Residual stress measurement on Titanium Grade 5 and Inconel 625 thin dissimilar welded joints by contour method
Source abstract
Abstract
Residual stress assessment is a key factor in engineering design owing to its impact on engineering properties of materials, structural components and welded joints. In dissimilar welding, residual stresses arise due to both the welding process itself and the different coefficients of thermal expansion of the two welded materials. The longitudinal residual stresses in 2-mm-thick laser-welded Ti–6Al–4V and Inconel 625 plates with two intermediate inserts of Vanadium and steel were determined using the contour method and the X-ray diffraction. For all the specimens analyzed, the contour method stress maps revealed that the highest tensile residual stress zone occurred in the steel insert, while compression was found in the base metals. Moreover, harmful surface tensile stresses arose at the welds between steel and Vanadium. Lastly, among the three welding schemes examined, the dissimilar joint realized with the AISI 316L insert exhibited the lowest harmful surface tensile residual stresses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Kudryavtsev YF (2008) Residual Stress BT - Springer Handbook of Experimental Solid Mechanics. In: Sharpe WN (ed) Springer. US, Boston, MA, pp 371–388
2. Rossini NS, Dassisti M, Benyounis KY, Olabi AG (2012) Methods of measuring residual stresses in components. Mater Des 35:572–588. https://doi.org/10.1016/j.matdes.2011.08.02210.1016/j.matdes.2011.08.022 ↗
3. Withers PJ, Bhadeshia HKDH (2001) Residual stress. Part 2–Nature and origins. Mater Sci Technol 17:366–375. https://doi.org/10.1179/02670830110151008710.1179/026708301101510087 ↗
4. Casavola C, Nobile R, Pappalettere C (2005) A local strain method for the evaluation of welded joints fatigue resistance: The case of thin main-plates thickness. Fatigue Fract Eng Mater Struct 28:759–767. https://doi.org/10.1111/j.1460-2695.2005.00909.x10.1111/j.1460-2695.2005.00909.x ↗
5. Barile C, Casavola C, Pappalettera G, Pappalettere C (2014) Remarks on residual stress measurement by hole-drilling and electronic speckle pattern interferometry. Sci World J. https://doi.org/10.1155/2014/48714910.1155/2014/487149 ↗
6. Casavola C, Barile C, Moramarco V, Pappalettera G (2020) Introductory Chapter: New Challenges in Residual Stress Measurements and Evaluation. In: New Challenges in Residual Stress Measurements and Evaluation. pp 1–410.5772/intechopen.92620 ↗
7. Schajer GS, Ruud CO (2013) Overview of residual stresses and their measurement. In: Practical Residual Stress Measurement Methods. pp 1–2710.1002/9781118402832.ch1 ↗
8. Prime MB (2001) Cross-sectional mapping of residual stresses by measuring the surface contour after a cut. J Eng Mater Technol Trans ASME 123:162–168. https://doi.org/10.1115/1.134552610.1115/1.1345526 ↗
9. Bueckner HF (1958) The propagation of cracks and the energy of elastic deformation. Trans ASME 1225–123010.1115/1.4012657 ↗
10. Prime MB, Sebring RJ, Edwards JM et al (2004) Laser surface-contouring and spline data-smoothing for residual stress measurement. Exp Mech 44:176–184. https://doi.org/10.1007/BF0242817710.1007/BF02428177 ↗
11. Prime MB, DeWald AT (2013) The contour method. In: Practical Residual Stress Measurement Methods. pp 109–13810.1002/9781118402832.ch5 ↗
12. Hosseinzadeh F, Kowal J, Bouchard PJ (2014) Towards good practice guidelines for the contour method of residual stress measurement. J Eng 2014:453–468. https://doi.org/10.1049/joe.2014.013410.1049/joe.2014.0134 ↗
13. Prime MB, Kastengren AL (2011) The contour method cutting assumption: error minimization and correction. In: Experimental and Applied Mechanics. Springer, pp 233–25010.1007/978-1-4419-9792-0_40 ↗
