journal article·2020-09

A novel fabrication technique of toughened TiC-based solid solution cermets using mechanochemical synthesis

Xiao Chen, Zhenhua Yao, Weihao Xiong, Jianfeng Xu

Journal of Materials Science· Volume 55· Issue 27
Publisher page

Abstract

Ceramic–metal composite powders (Ti,M)C-Ni (M = Mo, W and Ta) were prepared from elemental powders using a one-step mechanochemical synthesis method through high-energy ball milling. The microstructure and mechanical properties of the resulting cermets were also investigated. The analytical results revealed that ball milling of Ti-M-C-Ni elemental powders triggered a combustion reaction between Ti and C. The reaction resembled a fast sintering process which facilitated alloy elements atoms dissolve into the newly formed TiC, synthesizing the (Ti,M)C-Ni composite powders. The microstructure of the sintered (Ti,M)C-Ni cermets consisted of the core-rim structure grains and homogenous grains. High-resolution transmission electron microscope analysis results revealed that there was a misorientation between the ceramic phase and the binder phase in the cermets, but the interface between the core and the rim was coherent. The cermets exhibited mechanical properties that were comparable to conventionally produced cermets, particularly in fracture toughness which was as high as 12.45 MPa m1/2. The excellent cohesion between the Ni binder and the (Ti,M)C solid solution and the reduction in the interfacial stress in ceramic grains were believed to be responsible for the enhanced toughening of the cermets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Xu Q, Zhao J, Ai X (2017) Fabrication and cutting performance of Ti(C, N)-based cermet tools used for machining of high-strength steels. Ceram Int 43:6286–629410.1016/j.ceramint.2017.02.034 ↗
2. Wang H, Gee M, Qiu Q et al (2019) Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions. J Mater Sci Technol 35:2435–244610.1016/j.jmst.2019.07.016 ↗
3. Akinribide OJ, Obadele BA, Akinwamide SO et al (2019) Sintering of binderless TiN and TiCN-based cermet for toughness applications: processing techniques and mechanical properties: a review. Ceram Int 45:21077–2109010.1016/j.ceramint.2019.07.191 ↗
4. Ishihara S, Goshima T, Nomura K, Yoshimato T (1999) Crack propagation behavior of cermets and cemented carbides under repeated thermal shocks by the improved quench test. J Mater Sci 34:629–636. https://doi.org/10.1023/A:100457551929310.1023/A:1004575519293 ↗
5. Fu Z, Kong JH, Gajjala SR, Koc R (2018) Sintering, mechanical, and oxidation properties of TiC-Ni-Mo cermets obtained from ultra-fine TiC powders. J Alloys Compd 751:316–32310.1016/j.jallcom.2018.04.124 ↗
6. Östberg G, Buss K, Christensen M et al (2006) Effect of TaC on plastic deformation of WC–Co and Ti(C, N)–WC–Co. Int J Refract Met Hard Mater 24:145–15410.1016/j.ijrmhm.2005.04.010 ↗
7. Huang SG, Nie HB, Guo XY (2019) Microstructural investigation and machining performance of NbC-Ti(C0.5N0.5) matrix cermets. Int J Refract Met Hard Mater 84:10503810.1016/j.ijrmhm.2019.105038 ↗
8. Rajabi A, Ghazali MJ, Daud AR (2015) Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet—a review. Mater Des 67:95–10610.1016/j.matdes.2014.10.081 ↗
9. Lin N, Zhao L, Zou J, Ma C, Wang Z, He Y (2019) Improvement in densification process and properties of Ti (C, N)-based cermets with vanadium carbide addition. Ceram Int 45:2692–270010.1016/j.ceramint.2018.10.210 ↗
10. Xiong H, Xie D, Chen J et al (2019) Ti(C, N)-based cermets with strengthened interfaces: roles of secondary cubic carbides. J Am Ceram Soc 00:1–11
