Property investigations of epoxy composites filled by nickel phyllosilicate-decorated graphene oxide
Source abstract
Abstract
To functionalize the surfaces of graphene oxide (GO) and improve its interfacial compatibility to polymers, the nanosheets of nickel phyllosilicate (Ni-PS) self-assembly decorated on GO (GO@Ni-PS) were first synthesized via the combination of one-step solgel and gentle hydrothermal approaches. Then, the as-synthesized GO@Ni-PS was incorporated into epoxy resin (EP) as filler to yield high-performance composites. By structural, morphological and thermal characterizations, we found the GO@Ni-PS has been successfully synthesized and could disperse homogeneously in the EP matrix. The added GO@Ni-PS depicts the positive influences on the thermal stabilities, tribological properties as well as the flame retardancy in high heat flux. Also, the excellent accelerating influence of GO@Ni-PS on the curing behavior of EP was presented and the kinetic analysis quantitatively demonstrated the gradually decreased activation energy of curing along with increased GO@Ni-PS content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Flame retardant materials and properties · Tribology and Wear Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Liu S, Chevali VS, Xu Z, Hui D, Wang H (2018) A review of extending performance of epoxy resins using carbon nanomaterials. Compos B Eng 136:197–21410.1016/j.compositesb.2017.08.020 ↗
2. Liu S, Yan H, Fang Z, Guo Z, Wang H (2014) Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin. RSC Adv 4(36):18652–1865910.1039/C4RA01267D ↗
3. Liu S, Fang Z, Yan H, Wang H (2016) Superior flame retardancy of epoxy resin by the combined addition of graphene nanosheets and DOPO. RSC Adv 6(7):5288–529510.1039/C5RA25988F ↗
4. Wan Y, Chen G, Raman S, Xin J, Li Q, Huang Y, Wang Y, Luo H (2006) Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under dry sliding conditions. Wear 260(9–10):933–94110.1016/j.wear.2005.06.007 ↗
5. Che Y, Sun Z, Zhan R, Wang S, Zhou S, Huang J (2018) Effects of graphene oxide sheets-zirconia spheres nanohybrids on mechanical, thermal and tribological performances of epoxy composites. Ceram Int 44(15):18067–1807710.1016/j.ceramint.2018.07.010 ↗
6. Li P, Zheng Y, Shi T, Wang Y, Li M, Chen C, Zhang J (2016) A solvent-free graphene oxide nanoribbon colloid as filler phase for epoxy-matrix composites with enhanced mechanical, thermal and tribological performance. Carbon 96:40–4810.1016/j.carbon.2015.09.035 ↗
7. Bouibed A, Doufnoune R (2019) Synthesis and characterization of hybrid materials based on graphene oxide and silica nanoparticles and their effect on the corrosion protection properties of epoxy resin coatings. J Adhes Sci Technol 33(8):834–86010.1080/01694243.2019.1571660 ↗
8. Zhang J, Li Z, Zhang L, García Molleja J, Wang D-Y (2019) Bimetallic metal-organic frameworks and graphene oxide nano-hybrids for enhanced fire retardant epoxy composites: a novel carbonization mechanism. Carbon 153:407–41610.1016/j.carbon.2019.07.003 ↗
9. Xu W, Wang X, Wu X, Li W, Cheng C (2019) Organic-Inorganic dual modified graphene: improving the dispersibility of graphene in epoxy resin and the fire safety of epoxy resin. Polym Degrad Stab 165:80–9110.1016/j.polymdegradstab.2019.04.023 ↗
10. Liu Y, Lu M, Wu K, Yao S, Du X, Chen G, Zhang Q, Liang L, Lu M (2019) Anisotropic thermal conductivity and electromagnetic interference shielding of epoxy nanocomposites based on magnetic driving reduced graphene oxide@Fe3O4. Compos Sci Technol 174:1–1010.1016/j.compscitech.2019.02.005 ↗
