journal article·2019-10

Mechanical and fracture behaviour of the three-scale hierarchy structure in As-deposited and annealed nanocrystalline electrodeposited Ni–Fe alloys

G. Maizza, H. Eom, M. Lee, T. H. Yim, E. Nakagawa, R. Pero, T. Ohmura

Journal of Materials Science· Volume 54· Issue 20
Publisher page

Abstract

The growing interest in nanocrystalline (nc) materials is driven by their outstanding combination of mechanical and functional properties. Electrodeposited nc Ni–Fe alloys have received considerable attention, thanks to their unique strength and to their thermal and magnetic properties. However, the research on the relationship between microstructure, mechanical properties and fracture behaviour, under both As-deposited and annealed conditions, is still rather limited. In this paper, 48 wt% Fe electrodeposited nc Ni–Fe alloy foils were tested, by means of tensile and nanoindentation tests, under both As-deposited and annealed conditions (300–800 °C). High-resolution FESEM images revealed that the As-deposited microstructure consisted of an unforeseen, evident anisotropic nested three-scale hierarchy nc structure, namely from the nanocrystalline (~ 10 nm) to the sub-micron (up to 250 nm) scale, across a mesostructure (155–165 nm), here denoted as the characteristic grain structure. Such a nested nc grain structure of the electrodeposited nc Ni–Fe alloy, which resembles the one of a corncob (corncob-like structure), explained the unique anisotropic mechanical properties of the foils after nanoindentation, tensile and oblique-bending fracture tests. The mechanical properties (i.e. tensile strength, elongation, yield strength and hardness) of the foils annealed up to 320 °C were found to be improved, in comparison with the As-deposited counterparts, whereas those annealed above 320 °C were deteriorated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Torabinejad V, Aliofkhazraei M, Assareh S, Allahyarzadeh MH, Rouhaghdam AS (2017) Electrodeposition of Ni-Fe alloys, composites, and nano coatings—a review. J Alloys Compd 691:841–85910.1016/j.jallcom.2016.08.329 ↗
2. Mazza E, Abel S, Dual J (1996) Experimental determination of mechanical properties of Ni and Ni–Fe microbars. Microsyst Technol 2(4):197–20210.1007/s005420050044 ↗
3. Kurmanaeva L, McCrea J, Jian J, Fiebig J, Wang H, Mukherjee AK, Lavernia EJ (2016) Influence of layer thickness on mechanical properties of multilayered NiFe samples processed by electrodeposition. Mater Des 90:389–39510.1016/j.matdes.2015.10.137 ↗
4. Torabinejad V, Aliofkhazraei M, Rouhaghdam AS, Allahyarzadeh MH (2016) Functionally graded coating of Ni–Fe fabricated by pulse electrodeposition. J Mater Eng Perform 25(12):5494–550110.1007/s11665-016-2376-x ↗
5. Hibbard GD, Erb U, Aust KT, Klement U, Palumbo G (2002) Thermal stability of nanostructured electrodeposits. Mater Sci Forum 386:387–39610.4028/www.scientific.net/MSF.386-388.387 ↗
6. McCrea JL, Palumbo G, Hibbard GD, Erb U (2003) Properties and applications for electrodeposited nanocrystalline Fe–Ni alloys. Rev Adv Mater Sci 5(3):252–258
