Acoustic thermoset open-cell foams produced by particulate leaching process
Source abstract
Abstract
The purpose of this paper is to produce acoustic thermoset open-cell foam with both attractive acoustical and mechanical properties using a simple and versatile process. The manufacturing process is based on particulate leaching and is fully controlled to provide predictable foam microstructure. Microscopic and X-ray microtomographic analyses were used to validate the interconnectivity of the porosity as well as the degree of purity of the produced materials. It was shown that the porosity and the thickness depend on the compaction pressure, which is the determinant processing parameter. An optimization model based on the well-known JCAPL model was used to predict the physical properties of the foams microstructure. The acoustical and mechanical properties are shown to be dependent on particle size and compaction pressure. The thermoset foams can be used as effective absorbing acoustic materials with broadband absorption capabilities, combined with compressive modulus as high as 88 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Acoustic Wave Phenomena Research · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Girvin R (2009) Aircraft noise-abatement and mitigation strategies. J Air Transp Manag 15(1):14–2210.1016/j.jairtraman.2008.09.012 ↗
2. Bernhard RJ (1994) The state of the art of active-passive noise control. In: Noise Con 1994: proceedings of the 1994 national conference on noise control engineering
3. Peake N, Crighton DG (2000) Active control of sound. Annu Rev Fluid Mech 32(1):137–16410.1146/annurev.fluid.32.1.137 ↗
4. Gvozdkova S, Shvartsburg L (2017) Analysis of sources and methods for reducing noise by minimizing vibrations of engineering technological processes. Procedia Eng 206:958–96410.1016/j.proeng.2017.10.578 ↗
5. Ishizaki K, Komarneni S, Nanko M (2013) Porous materials: process technology and applications, vol 4. Springer, Berlin
6. Ramsteiner F, Fell N, Forster S (2001) Testing the deformation behaviour of polymer foams. Polym Test 20(6):661–67010.1016/S0142-9418(00)00090-8 ↗
7. Lee W (2000) Cellular solids, structure and properties. Mater Sci Technol 16(2):233
8. Banhart J (2001) Manufacture, characterisation and application of cellular metals and metal foams. Prog Mater Sci 46(6):559–63210.1016/S0079-6425(00)00002-5 ↗
9. Tarnow V (1996) Airflow resistivity of models of fibrous acoustic materials. J Acoust Soc Am 100(6):3706–371310.1121/1.417233 ↗
10. Perrot C, Chevillotte F, Panneton R (2008) Dynamic viscous permeability of an open-cell aluminum foam: computations versus experiments. J Appl Phys 103(2):02490910.1063/1.2829774 ↗
11. Olny X, Boutin C (2003) Acoustic wave propagation in double porosity media. J Acoust Soc Am 114(1):73–8910.1121/1.1534607 ↗
12. Chevillotte F, Perrot C, Guillon E (2013) A direct link between microstructure and acoustical macro-behavior of real double porosity foams. J Acoust Soc Am 134(6):4681–469010.1121/1.4824842 ↗
13. Ghaffari Mosanenzadeh S, Doutres O, Naguib HE, Park CB, Atalla N (2015) A semi-empirical model relating micro structure to acoustic properties of bimodal porous material. J Appl Phys 117(3):03430510.1063/1.4905834 ↗
14. Attenborough K (2018) Microstructures for lowering the quarter wavelength resonance frequency of a hard-backed rigid-porous layer. Appl Acoust 130:188–19410.1016/j.apacoust.2017.09.022 ↗
15. Janik H, Marzec M (2015) A review: fabrication of porous polyurethane scaffolds. Mater Sci Eng, C 48:586–59110.1016/j.msec.2014.12.037 ↗