11. Liu J, Yuen RKK, Hong N, Hu Y (2018) The influence of mesoporous SiO2–graphene hybrid improved the flame retardancy of epoxy resins. Polym Adv Technol 29(5):1478–148610.1002/pat.4259 ↗
12. Wang X, Zhou S, Xing W, Yu B, Feng X, Song L, Hu Y (2013) Self-assembly of Ni–Fe layered double hydroxide/graphene hybrids for reducing fire hazard in epoxy composites. J Mater Chem A 1(13):4383–439010.1039/c3ta00035d ↗
13. Zhang S, Yang J, Chen B, Guo S, Li J, Li C (2017) One-step hydrothermal synthesis of reduced graphene oxide/zinc sulfide hybrids for enhanced tribological properties of epoxy coatings. Surf Coat Technol 326:87–9510.1016/j.surfcoat.2017.07.052 ↗
14. Ramezanzadeh B, Haeri Z, Ramezanzadeh M (2016) A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2–GO); fabrication of SiO2–GO/epoxy composite coating with superior barrier and corrosion protection performance. Chem Eng J 303:511–52810.1016/j.cej.2016.06.028 ↗
15. Haeri SZ, Ramezanzadeh B, Asghari M (2017) A novel fabrication of a high performance SiO2–graphene oxide (GO) nanohybrids: characterization of thermal properties of epoxy nanocomposites filled with SiO2–GO nanohybrids. J Colloid Interface Sci 493:111–12210.1016/j.jcis.2017.01.016 ↗
16. Xu W, Wang X, Liu Y, Li W, Chen R (2018) Improving fire safety of epoxy filled with graphene hybrid incorporated with zeolitic imidazolate framework/layered double hydroxide. Polym Degrad Stab 154:27–3610.1016/j.polymdegradstab.2018.05.022 ↗
17. Liu Y, Babu HV, Zhao J, Goni-Urtiaga A, Sainz R, Ferritto R, Pita M, Wang D-Y (2016) Effect of Cu-doped graphene on the flammability and thermal properties of epoxy composites. Compos Part B Eng 89:108–11610.1016/j.compositesb.2015.11.035 ↗
18. Jiang S-D, Bai Z-M, Tang G, Song L, Stec AA, Hull TR, Zhan J, Hu Y (2014) Fabrication of Ce-doped MnO2 decorated graphene sheets for fire safety applications of epoxy composites: flame retardancy, smoke suppression and mechanism. J Mater Chem A 2(41):17341–1735110.1039/C4TA02882A ↗
19. Wang X, Xing W, Feng X, Yu B, Lu H, Song L, Hu Y (2014) The effect of metal oxide decorated graphene hybrids on the improved thermal stability and the reduced smoke toxicity in epoxy resins. Chem Eng J 250:214–22110.1016/j.cej.2014.01.106 ↗
20. Bian Z, Kawi S (2020) Preparation, characterization and catalytic application of phyllosilicate: a review. Catal Today 339:3–2310.1016/j.cattod.2018.12.030 ↗
21. Liu Q, Shi J, Sun J, Wang T, Zeng L, Jiang G (2011) Graphene and graphene oxide sheets supported on silica as versatile and high-performance adsorbents for solid-phase extraction. Angew Chem Int Ed 50(26):5913–591710.1002/anie.201007138 ↗
22. Zhang Y, Zhou W, Yu H, Feng T, Pu Y, Liu H, Xiao W, Tian L (2017) Self-templated synthesis of nickel silicate hydroxide/reduced graphene oxide composite hollow microspheres as highly stable supercapacitor electrode material. Nanoscale Res Lett 12(1):32510.1186/s11671-017-2094-9 ↗
23. Chen X, Huang Y, Zhang K (2018) Cobalt nanofibers coated with layered nickel silicate coaxial core-shell composites as excellent anode materials for lithium ion batteries. J Colloid Interface Sci 513:788–79610.1016/j.jcis.2017.11.078 ↗
24. Wang QQ, Qu J, Liu Y, Gui CX, Hao SM, Yu Y, Yu ZZ (2015) Growth of nickel silicate nanoplates on reduced graphene oxide as layered nanocomposites for highly reversible lithium storage. Nanoscale 7(40):16805–1681110.1039/C5NR05719A ↗
25. Tang C, Sheng J, Xu C, Khajehbashi SMB, Wang X, Hu P, Wei X, Wei Q, Zhou L, Mai L (2015) Facile synthesis of reduced graphene oxide wrapped nickel silicate hierarchical hollow spheres for long-life lithium-ion batteries. J Mater Chem A 3(38):19427–1943210.1039/C5TA04680G ↗