7. Tabakovic I, Inturi V, Thurn J, Kief M (2010) Properties of Ni1−xFex (0.1 < x < 0.9) and Invar (x = 0.64) alloys obtained by electrodeposition. Electrochim Acta 55(22):6749–675410.1016/j.electacta.2010.05.095 ↗
8. Nagayama T, Yamamoto T, Nakamura T (2016) Thermal expansions and mechanical properties of electrodeposited Fe–Ni alloys in the Invar composition range. Electrochim Acta 205:178–18710.1016/j.electacta.2016.04.089 ↗
9. Li H, Jiang F, Ni S, Li L, Sha G, Liao X, Ringer SP, Choo H, Liaw PK, Misra A (2011) Mechanical behaviors of As-deposited and annealed nanostructured Ni–Fe alloys. Scr Mater 65(1):1–410.1016/j.scriptamat.2011.03.029 ↗
10. Chakraborty S, Settem M, Sant SB (2013) Evolution of texture and nature of grain growth on annealing nanocrystalline Ni and Ni-18.5% Fe in air. Mater Exp 3(2):99–10810.1166/mex.2013.1117 ↗
11. Xue Y, Hillman K, Veazie D (2003) Thermal-mechanical evaluation of plated electro-magnetic NiFe for MEMS generators. In: MRS online proceedings library archive 795, pp 1–610.1557/PROC-795-U11.35 ↗
12. Ren HR, Guo L, Guo ZC (2017) Effects of annealing temperature on the microstructure and mechanical properties of electrodeposited Ni–Fe alloy foils. High Temp Mater Process (London) 36(3):223–23210.1515/htmp-2015-0247 ↗
13. Chang WS, Wei Y, Guo JM, He FJ (2012) Thermal stability of Ni–Fe alloy foils continuously electrodeposited in a fluorborate bath. Open J Met 2(01):18–2310.4236/ojmetal.2012.21003 ↗
14. Li H, Ebrahimi F (2006) Tensile behavior of a nanocrystalline Ni–Fe alloy. Acta Mater 54(10):2877–288610.1016/j.actamat.2006.02.033 ↗
15. Li H, Liaw PK, Choo H, Misra A (2008) Effect of grain orientation on ductility in a nanocrystalline Ni–Fe alloy. Appl Phys Lett 93(5):1–3
16. Qin XY, Cheong SH, Lee JS (2003) Tensile behavior of nanocrystalline Ni–Fe alloy. Mater Sci Eng A 363(1–2):62–6610.1016/S0921-5093(03)00497-0 ↗
17. Li H, Ebrahimi F (2005) Ductile-to-brittle transition in nanocrystalline metals. Adv Mater 17(16):1969–197210.1002/adma.200500436 ↗
18. Li HQ, Ebrahimi F (2003) An investigation of thermal stability and microhardness of electrodeposited nanocrystalline nickel-21% iron alloys. Acta Mater 51(13):3905–391310.1016/S1359-6454(03)00215-5 ↗
19. Seo JH, Kim JK, Yim TH, Park YB (2005) Textures and grain growth in nanocrystalline Fe–Ni alloys. Mater Sci Forum 475:3483–348810.4028/www.scientific.net/MSF.475-479.3483 ↗
20. Thuvander M, Abraham M, Cerezo A, Smith GDW (2001) Thermal stability of electrodeposited nanocrystalline nickel and iron–nickel alloys. Mater Sci Technol 17(8):961–97010.1179/026708301101510799 ↗
21. Seo JH, Kim JK, Park YB (2007) Abnormal grain growth during annealing in nanocrystalline Fe–Ni alloys. Mater Sci Forum 558:1279–128210.4028/www.scientific.net/MSF.558-559.1279 ↗
22. Fan GJ, Wang YD, Fu LF, Choo H, Liaw PK, Ren Y, Browning ND (2006) Orientation-dependent grain growth in a bulk nanocrystalline alloy during the uniaxial compressive deformation. Appl Phys Lett 88(17):1–310.1063/1.2200589 ↗
