (1997) Acta Mater 45:5110.1016/S1359-6454(96)00166-8 ↗
10. Norman AF, Eckler K, Zambon A, Gärtner F, Moir SA, Ramous E, Herlach DM, Greer AL (1998) Acta Mater 46:335510.1016/S1359-6454(98)00078-0 ↗
11. Maslov VV, Nosenko VK, Jurisch M (2002) J Mater Sci 37:4663. doi: 10.1023/A:102066890402410.1023/A:1020668904024 ↗
12. Willnecker R, Herlach DM, Feuerbacher B (1990) Appl Phys Lett 56:32410.1063/1.103289 ↗
13. Dragnevski K, Cochrane RF, Mullis AM (2002) Phys Rev Lett 89:21550210.1103/PhysRevLett.89.215502 ↗
14. Mullis AM, Cochrane RF (1997) J Appl Phys 82:378310.1063/1.365740 ↗
15. Mullis AM, Cochrane RF (1998) J Appl Phys 84:490510.1063/1.368734 ↗
16. Powell GLF (1968) Trans Met Soc AIME 242:2133
17. Li JF, Zhou YH, Yang GC (2000) Mater Sci Eng A 277:16110.1016/S0921-5093(99)00532-8 ↗
18. Karma A (1998) Int J Non-Equilib Process 11:201
19. Schwarz M, Karma A, Eckler K (1994) Phys Rev Lett 73:138010.1103/PhysRevLett.73.1380 ↗
20. Liu F, Yang GC (2006) Int Mater Rev 51:14510.1179/174328006X102484 ↗
21. Yang W, Liu F, Wang HF, Chen Z, Yang GC, Zhou YH (2009) J Alloys Compd 470:L1310.1016/j.jallcom.2008.02.074 ↗
22. Yang W, Liu F, Liu H, Yang GC, Zhou YH (2009) J Cryst Growth 311:322510.1016/j.jcrysgro.2009.03.030 ↗
23. Yang W, Liu F, Wang HF, Chen Z, Yang GC, Zhou YH (2010) J Alloys Compd 491:11810.1016/j.jallcom.2009.10.150 ↗
24. Piccone TJ, Wu Y, Shiohara Y, Flemings MC (1987) Metall Trans A 18:92510.1007/BF02646934 ↗
25. Galenko PK, Danilov DA (1999) J Cryst Growth 197:99210.1016/S0022-0248(98)00977-4 ↗
26. Wang TM, Xu JJ, Xiao TQ, Xie HL, Li J, Li TJ, Cao ZQ (2010) Phys Rev E 81:04260110.1103/PhysRevE.81.042601 ↗
27. Rosam J, Jimack PK, Mullis AM (2008) Acta Mater 56:455910.1016/j.actamat.2008.05.029 ↗
28. Ramirez JC, Beckermann C (2005) Acta Mater 53:172110.1016/j.actamat.2004.12.021 ↗
29. Sha W, Wu X, Keong KG (2010) Electroless copper and nickel-phosphorus plating: processing, characterisation and modelling, 1st edn. Woodhead Publishing Limited, Cambridge
30. Herlach DM, Eckler K, Karma A, Schwarz M (2001) Mater Sci Eng A 304–306:2010.1016/S0921-5093(00)01553-7 ↗