New small molecule gel electrolyte with high ionic conductivity for Li–S batteries
Source abstract
Abstract
A new small molecule gel electrolyte is developed by trapping an organic mixture of 1,3-dioxolane and dimethyl ether with lithium bistrifluoromethanesulfonimide (LiTFSI). The electrochemical properties of the resulting gel electrolyte are investigated. AC impedance spectroscopy reveals that the ionic conductivity of the as-prepared gel electrolyte containing 8.3 wt% small molecules displays a maximum value of 6.43 × 10−3 S cm−1 at room temperature. The possible interaction between molecule and LiTFSI was investigated by the NMR spectra and a speculated transmission mechanism was also discussed. The sulfur cathode with the as-prepared small molecule gel electrolyte displays the initial discharge specific capacity of 1008 mAh g−1 (0.1 C). The Li–S cells assembled with the as-prepared electrolyte membrane display an excellent cycle performance and coulombic efficiency. The electrolyte membrane played an important role in restraining the shuttle effect of polysulfides. These experimental results demonstrate the possibility and potential as new solid electrolyte for Li–S batteries to replace the traditional polymer gel electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Bruce PG, Freunberger SA, Hardwick LJ, Tarascon JM (2012) Li–O2 and Li–S batteries with high energy storage. Nat Mater 11:19–2910.1038/nmat3191 ↗
2. Goodenough JB, Park KS (2013) The Li-ion rechargeable battery: a perspective. J Am Chem Soc 135:1167–117610.1021/ja3091438 ↗
3. Yin YX, Xin S, Guo YG, Wan LJ (2013) Lithium–sulfur batteries: electrochemistry, materials, and prospects. Angew Chem Int Chem 52:13186–1320010.1002/anie.201304762 ↗
4. Barghamadi M, Kapoor A, Wen C (2013) A review on Li–S batteries as a high efficiency rechargeable lithium battery. J Electrochem Soc 160:1256–126310.1149/2.096308jes ↗
5. Kraytsberg A, Ein-Eli Y (2011) Review on Li–air batteries-opportunities, limitations and perspective. J Power Sources 196:886–89310.1016/j.jpowsour.2010.09.031 ↗
6. Zhang YG, Zhao Y, Bakenov Z, Gosselink D, Chen P (2014) Poly(vinylidene fluoride-co- hexafluoropropylene)/poly(methylmethacrylate)/nanoclay composite gel polymer electrolyte for lithium/sulfur batteries. J Solid State Electrochem 18:1111–111610.1007/s10008-013-2366-y ↗
7. Xu GY, Ding B, Pan J, Nie P, Shen LF, Zhang XG (2014) High performance lithium-sulfur batteries: advances and challenges. J Mater Chem A 2:12662–1267610.1039/C4TA02097A ↗
8. Chen L, Shaw LL (2014) Recent advances in lithium–sulfur batteries. J Power Sources 267:770–78310.1016/j.jpowsour.2014.05.111 ↗
9. Quartarone E, Mustarelli P (2011) Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. Chem Soc Rev 40:2525–254010.1039/c0cs00081g ↗
10. Wu BR, Liu Q, Mu DB, Ren YH, Li Y, Wang L, Xu HL, Wu F (2014) New desolvated gel electrolyte for rechargeable lithium metal sulfurized polyacrylonitrile (S-PAN) battery. J Phys Chem C 118:28369–2837610.1021/jp507723n ↗
11. Zhao Y, Zhang YG, Gosselink D, Doan TN, Sadhu M, Cheang HJ, Chen P (2012) Gas separation using inorganic membranes. Membranes 2:553–56410.3390/membranes2030553 ↗