23. Chan T, Zhou Y, Brooks I, Palumbo G, Erb U (2014) Localized strain and heat generation during plastic deformation in nanocrystalline Ni and Ni–Fe. J Mater Sci 49(10):3847–3859. https://doi.org/10.1007/s10853-014-8099-110.1007/s10853-014-8099-1 ↗
24. Fan GJ, Fu LF, Choo H, Liaw PK, Browning ND (2006) Uniaxial tensile plastic deformation and grain growth of bulk nanocrystalline alloys. Acta Mater 54(18):4781–479210.1016/j.actamat.2006.06.016 ↗
25. Matsui I, Kawakatsu T, Takigawa Y, Uesugi T, Higashi K (2014) Fabrication of bulk nanocrystalline Fe–Ni alloys with high strength and high ductility by an electrodeposition. Mater Lett 116:71–7410.1016/j.matlet.2013.10.108 ↗
26. Cheung C, Djuanda F, Erb U, Palumbo G (1995) Electrodeposition of nanocrystalline Ni–Fe alloys. Nanostruct Mater 5(5):513–52310.1016/0965-9773(95)00264-F ↗
27. Ebrahimi F, Li HQ (2003) Structure and properties of electrodeposited nanocrystalline FCC Ni–Fe alloys. Rev Adv Mater Sci 5(2):134–138
28. Monaco L, Avramovic-Cingara G, Palumbo G, Erb U (2018) Corrosion behaviour of electrodeposited nanocrystalline nickel-iron (NiFe) alloys in dilute H2SO4. Corros Sci 130:103–11210.1016/j.corsci.2017.10.018 ↗
29. Li H, Ebrahimi F, Choo H, Liaw PK (2006) Grain size dependence of tensile behavior in nanocrystalline Ni–Fe alloys. J Mater Sci 41(22):7636–7642. https://doi.org/10.1007/s10853-006-0856-310.1007/s10853-006-0856-3 ↗
30. Martienssen W, Warlimont H (eds) (2006) Springer handbook of condensed matter and materials data. Springer, Berlin
31. Vinogradov A, Hashimoto S, Kopylov VI (2003) Enhanced strength and fatigue life of ultra-fine grain Fe–36Ni Invar alloy. Mater Sci Eng A 355(1–2):277–28510.1016/S0921-5093(03)00082-0 ↗
32. Schuh CA, Nieh TG, Yamasaki T (2002) Hall-Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel. Scr Mater 46(10):735–74010.1016/S1359-6462(02)00062-3 ↗
33. Giallonardo JD, Erb U, Aust KT, Palumbo G (2011) The influence of grain size and texture on the Young’s modulus of nanocrystalline nickel and nickel–iron alloys. Philos Mag 91(36):4594–460510.1080/14786435.2011.615350 ↗
34. Byun MH, Cho JW, Han BS, Kim YK, Song YS (2006) Material characterization of electroplated nanocrystalline nickel–iron alloys for micro electronic mechanical system. Jpn J Appl Phys 45(9R):7084–709010.1143/JJAP.45.7084 ↗
35. Li MA, Zhang L, Li XB, Li ZY, Zhou KC (2015) Fabrication and characterization of electrodeposited nanocrystalline Ni–Fe alloys for NiFe2O4 spinel coatings. Trans Nonferrous Met Soc China 25(1):146–15310.1016/S1003-6326(15)63589-0 ↗
36. Leith SD, Ramli S, Schwartz DT (1999) Characterization of Nix Fe1−x (0.10 < x < 0.95) Electrodeposition from a Family of Sulfamate‐Chloride Electrolytes. J Electrochem Soc 146(4):1431–143510.1149/1.1391781 ↗
37. Buchheit TE, Goods SH, Kotula PG, Hlava PF (2006) Electrodeposited 80Ni–20Fe (Permalloy) as a structural material for high aspect ratio microfabrication. Mater Sci Eng A 432(1–2):149–15710.1016/j.msea.2006.05.149 ↗
38. Wang YM, Ott RT, Van Buuren T, Willey TM, Biener MM, Hamza AV (2012) Controlling factors in tensile deformation of nanocrystalline cobalt and nickel. Phys Rev B 85(1):1–1810.1103/PhysRevB.85.014101 ↗