26. Ou B, Zhou Z, Liu Q, Liao B, Yi S, Ou Y, Zhang X, Li D (2012) Covalent functionalization of graphene with poly(methyl methacrylate) by atom transfer radical polymerization at room temperature. Polym Chem 3(10):2768–277510.1039/c2py20438j ↗
27. Gui CX, Wang QQ, Hao SM, Qu J, Huang PP, Cao CY, Song WG, Yu ZZ (2014) Sandwichlike magnesium silicate/reduced graphene oxide nanocomposite for enhanced Pb2+ and methylene blue adsorption. ACS Appl Mater Interfaces 6(16):14653–1465910.1021/am503997e ↗
28. Hsiao M-C, Ma C-CM, Chiang J-C, Ho K-K, Chou T-Y, Xie X, Tsai C-H, Chang L-H, Hsieh C-K (2013) Thermally conductive and electrically insulating epoxy nanocomposites with thermally reduced graphene oxide-silica hybrid nanosheets. Nanoscale 5(13):5863–587110.1039/c3nr01471a ↗
29. Li HB, Yu MH, Wang FX, Liu P, Liang Y, Xiao J, Wang CX, Tong YX, Yang GW (2013) Amorphous nickel hydroxide nanospheres with ultrahigh capacitance and energy density as electrochemical pseudocapacitor materials. Nat Commun 4:189410.1038/ncomms2932 ↗
30. Wu Y, Chang G, Zhao Y, Zhang Y (2014) Preparation of hollow nickel silicate nanospheres for separation of His-tagged proteins. Dalton Trans 43(2):779–78310.1039/C3DT52084F ↗
31. da Fonseca MG, Silva CR, Barone JS, Airoldi C (2000) Layered hybrid nickel phyllosilicates and reactivity of the gallery space. J Mater Chem 10(3):789–79510.1039/a907804e ↗
32. Szabó T, Berkesi O, Forgó P, Josepovits K, Sanakis Y, Petridis D, Dékány I (2006) Evolution of surface functional groups in a series of progressively oxidized graphite oxides. Chem Mater 18(11):2740–274910.1021/cm060258+ ↗
33. Hou Y, Hu W, Liu L, Gui Z, Hu Y (2018) In-situ synthesized CNTs/Bi2Se3 nanocomposites by a facile wet chemical method and its application for enhancing fire safety of epoxy resin. Compos Sci Technol 157:185–19410.1016/j.compscitech.2018.01.044 ↗
34. Miyagawa H, Mohanty AK, Misra M, Drzal LT (2004) Thermo-Physical and impact properties of epoxy containing epoxidized linseed oil, 1. Macromol Mater Eng 289(7):629–63510.1002/mame.200400004 ↗
35. Minh HN, Chinh NT, Van Thanh TT, Hoang T (2019) Ternary nanocomposites based on epoxy, modified silica, and tetrabutyl titanate: morphology, characteristics, and kinetics of the curing process. J Appl Polym Sci 136(18):4741210.1002/app.47412 ↗
36. Neǐman M, Kovarskaya B, Golubenkova L, Strizhkova A, Levantovskaya I, Akutin M (1962) The thermal degradation of some epoxy resins. J Polym Sci 56(164):383–38910.1002/pol.1962.1205616408 ↗
37. Kim H, Abdala AA, Macosko CW (2010) Graphene/polymer nanocomposites. Macromolecules 43(16):6515–653010.1021/ma100572e ↗
38. Lyon R, Walters R (2002) Heat release capacity: a molecular level fire response parameter. In 7th international symposium on fire safety science. Worcester Polytechnic Institute, Worcester, MA, pp 16–21
39. Potts JR, Dreyer DR, Bielawski CW, Ruoff RS (2011) Graphene-based polymer nanocomposites. Polymer 52(1):5–2510.1016/j.polymer.2010.11.042 ↗
40. Martin-Gallego M, Bernal M, Hernandez M, Verdejo R, López-Manchado MA (2013) Comparison of filler percolation and mechanical properties in graphene and carbon nanotubes filled epoxy nanocomposites. Eur Polym J 49(6):1347–135310.1016/j.eurpolymj.2013.02.033 ↗
41. Li Z, Liu Z, Dufosse F, Yan L, Wang D-Y (2018) Interfacial engineering of layered double hydroxide toward epoxy resin with improved fire safety and mechanical property. Compos B Eng 152:336–34610.1016/j.compositesb.2018.08.094 ↗
42. Guo W, Wang X, Pan Y, Cai W, Xing W, Song L, Hu Y (2019) Polyaniline-coupled graphene/nickel hydroxide nanohybrids as flame retardant and smoke suppressant for epoxy composites. Polym Adv Technol 30:1959–196710.1002/pat.4628 ↗
