Diverse effects of microwave heating on anatase crystallization in ionothermal synthesis of nanostructured TiO2
Source abstract
Abstract
This article examines anatase crystallization in the ionothermal synthesis [sol gel method in the presence of ionic liquid (IL)] of nanostructured TiO2 under microwave (MW) irradiation. MW heating can lead to rapid temperature increase of chemical reactions. In this study, we found that rapid temperature increasing effects on anatase crystallization were diverse and dependent on initial water concentration, MW irradiation time, and IL concentration. The results indicated that higher anatase crystallinity was obtained at high water amount irrespective of IL concentration. However, at lower water amounts, higher anatase crystallinity occurred only when MW heating was applied after the mixtures reacted for certain duration, especially at lower initial temperature and at a specific IL concentration. Different MW heating effects on the hydrolysis–condensation reaction and the post-treatment stage under MW/IL conditions can explain this diversity. Heating characteristics of IL/water mixtures under MW irradiation were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Leadbeater NE, Torenius HM, Tye H (2004) Comb Chem High Throughput Screen 7:51110.2174/1386207043328562 ↗
2. Bilecka I, Niederberger M (2010) Nanoscale 2:135810.1039/b9nr00377k ↗
3. Harta JN, Cervinia R, Chenga YB, Simona GP, Spiccia L (2004) Sol Energ Mat Sol C 84:13510.1016/j.solmat.2004.02.041 ↗
4. Periyat P, Leyland ND, McCormack E, Colreavy J, Corrc D, Pillai SC (2010) J Mater Chem 20:365010.1039/b924341k ↗
5. Komarneni S, Rajha RK, Katsuki H (1999) Mater Chem Phys 61:5010.1016/S0254-0584(99)00113-3 ↗
6. Ma Z, Yu J, Dai S (2010) Adv Mater 22:26110.1002/adma.200900603 ↗
7. Yoo K, Choi H, Dionysiou DD (2004) Chem Commun 200010.1039/b406040g ↗
8. Taubert A (2005) Acta Chim Slov 52:183
9. Antonietti M, Kuang D, Smarsly B, Zhou Y (2004) Angew Chem Int Ed 43:498810.1002/anie.200460091 ↗
10. Zhou Y (2005) Curr Nanosci 1:3510.2174/1573413052953174 ↗
11. Taubert A, Li Z (2007) Dalton Trans 7:72310.1039/B616593A ↗
12. Li Z, Jia Z, Luan Y, Mud T (2008) Curr Opin Solid State Mater Sci 12:110.1016/j.cossms.2009.01.002 ↗
13. Hoffmann J, Nüchter M, Ondruschk B, Wasserscheid P (2003) Green Chem 5:29610.1039/B212533A ↗
14. Martínez-Palou R (2010) Mol Divers 14:310.1007/s11030-009-9159-3 ↗
15. Morris RE (2008) Angew Chem Int Ed 47:44210.1002/anie.200704888 ↗
16. Ding K, Miao Z, Liu Z, Zhang Z, Han B, An G, Miao S, Xie Y (2007) J Am Chem Soc 129:636210.1021/ja070809c ↗
17. Dong W, Li M, Liu C, Lin F, Liu Z (2008) J Colloid Interface Sci 319:11510.1016/j.jcis.2007.08.031 ↗
18. Liu YH, Chang MC, Shao H, Huang MS, Yang AC (2010) J Mater Sci 45:369. doi: 10.1007/s10853-009-3945-210.1007/s10853-009-3945-2 ↗
19. Dallinger D, Kappe CO (2007) Chem Rev 107:256310.1021/cr0509410 ↗
20. Liu W, Zhao T, Zhang Y, Wang H, Yu M (2006) J Solut Chem 35:133710.1007/s10953-006-9064-7 ↗
21. Vila J, Gines P, Rilo E, Cabeza O, Varela LM (2006) Fluid Phase Equilib 247:3210.1016/j.fluid.2006.05.028 ↗
22. Jarosik A, Krajewski SR, Lewandowski A, Radzimski P (2006) J Mol Liq 123:4310.1016/j.molliq.2005.06.001 ↗
23. Yu J, Wang G, Chemg B, Zhou M (2007) Appl Catal B Environ 69:17110.1016/j.apcatb.2006.06.022 ↗
24. Pouilleau J, Devilliers D, Groult H (1997) J Mater Res 32:5645
25. Liu YH, Lin CW, Chang MC, Shao H, Yang ACM (2008) J Mater Sci 43:5005. doi: 10.1007/s10853-008-2740-910.1007/s10853-008-2740-9 ↗