39. Goods SH, Kelly JJ, Talin AA, Michael JR, Watson RM (2006) Electrodeposition of ni from low-temperature sulfamate electrolytes II. Properties and structure of electrodeposits. J Electrochem Soc 153(5):C325–C33310.1149/1.2181447 ↗
40. Huang YY, Zhou YC, Pan Y (2009) Simulation of kinetically limited growth of electrodeposited polycrystalline Ni films. Phys E Low-dimens Syst Nanost 41(9):1673–167810.1016/j.physe.2009.06.001 ↗
41. Cheng S, Zhao Y, Guo Y, Li Y, Wei Q, Wang X, Ren Y, Liaw PK, Choo H, Lavernia EJ (2009) High plasticity and substantial deformation in nanocrystalline NiFe alloys under dynamic loading. Advanced Materials 21(48):5001–500410.1002/adma.200901991 ↗
42. Huang CH, Jan JR, Shu WY, Wu HM (2001) Study of sulfur embrittlement in electroformed Ni-Re alloy. J Mater Sci 36(18):4385–4391. https://doi.org/10.1023/A:101796221515110.1023/A:1017962215151 ↗
43. Ebrahimi F, Li H (2006) Grain growth in electrodeposited nanocrystalline fcc Ni–Fe alloys. Scr Mater 55(3):263–26610.1016/j.scriptamat.2006.03.053 ↗
44. Czerwinski F, Li H, Megret M, Szpunar JA, Clark DG, Erb U (1997) The evolution of texture and grain size during annealing of nanocrystalline Ni-45% Fe electrodeposits. Scr Mater 37(12):1967–197210.1016/S1359-6462(97)00390-4 ↗
45. Klement U, da Silva M, Skrotzki W (2008) On the orientations of abnormally grown grains in nanocrystalline Ni and Ni–Fe. J Microsc 230(3):455–46310.1111/j.1365-2818.2008.02005.x ↗
46. Park YB, Park J, Ha CS, Yim TH (2002) Texture evolution during the annealing of nanocrystalline permalloy. Mater Sci Forum 408:919–92410.4028/www.scientific.net/MSF.408-412.919 ↗
47. Wang N, Wang Z, Aust KT, Erb U (1997) Isokinetic analysis of nanocrystalline nickel electrodeposits upon annealing. Acta Mater 45(4):1655–166910.1016/S1359-6454(96)00254-6 ↗
48. Aleshin AN (2008) Role of grain-boundary diffusion in the grain growth in nanocrystalline nickel. Russ Metall (Metally) 2008(4):286–29310.1134/S0036029508040034 ↗
49. Liu Y, Liu L, Shen B, Hu W (2011) A study of thermal stability in electrodeposited nanocrystalline Fe–Ni invar alloy. Mater Sci Eng A 528(18):5701–570510.1016/j.msea.2011.04.052 ↗
50. Klement U, Erb U, El-Sherik AM, Aust KT (1995) Thermal stability of nanocrystalline Ni. Mater Sci Eng A 203(1–2):177–18610.1016/0921-5093(95)09864-X ↗
51. Lee DN (2007) Changes in lattice constants and orientation of <100> and <111> grains in nanocrystalline Ni and Ni–Fe electrodeposits after annealing. Mater Sci Forum 539:149–15410.4028/www.scientific.net/MSF.539-543.149 ↗
52. Lee M, Ahn J, Yim TH (2018) Effects of electroformed Fe–Ni substrate textures on light-trapping in thin film solar cells. Int J Electrochem Sci 13:5612–561910.20964/2018.06.27 ↗
53. Zhang YH, Ding GF, Cai YL, Wang H, Cai B (2006) Electroplating of low stress permalloy for MEMS. Mater Charact 57(2):121–12610.1016/j.matchar.2005.12.016 ↗
54. Bhandari A, Hearne SJ, Sheldon BW, Soni SK (2009) Microstructural origins of saccharin-induced stress reduction in electrodeposited Ni. J Electrochem Soc 156(8):D279–D28210.1149/1.3142363 ↗