12. Fenton DE, Parker JM, Wright PV (1973) Pressure dependence of β and γ dispersion for polyethylene by n.m.r. Polymer 14:589–59010.1016/0032-3861(73)90146-8 ↗
13. Fergus JW (2010) Ceramic and polymeric solid electrolytes for lithium-ion batteries. J Power Sources 195:4554–456910.1016/j.jpowsour.2010.01.076 ↗
14. Varshney PK, Gupta S (2011) Natural polymer-based electrolytes for electro-chemical devices: a review. Ionics 17:479–48310.1007/s11581-011-0563-1 ↗
15. Shalu SK, Chaurasia RK, Singh Chandra S (2013) Thermal stability, complexing behavior, and ionic transport of polymeric gel membranes based on polymer PVdF-HFP and ionic liquid, [BMIM][BF4]. J Phys Chem B 117:897–90610.1021/jp307694q ↗
16. Huang LY, Shih YC, Wang SH, Kuo PL, Teng H (2014) Gel electrolytes based on an ether-abundant polymeric framework for high-rate and long-cycle-life lithium ion batteries. J Mater Chem A 2:10492–1050110.1039/c4ta01527d ↗
17. Ileperuma OA (2013) Gel polymer electrolytes for dye sensitised solar cells: a review. Mater Technol 28:65–7010.1179/1753555712Y.0000000043 ↗
18. Yang PT, Zhang P, Shi C, Chen LX, Dai JH, Zhao JB (2015) The functional separator coated with core-shell structured silica-poly(methyl methacrylate) sub-microspheres for lithium-ion batteries. J Membrane Sci 474:148–15510.1016/j.memsci.2014.09.047 ↗
19. Costa CM, Gomez Ribelles JL, Lanceros-Méndez S, Appetecchi GB, Scrosati B (2014) Poly(vinylidene fluoride)-based, co-polymer separator electrolyte membranes for lithium-ion battery systems. J Power Sources 245:779–78610.1016/j.jpowsour.2013.06.151 ↗
20. Lu QW, Fang JH, Yang J, Miao RR, Wang JL, Nuli YN (2014) Novel cross-linked copolymer gel electrolyte supported by hydrophilic polytetrafluoroethylene for rechargeable lithium batteries. J Membrane Sci 449:176–18310.1016/j.memsci.2013.08.029 ↗
21. Sownthari K, Austin Suthanthiraraj S (2014) Preparation and properties of a gel polymer electrolyte system based on poly-ε-caprolactone containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. J Phys Chem Solids 75:746–75110.1016/j.jpcs.2014.02.003 ↗
22. Lee H, Yanilmaz M, Toprakci O, Fu K, Zhang X (2014) A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy Environ Sci 7:3857–388610.1039/C4EE01432D ↗
23. Yim T, Park MS, Yu JS, Kim KJ, Im KY, Kim JH, Jeong G, Jo YN, Woo SG, Kang KS, Lee I, Kim YJ (2013) Effect of chemical reactivity of polysulfide toward carbonate-based electrolyte on the electrochemical performance of Li–S batteries. Electrochim Acta 107:454–46010.1016/j.electacta.2013.06.039 ↗
24. Jeddi K, Zhao Y, Zhang YG, Konarov A, Chen P (2013) Fabrication and characterization of an effective polymer nanocomposite electrolyte membrane for high performance lithium/sulfur batteries. J Electrochem Soc 160:1052–106010.1149/2.010308jes ↗
25. Scrosati B, Garche J (2010) Lithium batteries: status, prospects and future. J Power Sources 195:2419–243010.1016/j.jpowsour.2009.11.048 ↗
26. Zaghib K, Charest P, Guerfi A, Shim J, Perrier M, Striebel K (2004) Safe Li-ion polymer batteries for HEV applications. J Power Sources 134:124–12910.1016/j.jpowsour.2004.02.020 ↗