14. Ahmad B, Fitzpatrick ME (2016) Minimization and mitigation of wire EDM cutting errors in the application of the contour method of residual stress measurement. Metall Mater Trans A 47:301–313. https://doi.org/10.1007/s11661-015-3231-710.1007/s11661-015-3231-7 ↗
15. Hosseinzadeh F, Ledgard P, Bouchard PJ (2013) Controlling the cut in contour residual stress measurements of electron beam welded Ti-6Al-4V alloy plates. Exp Mech 53:829–839. https://doi.org/10.1007/s11340-012-9686-110.1007/s11340-012-9686-1 ↗
16. Sun YL, Roy MJ, Vasileiou AN et al (2017) Evaluation of errors associated with cutting-induced plasticity in residual stress measurements using the contour method. Exp Mech 57:719–734. https://doi.org/10.1007/s11340-017-0255-510.1007/s11340-017-0255-5 ↗
17. Traore Y, Bouchard PJ, Francis J, Hosseinzadeh F (2011) A novel cutting strategy for reducing plasticity induced errors in residual stress measurements made with the contour method. In: Pressure Vessels and Piping Conference. pp 1201–121210.1115/PVP2011-57509 ↗
18. Hosseinzadeh F, Traore Y, Bouchard PJ, Muránsky O (2016) Mitigating cutting-induced plasticity in the contour method, part 1: experimental. Int J Solids Struct 94:247–253. https://doi.org/10.1016/j.ijsolstr.2015.12.03410.1016/j.ijsolstr.2015.12.034 ↗
19. Traoré Y, Hosseinzadeh F, Bouchard PJ (2014) Plasticity in the contour method of residual stress measurement. In: Advanced Materials Research. pp 337–34210.4028/www.scientific.net/AMR.996.337 ↗
20. Toparli MB, Fitzpatrick ME, Gungor S (2013) Improvement of the contour method for measurement of near-surface residual stresses from laser peening. Exp Mech 53:1705–1718. https://doi.org/10.1007/s11340-013-9766-x10.1007/s11340-013-9766-x ↗
21. Johnson G (2008) Residual stress measurements using the contour method. PhD Dissertation, University of Manchester (United Kingdom)
22. Olson MD, DeWald AT, Prime MB, Hill MR (2015) Estimation of uncertainty for contour method residual stress measurements. Exp Mech 55:577–585. https://doi.org/10.1007/s11340-014-9971-210.1007/s11340-014-9971-2 ↗
23. Toparli MB, Fitzpatrick ME (2016) Development and application of the contour method to determine the residual stresses in thin laser-peened aluminium alloy plates. Exp Mech 56:323–330. https://doi.org/10.1007/s11340-015-0100-710.1007/s11340-015-0100-7 ↗
24. Shi L, Price AH, Hung WN (2018) Use of contour method for welding residual stress assessment. Procedia Manuf 26:276–285. https://doi.org/10.1016/j.promfg.2018.07.03610.1016/j.promfg.2018.07.036 ↗
25. Kelleher J, Prime MB, Buttle D et al (2003) The Measurement of Residual Stress in Railway Rails by Diffraction and other Methods. J Neutron Res 11:187–193. https://doi.org/10.1080/1023816041000172660210.1080/10238160410001726602 ↗
26. Zhang Y, Ganguly S, Edwards L, Fitzpatrick ME (2004) Cross-sectional mapping of residual stresses in a VPPA weld using the contour method. Acta Mater 52:5225–5232. https://doi.org/10.1016/j.actamat.2004.07.04510.1016/j.actamat.2004.07.045 ↗
27. Liu C, Yi X (2013) Residual stress measurement on AA6061-T6 aluminum alloy friction stir butt welds using contour method. Mater Des 46:366–371. https://doi.org/10.1016/j.matdes.2012.10.03010.1016/j.matdes.2012.10.030 ↗
28. D’Elia CR, Hill MR, Stender ME, San Marchi CW (2020) Residual Stresses at Critical Locations in Additively-Manufactured Components. In: Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems. Springer, pp 49–5710.1007/978-3-030-30098-2_8 ↗
29. Casalino G, Angelastro A, Perulli P et al (2018) Study on the fiber laser/TIG weldability of AISI 304 and AISI 410 dissimilar weld. J Manuf Process 35:216–225. https://doi.org/10.1016/j.jmapro.2018.08.00510.1016/j.jmapro.2018.08.005 ↗
