Sintering behavior and reliability characteristics of BaTiO3-based ceramics prepared by different methods
Source abstract
Abstract
Fine-grained BaTiO3-based ceramics with core–shell structures were prepared using the chemical coating method and the solid-state method. The sintering behavior and microstructure evolution were investigated for the samples prepared using different methods. The dielectric properties of modified BaTiO3 ceramics were also investigated, and the TEM–EDS results provided a detailed explanation for the different temperature coefficient of capacitance behaviors. In addition, the insulation resistivity for the ceramic samples under elevated temperature and high voltages was observed. The highly accelerated lifetime test results indicate that the samples prepared by the chemical coating method exhibited higher insulation resistance and a smaller degradation rate. Impedance analysis demonstrated that the grain boundary activation energy was much higher for the samples prepared by the chemical coating method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Kishi H, Mizuno Y, Chazono H (2003) Base-metal electrode-multilayer ceramic capacitors: past, present and future perspectives. Jpn J Appl Phys 42(1):1–1510.1143/JJAP.42.1 ↗
2. Pan M-J, Randall CA (2010) A Brief Introduction to Ceramic Capacitors. IEEE Electr Insul M 26(3):44–5010.1109/MEI.2010.5482787 ↗
3. Sakabe Y, Reynolds T (2002) Base-metal electrode capacitors. Am Ceram Soc Bull 81(10):24–26
4. Yang GY, Dickey EC, Randall CA, Barber DE, Pinceloup P, Henderson MA, Hill RA, Beeson JJ, Skamser DJ (2004) Oxygen nonstoichiometry and dielectric evolution of BaTiO3. Part I—improvement of insulation resistance with reoxidation. J Appl Phys 96(12):749210.1063/1.1809267 ↗
5. Ferkel H, Hellmig RJ (1999) Effect of nanopowder deagglomeration on the densities of nanocrystalline ceramic green bodies and their sintering behaviour. Nanostruct Mater 11(5):617–62210.1016/S0965-9773(99)00348-7 ↗
6. Lee JY, Lee JH, Hong SH, Lee YK, Choi JY (2003) Coating BaTiO3 Nanolayers on Spherical Ni Powders for Multilayer Ceramic Capacitors. Adv Mater 15(19):1655–165810.1002/adma.200305418 ↗
7. Yaseen H, Baltianski S, Tsur Y (2006) Effect of Incorporating Method of Niobium on the Properties of Doped Barium Titanate Ceramics. J Am Ceram Soc 89(5):1584–158910.1111/j.1551-2916.2006.00966.x ↗
8. Tian Z, Wang X, Shu L, Wang T, Song T-H, Gui Z, Li L (2009) Preparation of Nano BaTiO3-Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method. J Am Ceram Soc 92(4):830–83310.1111/j.1551-2916.2009.02979.x ↗
9. Zhang Y, Wang X, Tian Z, Hur K-H, Li L (2011) Preparation of BME MLCC Powders by Aqueous Chemical Coating Method. J Am Ceram Soc 94(10):3286–329010.1111/j.1551-2916.2011.04543.x ↗
10. Zhang Y, Wang X, Kim J-Y, Tian Z, Fang J, Hur K-H, Li L (2012) High Performance BaTiO3-Based BME-MLCC Nanopowder Prepared by Aqueous Chemical Coating Method. J Am Ceram Soc 95(5):1628–163310.1111/j.1551-2916.2011.05038.x ↗
11. Waser R, Baiatu T, Hardtl KH (1990) DC Electrical Degradation of Perovskite-type Titanates: I Ceramics. J Am Ceram Soc 73(6):1645–165310.1111/j.1151-2916.1990.tb09809.x ↗
12. Baiatu T, Waser R, Hardtl KH (1990) DC Electrical Degradation of Perovskite-Type Titanates: III, A Model of the Mechanism. J Am Ceram Soc 73(6):1663–167310.1111/j.1151-2916.1990.tb09811.x ↗