11. Lemboub S, Boudebane S, Gotor FJ et al (2018) Core-rim structure formation in TiC-Ni based cermets fabricated by a combined thermal explosion/hot-pressing process. Int J Refract Met Hard Mater 70:84–9210.1016/j.ijrmhm.2017.09.014 ↗
12. Xiong Z, Ye J, Liu Y, Yang X, Cao Q (2020) Study on the phase evolution, microstructure and densification behavior of (Ti, M)(C, N)-based cermets. Mater Chem Phys 240:12224910.1016/j.matchemphys.2019.122249 ↗
13. Zhou W, Zheng Y, Zhao Y (2018) Study on microstructure and properties of Ti(C, N)-based cermets with dual grain structure. Ceram Int 44(12):14487–1449410.1016/j.ceramint.2018.05.063 ↗
14. Kim ES, Kang S (2001) Precipitation phenomena in MC-Ni-Co cermet systems. J Mater Sci 36:405–410. https://doi.org/10.1023/A:100487652881110.1023/A:1004876528811 ↗
15. Ahn SY, Kang S (2000) Formation of core/rim structures in Ti(C, N)-WC-Ni cermets via a dissolution and precipitation process. J Am Ceram Soc 83:1489–149410.1111/j.1151-2916.2000.tb01415.x ↗
16. Kim S, Min K, Kang S (2003) Rim structure in Ti(C0.7N0.3)-WC-Ni cermets. J Am Ceram Soc 86:1761–176610.1111/j.1151-2916.2003.tb03551.x ↗
17. Park S, Kang S (2005) Toughened ultra-fine (Ti, W)(CN)–Ni cermets. Scrip Mater 52:129–13310.1016/j.scriptamat.2004.09.017 ↗
18. Kim J, Seo M, Kang S (2011) Microstructure and mechanical properties of Ti-based solid-solution cermets. Mater Sci Eng A 528:2517–252110.1016/j.msea.2010.11.076 ↗
19. Kim J, Kang S (2011) Microstructure evolution and mechanical properties of (Ti0.93W0.07)C–xWC–20Ni cermets. Mater Sci Eng A 528:3090–309510.1016/j.msea.2010.12.038 ↗
20. Kwon H, Suh CY, Kim W (2015) Preparation of a highly toughened (Ti, W)C-20Ni cermet through in situ formation of solid solution and WC whiskers. Ceram Int 41:4223–422610.1016/j.ceramint.2014.11.031 ↗
21. Moon A, Suh C, Kwon H (2018) Microstructure and mechanical properties of ultrafine (Ti, Mo, W, Nb, Zr, Ta)(CN)–Ni composites prepared using the stabilized (Ti, Mo, W, Nb, Zr, Ta)(CN) phase. J Alloys Compd 732(25):838–84410.1016/j.jallcom.2017.10.281 ↗
22. Pohan RM, Gwalani B, Lee J et al (2018) Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy. Mater Chem Phys 210(1):62–7010.1016/j.matchemphys.2017.09.013 ↗
23. Bhaskar UK, Pradhan SK (2012) One-step mechanosynthesis of nano structured Ti(CxN1-x) cermets at room temperature and their microstructure characterization. Mater Chem Phys 134(2):1088–109610.1016/j.matchemphys.2012.03.117 ↗
24. Borrell A, Salvador MD, García-Rocha V (2012) Spark plasma sintering of TiyNb1-yCxN1-x monolithic ceramics obtained by mechanically induced self-sustaining reaction. Mater Sci Eng A 543:173–17910.1016/j.msea.2012.02.071 ↗
25. Chicardi E, Torres Y, Córdoba JM, Hvizdos P, Gotor FJ (2014) Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions. Mater Des 53:435–44410.1016/j.matdes.2013.07.039 ↗
26. Córdoba JM, Chicardi E, Gotor FJ (2012) Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions. Chem Eng J 192:58–6610.1016/j.cej.2012.03.046 ↗
27. Córdoba JM, Sayagués MJ, Alcala MD, Gotor FJ (2007) Monophasic nanostructured powders of niobium, tantalum, and hafnium carbonitrides synthesized by a mechanically induced self-propagating reaction. J Am Ceram Soc 90:381–38710.1111/j.1551-2916.2006.01395.x ↗
28. Shetty DK, Wright IG, Mincer PN, Clauer AH (1985) Indentation fracture of WC-Co cermets. J Mater Sci 20:1873–1882. https://doi.org/10.1007/BF0055529610.1007/BF00555296 ↗
29. Razavi M, Rahimipour MR, Kaboli R (2008) Synthesis of TiC nanocomposite powder from impure TiO2 and carbon black by mechanically activated sintering. J Alloys Comp 460:694–69810.1016/j.jallcom.2007.06.080 ↗
