Underwater discharge plasma-induced coating of poly(acrylic acid) on polypropylene fiber
Source abstract
Abstract
An underwater diaphragm discharge generated at atmospheric pressure by high voltage pulses was used for plasma polymerization of acrylic acid and simultaneously for the deposition of polymer coating on polypropylene multifilament fibers. The deposition process was monitored by Fourier transform infrared spectroscopy in combination with scanning electron microscopy. Possible schemes of polymerization are suggested also.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Plasma Applications and Diagnostics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Inagaki N (1996) Plasma surface modification and plasma polymerization. Tecnomic Publishing, Lancaster
2. Poncin-Epaillard F, Chevet B, Brosse JC (1994) Modification of isotactic polypropylene by a cold plasma or an electron beam and grafting of the acrylic acid onto these activated polymers. J Appl Polym Sci 53:1291–130610.1002/app.1994.070531003 ↗
3. Sellin N, Sinezio J, Campos C (2003) Surface composition analysis of PP films treated by corona discharge. Mater Res 6:163–16610.1590/S1516-14392003000200009 ↗
4. Dogue ILJ, Mermilliod N, Boiron G, Staveris S (1995) Improvement of polypropylene film adhesion in multilayers by various chemical surface modifications. Int J Adhes Adhes 15:205–21010.1016/0143-7496(96)83700-6 ↗
5. Dogue ILJ, Forch R, Mermilliod N (1995) Grafting of acrylic acid onto polypropylene—comparison of two pretreatments: γ-irradiation and argon plasma. Nucl Instr Methods Phys Res B 105:164–16710.1016/0168-583X(95)00543-9 ↗
6. Winnik FM, Morneau A, Mika AM, Childs RF, Roig A, Molins E (1998) Polyacrylic acid pore-filled microporous membranes and their use in membrane-mediated synthesis of nanocrystalline ferrihydrite. Can J Chem 76:10–1710.1139/v97-210 ↗
7. Gao JZ (2006) A novel technique for wasterwater treatment by contact glow discharge electrolysis. Pak J Biol Sci 9:323–32910.3923/pjbs.2006.323.329 ↗
8. Khlustova AV, Maximov AI, Subbotkina IN (2010) The electrical discharge action on the wastewater for cleaning. High Temp Mater Proc 14:185–19110.1615/HighTempMatProc.v14.i1-2.160 ↗
9. Dors M, Metel E, Mizeraczyk J (2007) Phenol degradation in water by pulsed streamer corona discharge and Fenton reaction. Int J Plasma Environ Sci Technol 1:76–81
10. Lu QF, Yu J, Gao JZ (2006) Degradation of 2,4-dichlorophenol by using glow discharge electrolysis. J Hazard Mater 136:526–53110.1016/j.jhazmat.2005.11.001 ↗
11. Joshi R, Schulze RD, Meyer-Plath A, Friedrich JF (2008) Selective surface modification of poly(propylene) with OH and COOH groups using liquid-plasma systems. Plasma Process Polym 5:695–70710.1002/ppap.200700175 ↗
12. Maximov A (2007) Physics, chemistry and application of the AC diaphragm discharge and related discharges in electrolyte solutions. Contrib Plasma Phys 47:111–11810.1002/ctpp.200710016 ↗
13. Teslenko VS, Drozhzhin AP, Sankin GN (2006) The autocyclic ring breakdown in electrolyte with induced collapse of bubbles. Lett J Technol Phys 32:24–31 (in Russian)
14. Khlyustova AV, Manakhov AM, Maksimov AI (2009) A scenario of development of low-voltage “underwater” discharge. Surf Eng Appl Electrochem 45:485–48810.3103/S1068375509060088 ↗
15. Nikiforov AY, Leys C (2007) Influence of capillary geometry and applied voltage on hydrogen peroxide and OH radical formation in AC underwater electrical discharges. Plasma Sources Sci Technol 16:273–28010.1088/0963-0252/16/2/009 ↗
16. Yang P, Deng JY, Tai YW (2003) Confined photo-catalytic oxidation: a fast surface hydrophilic modification method for polymeric materials. Polymer 44:7157–716410.1016/j.polymer.2003.09.010 ↗
17. Malik MA, Ahmed M, Rehman E, Naheed R, Ghaffar A (2003) Synthesis of superabsorbent copolymers by pulsed corona discharges in water. Plasma Polym 8:271–27910.1023/A:1026385110522 ↗
18. Siaratta V, Vohrer U, Hegemann D, Muller M, Oehr C (2003) Plasma functionalization of polypropylene with acrylic acid. Surf Coat Technol 174–175:805–81010.1016/S0257-8972(03)00564-4 ↗
19. Morent R, De Geyter N, Leys C, Gengembre L, Payen E (2008) Comparison between XPS- and FTIR-analysis of plasma-treated polypropylene film surfaces. Surf Interface Anal 40:597–60010.1002/sia.2619 ↗
20. Kirwan LJ, Fawell PD, van Brounswijk W (2003) In situ FTIR-ATR examination of poly(acrylic acid) adsorbed onto hematite at low pH. Langmuir 19:5802–580710.1021/la027012d ↗
21. Choi HS, Kim YS, Zhang Y, Tang S, Myung SW, Shin BS (2004) Plasma-induced graft co-polymerization of acrylic acid onto polyurethane surface. Surf Coat Technol 182:55–6410.1016/S0257-8972(03)00880-6 ↗
22. Gornukhina OV, Shikova TG, Ageeva TA, Titov VA, Golubchikov OA (2008) Post-plasma graft co-polymerization of polypropylene and acrylic acid. Chem Chem Technol 51:75–79 (in Russian)
23. Alavi MHS, Habibi M, Amrollahi R, Afshar Taromi F (2011) A study of plasma polymerization of acrylic acid using APF plasma focus device. J Fusion Energy 30:184–18910.1007/s10894-010-9370-3 ↗
24. Golubchikov OA, Gornukhina OV, Vershinina IA, Ageeva TA, Titov VA (2007) The polypropylene materials of medical purpose modificated by acetylsalicylic acid. Chem Chem Technol 50:65–68 (in Russian)