13. Yasukawa K, Nishimura M, Nishihata Y, Ji Mizuki (2007) Core-shell structure analysis of BaTiO3 ceramics by synchrotron X-ray diffraction. J Am Ceram Soc 90(4):1107–111110.1111/j.1551-2916.2007.01537.x ↗
14. Hennings D, Rosenstein G (1984) Temperature-Stable Dielectrics Based on Chemically Inhomogeneous BaTiO3. J Am Ceram Soc 67(4):249–25410.1111/j.1151-2916.1984.tb18841.x ↗
15. Yang GY, Lian GD, Dickey EC, Randall CA, Barber DE, Pinceloup P, Henderson MA, Hill RA, Beeson JJ, Skamser DJ (2004) Oxygen nonstoichiometry and dielectric evolution of BaTiO3. Part II - insulation resistance degradation under applied dc bias. J Appl Phys 96(12):7500–750810.1063/1.1809268 ↗
16. Polotai AV, Fujii I, Shay DP, Yang G-Y, Dickey EC, Randall CA (2008) Effect of Heating Rates during Sintering on the Electrical Properties of Ultra-Thin Ni-BaTiO3 Multilayer Ceramic Capacitors. J Am Ceram Soc 91:2540–254410.1111/j.1551-2916.2008.02517.x ↗
17. Tian Z, Wang X, Zhang Y, Song T-H, Hur KH, Li L (2011) Fabrication of BaTiO3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by a Modified Coating Approach. Jpn J Appl Phys 50(2):02580110.1143/JJAP.50.025801 ↗
18. Chang C-Y, Wang W-N, Huang C-Y, Alford N (2013) Effect of MgO and Y2O3 Doping on the Formation of Core-Shell Structure in BaTiO3 Ceramics. J Am Ceram Soc 96:2570–257610.1111/jace.12372 ↗
19. Sinclair DC, West AR (1989) Impedance and modulus spectroscopy of semiconducting BaTiO3 showing positive temperature-coefficient of resistance. J Appl Phys 66(8):3850–385610.1063/1.344049 ↗
20. Irvine JTS, Sinclair DC, West AR (1990) Electroceramics: characterization by impedance spectroscopy. Adv Mater 2(3):132–13810.1002/adma.19900020304 ↗
21. Vollman M, Waser R (1994) Grain-Boundary Deffect Chemistry of Acceptor-doped Titanates-space-charge Layer Width. J Am Ceram Soc 77(1):235–24310.1111/j.1151-2916.1994.tb06983.x ↗
22. Guo X, Fleig J, Maier J (2001) Separation of Electronic and Ionic Contributions to the Grain Boundary Conductivity in Acceptor-Doped SrTiO3. J Electrochem Soc 148(9):J50–J5310.1149/1.1389344 ↗
23. Jamnik J, Maier J (1999) Treatment of the Impedance of Mixed Conductors Equivalent Circuit Model and Explicit Approximate Solutions. J Electrochem Soc 146(11):4183–418810.1149/1.1392611 ↗
24. Kaneda K, Lee S, Donnelly NJ, Qu W, Randall CA, Mizuno Y (2011) Kinetics of Oxygen Diffusion into Multilayer Ceramic Capacitors During the Re-oxidation Process and its Implications on Dielectric Properties. J Am Ceram Soc 94(11):3934–394010.1111/j.1551-2916.2011.04623.x ↗
25. Donnelly NJ, Randall CA (2010) Mixed conduction and chemical diffusion in a Pb(Zr0.53, Ti0.47)O3 buried capacitor structure. Appl Phys Lett 96(5):05290610.1063/1.3302452 ↗
26. Yoon S-H, Randall CA, Hur K-H (2010) Effect of acceptor concentration on the bulk electrical conduction in acceptor (Mg)-doped BaTiO3. J Appl Phys 107(10):10372110.1063/1.3428457 ↗
27. Lai W, Haile SM (2005) Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: a case study of ceria. J Am Ceram Soc 88(11):2979–299710.1111/j.1551-2916.2005.00740.x ↗
28. Boukamp BA (1986) A Nonlinear Least-Squares Fit Procedure for Analysis of Immittance Data of Electrochemical Systems. Solid State Ion 20(1):31–4410.1016/0167-2738(86)90031-7 ↗