43. Wang Y, Zhang J (2012) Influences of specimen size and heating mode on the ignitability of polymeric materials in typical small-scale fire test conditions. Fire Mater 36(3):231–24010.1002/fam.1103 ↗
44. Bourbigot S, Duquesne S, Fontaine G, Bellayer S, Turf T, Samyn F (2008) Characterization and reaction to fire of polymer nanocomposites with and without conventional flame retardants. Mol Cryst Liq Cryst 486(1):325–33910.1080/15421400801921983 ↗
45. Baptista R, Mendao A, Rodrigues F, Figueiredo-Pina CG, Guedes M, Marat-Mendes R (2016) Effect of high graphite filler contents on the mechanical and tribological failure behavior of epoxy matrix composites. Theor Appl Fract Mech 85:113–12410.1016/j.tafmec.2016.08.013 ↗
46. Burattin P, Che M, Louis C (1998) Molecular approach to the mechanism of deposition–precipitation of the Ni(II) phase on silica. J Phys Chem B 102(15):2722–273210.1021/jp980018k ↗
47. Nosonovsky M, Mortazavi V (2018) Friction-induced vibrations and self-organization: Mechanics and non-equilibrium thermodynamics of sliding contact, 1st edn. CRC Press, Boca Raton
48. Pawlak Z, Kaldonski T, Pai R, Bayraktare E, Oloyede A (2009) A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles—an additive in porous sliding bearings for a car clutch. Wear 267(5):1198–120210.1016/j.wear.2008.11.020 ↗
49. Yu J, Zhao W, Wu Y, Wang D, Feng R (2018) Tribological properties of epoxy composite coatings reinforced with functionalized C-BN and H-BN nanofillers. Appl Surf Sci 434:1311–132010.1016/j.apsusc.2017.11.204 ↗
50. Zhao Z, Ji J (2014) Synthesis and tribological behaviors of epoxy/phosphazene-microspheres coatings under dry sliding condition. Adv Eng Mater 16(8):988–99510.1002/adem.201300491 ↗
51. Dasari A, Yu Z-Z, Mai Y-W (2009) Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites. Mater Sci Eng R Rep 63(2):31–8010.1016/j.mser.2008.10.001 ↗
52. Li A, Li W, Ling Y, Gan W, Brady MA, Wang C (2016) Effects of silica-coated carbon nanotubes on the curing behavior and properties of epoxy composites. RSC Adv 6(28):23318–2332610.1039/C5RA25182F ↗
53. Zhou T, Wang X, Liu X, Xiong D (2009) Influence of multi-walled carbon nanotubes on the cure behavior of epoxy-imidazole system. Carbon 47(4):1112–111810.1016/j.carbon.2008.12.039 ↗
54. Kissinger HE (1957) Reaction kinetics in differential thermal analysis. Anal Chem 29(11):1702–170610.1021/ac60131a045 ↗
55. Wan J, Gan B, Li C, Molina-Aldareguia J, Li Z, Wang X, Wang D-Y (2015) A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties. J Mater Chem A 3(43):21907–2192110.1039/C5TA02939B ↗
56. Jain R, Choudhary V, Narula A (2007) Studies on the curing kinetics of epoxy resins using mixture of nadic/or maleic anhydride and 4,4′-diaminodiphenyl sulfone. J Therm Anal Calorim 90(2):495–50110.1007/s10973-006-7793-x ↗
57. Sýkora V, Špaček V, Dobáš I (1994) Epoxy resin based on 4,4′-dihydroxydiphenysulfone. I. Synthesis and reaction kinetics with 4,4′-diaminodiphenylmethane and 4,4′-diaminodiphenylsulfone. J Appl Polym Sci 54(10):1463–146710.1002/app.1994.070541010 ↗
58. Vyazovkin S, Mititelu A, Sbirrazzuoli N (2003) Kinetics of epoxy-amine curing accompanied by the formation of liquid crystalline structure. Macromol Rapid Commun 24(18):1060–106510.1002/marc.200300023 ↗
59. Starink M (2003) The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochim Acta 404(1–2):163–17610.1016/S0040-6031(03)00144-8 ↗
60. Perrin F-X, Nguyen TMH, Vernet J-L (2007) Kinetic analysis of isothermal and nonisothermal epoxy-amine cures by model-free isoconversional methods. Macromol Chem Phys 208(7):718–72910.1002/macp.200600614 ↗