16. Rezabeigi E, Wood-Adams PM, Drew RA (2014) Production of porous polylactic acid monoliths via nonsolvent induced phase separation. Polymer 55(26):6743–675310.1016/j.polymer.2014.10.063 ↗
17. Aubert J, Clough R (1985) Low-density, microcellular polystyrene foams. Polymer 26(13):2047–205410.1016/0032-3861(85)90186-7 ↗
18. Dehghani F, Annabi N (2011) Engineering porous scaffolds using gas-based techniques. Curr Opin Biotechnol 22(5):661–66610.1016/j.copbio.2011.04.005 ↗
19. Draghi L, Resta S, Pirozzolo M, Tanzi M (2005) Microspheres leaching for scaffold porosity control. J Mater Sci Mater Med 16(12):1093–1097. https://doi.org/10.1007/s10856-005-4711-x10.1007/s10856-005-4711-x ↗
20. Zhou Q, Gong Y, Gao C (2005) Microstructure and mechanical properties of poly (L-lactide) scaffolds fabricated by gelatin particle leaching method. J Appl Polym Sci 98(3):1373–137910.1002/app.22289 ↗
21. Sin D, Miao X, Liu G, Wei F, Chadwick G, Yan C, Friis T (2010) Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation. Mater Sci Eng, C 30(1):78–8510.1016/j.msec.2009.09.002 ↗
22. Hou Q, Grijpma DW, Feijen J (2003) Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique. Biomaterials 24(11):1937–194710.1016/S0142-9612(02)00562-8 ↗
23. Ghaffari Mosanenzadeh S, Naguib HE, Park CB, Atalla N (2013) Development, characterization, and modeling of environmentally friendly open-cell acoustic foams. Polym Eng Sci 53(9):1979–198910.1002/pen.23443 ↗
24. Zhao P, Zhou Q, Deng YY, Zhu RQ, Gu Y (2014) Reaction induced phase separation in thermosetting/thermosetting blends: effects of imidazole content on the phase separation of benzoxazine/epoxy blends. RSC Adv 4(106):61634–6164210.1039/C4RA10484F ↗
25. Patel H, Bonde M, Srinivasan G (2011) Biodegradable polymer scaffold for tissue engineering. Trends Biomater Artif Organs 25(1):20–29
26. Hung KC, Tseng CS, Hsu Sh (2014) Synthesis and 3D printing of biodegradable polyurethane elastomer by a water-based process for cartilage tissue engineering applications. Adv Healthc Mater 3(10):1578–158710.1002/adhm.201400018 ↗
27. Yeong W-Y, Chua C-K, Leong K-F, Chandrasekaran M (2004) Rapid prototyping in tissue engineering: challenges and potential. Trends Biotechnol 22(12):643–65210.1016/j.tibtech.2004.10.004 ↗
28. Fotsing ER, Dubourg A, Ross A, Mardjono J (2019) Acoustic properties of periodic microstructures obtained by additive manufacturing. Appl Acoust 148:322–33110.1016/j.apacoust.2018.12.030 ↗
29. De Vries D (2009) Characterization of polymeric foams. Eindhoven University of Technology
30. Marmottant A, Salvo L, Martin C, Mortensen A (2008) Coordination measurements in compacted NaCl irregular powders using X-ray microtomography. J Eur Ceram Soc 28(13):2441–244910.1016/j.jeurceramsoc.2008.03.041 ↗
31. Allard J, Atalla N (2009) Propagation of Sound in porous media: modelling sound absorbing materials 2e. Wiley, London10.1002/9780470747339 ↗
32. Niskanen M, Groby J-P, Duclos A, Dazel O, Le Roux J, Poulain N, Huttunen T, Lähivaara T (2017) Deterministic and statistical characterization of rigid frame porous materials from impedance tube measurements. J Acoust Soc Am 142(4):2407–241810.1121/1.5008742 ↗
33. Lavakumar A (2017) Concepts in physical metallurgy. Morgan & Claypool Publishers10.1088/978-1-6817-4473-5 ↗
34. Jaouen L, Brouard B, Atalla N, Langlois C (2005) A simplified numerical model for a plate backed by a thin foam layer in the low frequency range. J Sound Vib 280(3–5):681–69810.1016/j.jsv.2003.12.038 ↗
35. Panneton R, Atalla N (1996) Numerical prediction of sound transmission through finite multilayer systems with poroelastic materials. J Acoust Soc Am 100(1):346–35410.1121/1.415956 ↗