27. Feringa BL, Esch JH, Schoonbeek F, Loosde M, Kooijman H, Spek AL, Kellogg RM (1999) Cyclic bis-Urea compounds as gelators for organic solvents. Chem Eur J 5:937–95010.1002/(SICI)1521-3765(19990301)5:3<937::AID-CHEM937>3.0.CO;2-0 ↗
28. Wang QS, Wen ZY, Jin J, Guo J, Huang X, Yang JH, Chen CH (2016) A gel-ceramic multi-layer electrolyte for long-life lithium sulfur batteries. Chem Commun 52:1637–164010.1039/C5CC08279J ↗
29. Kim KM, Park NG, Ryu KS, Chang SH (2006) Characteristics of PVdF-HFP/TiO2 composite membrane electrolytes prepared by phase inversion and conventional casting methods. Electrochim Acta 51:5636–564410.1016/j.electacta.2006.02.038 ↗
30. Qian XM, Gu NY, Cheng ZL, Yang XR, Wang EK, Dong SJ (2001) Impedance study of (PEO)10LiClO4–Al2O3 composite polymer electrolyte with blocking electrodes. Electrochim Acta 46:1829–183610.1016/S0013-4686(00)00723-4 ↗
31. Bandeira EMC, Franco VC, Martini E (1999) Electrochemical impedance spectroscopy of poly{pyrrole-trans-[(RuCl2(pmp)4]} copolymer films deposited on platinum electrodes. J Solid State Electr 3:210–21410.1007/s100080050149 ↗
32. Appetecchi GB, Romagnoli P, Scrosati B (2001) Composite gel membranes: a new class of improved polymer electrolytes for lithium batteries. Electrochem Commun 3:281–28410.1016/S1388-2481(01)00137-0 ↗
33. Appetecchi GB, Croce F, Scrosati B (1995) Kinetics and stability of the lithium electrode in poly(methylmethacrylate)-based gel electrolytes. Electrochim Acta 40:991–99710.1016/0013-4686(94)00345-2 ↗
34. Appetecchi GB, Alessandrini F, Passerini S, Caporiccio G, Boutevin B, Guida- PietraSanta F (2005) Novel polymeric systems for lithium ion batteries gel electrolytes: II. Hybrid cross-linked poly(fluorosilicone-ethyleneoxide). Electrochim Acta 50:4396–440410.1016/j.electacta.2005.02.003 ↗
35. Hema M, Selvasekarapandian S, Arunkumar D, Sakunthala A, Nithya H (2009) FTIR, XRD and AC impedance spectroscopic study on PVA based polymer electrolyte doped with NH4X (X = Cl, Br, I). J Non-Cryst Solids 355:84–9010.1016/j.jnoncrysol.2008.10.009 ↗
36. Osman Z, Mohd Ghazali MI, Othman L, Md Isa KB (2012) AC ionic conductivity and DC polarization method of lithium ion transport in PMMA-LiBF4 gel polymer electrolytes. Results Phys 2:1–410.1016/j.rinp.2011.12.001 ↗
37. Choe HS, Carroll BG, Pasquariello DM, Abraham KM (1998) Characterization of some polyacrylonitrile-based electrolytes. Chem Mater 9:369–37910.1021/cm9604120 ↗
38. Appetecchi GB, Scrosati B (1998) A lithium ion polymer battery. Electrochim Acta 43:1105–110710.1016/S0013-4686(97)10117-7 ↗
39. Choi BK, Kim YW, Shin KH (1997) Effects of ceramic fillers on the electrical properties of (PEO)16LiClO4 electrolytes. J Power Sources 68:357–36010.1016/S0378-7753(97)02638-4 ↗
40. Zhu SY, Yu JJ, Yan X, Zhao EQ, Wang YQ, Sun DY, Jin YC, Kanamura K (2016) Enhanced electrochemical performance from cross-linked polymeric network as binder for Li–S battery cathodes. J Appl Electrochem 46:725–73310.1007/s10800-016-0957-x ↗
41. Jin LM, He F, Cai WL, Huang JX, Liu BH, Li ZP (2016) Preparation, characterization and application of modified macroporous carbon with Co-N site for long-life lithium-sulfur battery. J Power Sources 328:536–54210.1016/j.jpowsour.2016.08.060 ↗