30. Prime MB, Gnäupel-Herold T, Baumann JA et al (2006) Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld. Acta Mater 54:4013–4021. https://doi.org/10.1016/j.actamat.2006.04.03410.1016/j.actamat.2006.04.034 ↗
31. Jafari H, Mansouri H, Honarpisheh M (2019) Investigation of residual stress distribution of dissimilar Al-7075-T6 and Al-6061-T6 in the friction stir welding process strengthened with SiO2 nanoparticles. J Manuf Process 43:145–153. https://doi.org/10.1016/j.jmapro.2019.05.02310.1016/j.jmapro.2019.05.023 ↗
32. Xie P, Zhao H, Liu Y (2016) Measuring residual stresses in linear friction welded joints composed by dissimilar titanium. Sci Technol Weld Join 21:351–357. https://doi.org/10.1080/13621718.2015.111515810.1080/13621718.2015.1115158 ↗
33. Zhang C, Shirzadi AA (2018) Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method. Sci Technol Weld Join 23:394–399. https://doi.org/10.1080/13621718.2017.140284610.1080/13621718.2017.1402846 ↗
34. Chen HC, Pinkerton AJ, Li L (2011) Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications. Int J Adv Manuf Technol 52:977–987. https://doi.org/10.1007/s00170-010-2791-310.1007/s00170-010-2791-3 ↗
35. Auwal ST, Ramesh S, Yusof F, Manladan SM (2018) A review on laser beam welding of titanium alloys. Int J Adv Manuf Technol 97:1071–1098. https://doi.org/10.1007/s00170-018-2030-x10.1007/s00170-018-2030-x ↗
36. Quazi MM, Ishak M, Fazal MA et al (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Opt Laser Technol. https://doi.org/10.1016/j.optlastec.2020.10609010.1016/j.optlastec.2020.106090 ↗
37. Gorthi SS, Rastogi P (2010) Fringe projection techniques: Whither we are? Opt Lasers Eng 48:133–140. https://doi.org/10.1016/j.optlaseng.2009.09.00110.1016/j.optlaseng.2009.09.001 ↗
38. Wang Z, Nguyen DA, Barnes JC (2010) Some practical considerations in fringe projection profilometry. Opt Lasers Eng 48:218–225. https://doi.org/10.1016/j.optlaseng.2009.06.00510.1016/j.optlaseng.2009.06.005 ↗
39. (1990) Metals Handbook, Vol.1 - Properties and Selection: Irons, Steels, and High-Performance Alloys. ASM International
40. (1990) Metals Handbook, Vol.2 - Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International
41. DeWald AT, Hill MR (2006) Multi-Axial Contour Method for Mapping Residual Stresses in Continuously Processed Bodies. Exp Mech 46:473–490. https://doi.org/10.1007/s11340-006-8446-510.1007/s11340-006-8446-5 ↗
42. Besl PJ, McKay ND (1992) A Method for Registration of 3-D Shapes. IEEE Trans Pattern Anal Mach Intell 14:239–256. https://doi.org/10.1109/34.12179110.1109/34.121791 ↗
43. European Commitee for Standardization (2008) EN 15305:2008 E, Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction
44. Pagliaro P, Prime MB, Robinson JS et al (2011) Measuring Inaccessible Residual Stresses Using Multiple Methods and Superposition. Exp Mech 51:1123–1134. https://doi.org/10.1007/s11340-010-9424-510.1007/s11340-010-9424-5 ↗
45. Kalpakjian S (2001) Manufacturing Engineering & Technology. Pearson Education India
46. Dawes CT (1992) Laser Welding. Woodhead Publishing, A practical guide10.1533/9781845698843 ↗
47. Joseph A, Rai SK, Jayakumar T, Murugan N (2005) Evaluation of residual stresses in dissimilar weld joints. Int J Press Vessel Pip 82:700–705. https://doi.org/10.1016/j.ijpvp.2005.03.00610.1016/j.ijpvp.2005.03.006 ↗
48. Jenney CL, Brien AO (2001) Welding Handbook, 9th edn. Woodhead Publishing
49. Lee CH, Chang KH (2007) Numerical analysis of residual stresses in welds of similar or dissimilar steel weldments under superimposed tensile loads. Comput Mater Sci 40:548–556. https://doi.org/10.1016/j.commatsci.2007.02.00510.1016/j.commatsci.2007.02.005 ↗
50. Totten G, Howes M, Inoue T (2002) Handbook of residual stress and deformation of steel. ASM International