30. Sheng L, Yang F, Guo J, Xi T, Ye H (2013) Investigation on NiAl–TiC–Al2O3 composite prepared by self-propagation high temperature synthesis with hot extrusion. Compos B Eng 45(1):785–79110.1016/j.compositesb.2012.05.038 ↗
31. Park C, Nam S, Kang S (2016) Carbide/binder interfaces in Ti(CN)–(Ti, W)C/(Ti, W)(CN)-based cermets. J Alloys Comp 657(5):671–67710.1016/j.jallcom.2015.10.121 ↗
32. Yang Q, Xiong W, Zhang G, Huang B (2015) Grain growth in Ti(C, N)-based cermets During liquid-phase sintering. J Am Ceram Soc 98(3):1005–101210.1111/jace.13359 ↗
33. Zhou S, Zhao W, Xiong W, Hong Z (2009) Thermodynamics of the formation of contiguity between ceramic grains and interface structures of Ti(C, N)-based cermets. Int J Refract Met Hard Mater 27(4):740–74610.1016/j.ijrmhm.2008.12.005 ↗
34. Dong D, Yang W, Xiong H, Zhang L, Shi K, Liao J (2020) Ti (C, N)-based cermets with fine grains and uniformly dispersed binders: Effect of the Ni–Co based binders. Ceram Int 46(2020):6300–631010.1016/j.ceramint.2019.11.102 ↗
35. Zhang G, Zheng Y, Zhang J, Ke Z, Xu X, Wu H (2020) Interfaces and mechanical properties of dual grain structure Ti(C, N)-based cermets prepared by in situ reduction of TiO2. J Alloys Compd. https://doi.org/10.1016/j.jallcom.2020.15447610.1016/j.jallcom.2020.154476 ↗
36. Laoui T, Zou H, Van der Biest O (1992) Analytical electron microscopy of the core/rim structure in titanium carbonitride cermets. Int J Refract Met Hard Mater 11:207–21210.1016/0263-4368(92)90047-6 ↗
37. Mari D, Bolognini S, Feusier G, Cutard T, Viatte T, Benoit W (2003) TiMoCN based cermets. Part II. Microstructure and room temperature mechanical properties. Int J Refract Met Hard Mater 21:47–5310.1016/S0263-4368(03)00011-8 ↗
38. Liu N, Xu Y, Li Z, Chen M, Li G, Zhang L (2003) Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification. Ceram Int 29(8):919–92510.1016/S0272-8842(03)00046-4 ↗
39. Dunmead S, Readey D, Semler C, Birch Hol J (1989) Kinetics of combustion synthesis in the Ti-C and Ti-C-Ni systems. J Am Ceram Soc 72:2318–232410.1111/j.1151-2916.1989.tb06083.x ↗
40. Zhang XH, Han JC, Du SY, Wood JV (2000) Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction. J Mater Sci 35:1925–1930. https://doi.org/10.1023/A:100471440212810.1023/A:1004714402128 ↗
41. Qi Q, Liu Y, Zhang H (2016) The formation mechanism of TiC particles in TiC/Ni composites fabricated by in situ reactive infiltration. J Mater Sci 51:7038–7045. https://doi.org/10.1007/s10853-016-9994-410.1007/s10853-016-9994-4 ↗
42. Chen X, Xiong W, Yao Z, Zhang G, Chen S, Yang Q (2014) Characterization of Ti-based solid solution cermets prepared by mechanically induced self-sustained reaction and subsequent pressureless sintering. J Alloys Compd 583:523–52910.1016/j.jallcom.2013.08.120 ↗
43. Kim YK, Shim JH, Cho YW, Yang HS, Park JK (2004) Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti, Mo)C–Ni cermet without core-rim structure. Int J Refract Met Hard Mater 22:193–19610.1016/j.ijrmhm.2004.06.004 ↗
44. Agnew SR, Keene JI, Dong L, Shamsujjoha M, O'Masta MR, Wadley HNG (2017) Microstructure characterization of large TiC-Mo-Ni cermet tiles. Int J Refract Met Hard Mater 68:84–9510.1016/j.ijrmhm.2017.07.004 ↗
45. Zhou S, Zhao W, Xiong W (2009) Microstructure and properties of the cermets based on Ti(C, N). Int J Refract Met Hard Mater 27:26–3210.1016/j.ijrmhm.2008.01.011 ↗
46. Xu X, Ya Z, Zhang G, Ke Z, Ha Wu, Yang Z, Zhou W (2020) Microstructure and mechanical properties of Ti(C, N)-based cermets fabricated using Ni-coated mixed powders. Ceram Int. https://doi.org/10.1016/j.ceramint.2020.03.27610.1016/j.ceramint.2020.03.276 ↗