55. Kim SH, Sohn HJ, Joo YC, Kim YW, Yim TH, Lee HY, Kang T (2005) Effect of saccharin addition on the microstructure of electrodeposited Fe–36 wt% Ni alloy. Surf Coat Technol 199(1):43–4810.1016/j.surfcoat.2004.11.035 ↗
56. Chaudhari AK, Singh VB (2018) A review of fundamental aspects, characterization and applications of electrodeposited nanocrystalline iron group metals, Ni-Fe alloy and oxide ceramics reinforced nanocomposite coatings. J Alloys Compd 751:194–21410.1016/j.jallcom.2018.04.090 ↗
57. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–158310.1557/JMR.1992.1564 ↗
58. Tabor D (1951) The hardness and strength of metals. J Inst Met 79:1–18
59. Gorczyca I, Christensen NE, Perlin P, Grzegory I, Jun J, Bockowski M (1991) High pressure phase transition in aluminium nitride. Solid State Commun 79(12):1033–103410.1016/0038-1098(91)90004-F ↗
60. Grimmett DL, Schwartz M, Nobe K (1993) A comparison of DC and pulsed Fe–Ni alloy deposits. J Electrochem Soc 140(4):973–97810.1149/1.2056238 ↗
61. Vicenzo A (2013) Structure and mechanical properties of electrodeposited nanocrystalline Ni–Fe alloys. J Electrochem Soc 160(11):D570–D57710.1149/2.109311jes ↗
62. Chauhan M, Mohamed FA (2006) Investigation of low temperature thermal stability in bulk nanocrystalline Ni. Mater Sci Eng A 427(1–2):7–1510.1016/j.msea.2005.10.039 ↗
63. Li H, Ebrahimi F (2004) Transition of deformation and fracture behaviors in nanostructured face-centered-cubic metals. Appl Phys Lett 84(21):4307–430910.1063/1.1756198 ↗
64. Cao ZH, Li PY, Jiang ZH, Meng XK (2011) Rolling deformation induced reduction of rate sensitivity and enhancement of hardness in nanocrystalline NiFe alloys. J Phys D Appl Phys 44(29):34–3710.1088/0022-3727/44/29/295403 ↗
65. Li L, Ungár T, Wang YD, Fan GJ, Yang YL, Jia N, Ren Y, Tichy G, Lendvai J, Choo H, Liaw PK (2009) Simultaneous reductions of dislocation and twin densities with grain growth during cold rolling in a nanocrystalline Ni–Fe alloy. Scr Mater 60(5):317–33210.1016/j.scriptamat.2008.10.031 ↗
66. Shen TD, Schwarz RB, Feng S, Swadener JG, Huang JY, Tang M, Zhang J, Vogel SC, Zhao Y (2007) Effect of solute segregation on the strength of nanocrystalline alloys: Inverse Hall-Petch relation. Acta Mater 55(15):5007–501310.1016/j.actamat.2007.05.018 ↗
67. Van Petegem S, Zimmermann J, Brandstetter S, Sauvage X, Legros M, Van Swygenhoven H (2013) Microstructure and deformation mechanisms in nanocrystalline Ni–Fe. Part I. Microstructure. Acta Mater 61(15):5835–584510.1016/j.actamat.2013.06.031 ↗
68. Wang YB, Ho JC, Cao Y, Liao XZ, Li HQ, Zhao YH, Zhu YT (2009) Dislocation density evolution during high pressure torsion of a nanocrystalline Ni–Fe alloy. Appl Phys Lett 94(9):1–3
69. Torrents A, Yang H, Mohamed FA (2010) Effect of annealing on hardness and the modulus of elasticity in bulk nanocrystalline nickel. Metall Mater Trans A 41(3):621–63010.1007/s11661-009-0147-0 ↗
70. Sanders PG, Eastman JA, Weertman JR (1997) Elastic and tensile behavior of nanocrystalline copper and palladium. Acta Mater 45(10):4019–402510.1016/S1359-6454(97)00092-X ↗