journal article·2020-08

A novel SiO2 nanofiber-supported organic–inorganic gel polymer electrolyte for dendrite-free lithium metal batteries

Haiyang Liao, Han Chen, Fenglin Zhou, Zhanzhan Zhang

Journal of Materials Science· Volume 55· Issue 22
Publisher page

Abstract

The ever-growing dendrite lithium is a hazardous behavior for lithium metal batteries due to triggering safety issues. Gel-based polymer electrolyte, which possesses high ionic conductivity, chemical stability, and high-level safety, has a great potential to substitute traditional liquid electrolyte to avoid electrolyte leakage, electrolyte decomposition, and interface issues. In this work, precursor solution which consists of polyethylene glycol 2000, isocyanate-ended tri-hydroxyl polyether polyols, and LiPF6 is in situ polymerized in SiO2 nanofiber membrane to prepare SiO2 nanofiber-supported organic–inorganic gel polymer electrolyte. In this polymer electrolyte, the inorganic SiO2 nanofiber framework is endued with good mechanical properties for polymer electrolyte, while the ether-rich polymer chains have superior compatibility with electrolyte, acting as ionic transportation network. The synergistic effect between organic and inorganic part induces uniform lithium deposition, thus resulting in remarkable lithium dendrite resistance and electrochemical performances including ionic conductivity, interfacial resistance, charge/discharge capacities, rate behavior, and long-term cyclic life span.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Armand M, Tarascon JM (2008) Building better batteries. Nature 451:652–65710.1038/451652a ↗
2. Quartarone E, Mustarelli P (2011) Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. Chem Soc Rev 40:2525–254010.1039/c0cs00081g ↗
3. Choi NS, Chen Z, Freunberger SA, Ji X, Sun YK, Amine K, Nazar LF, Cho J, Bruce PG (2012) Challenges facing lithium batteries and electrical double-layer capacitors. Angew Chem Int Ed Engl 51:9994–1002410.1002/anie.201201429 ↗
4. Bai P, Li J, Brushett FR, Bazant MZ (2016) Transition of lithium growth mechanisms in liquid electrolytes. Energy Environ Sci 9:3221–322910.1039/C6EE01674J ↗
5. Yang F, Xie YY, Deng YL, Yuan C (2018) Predictive modeling of battery degradation and greenhouse gas emissions from US state-level electric vehicle operation. Nat. Commun. 9(2018):2429–243810.1038/s41467-018-04826-0 ↗
6. Zeng XX, Yin YX, Li NW, Du WC, Guo YG, Wan LJ (2016) Reshaping lithium plating/stripping behavior via bifunctional polymer electrolyte for room-temperature solid Li metal batteries. J Am Chem Soc 138:15825–1582810.1021/jacs.6b10088 ↗
7. Lin D, Liu Y, Cui Y (2017) Reviving the lithium metal anode for high-energy batteries. Nat Nanotechnol 12:194–20610.1038/nnano.2017.16 ↗
8. Xia M, Zhou Z, Su Y, Li Y, Wu Y, Zhou N, Zhang H, Xiong X (2018) Scalable synthesis SiO@C anode by fluidization thermal chemical vapor deposition in fluidized bed reactor for high-energy lithium-ion battery. Appl Surf Sci 467:298–308
9. Liu K, Liu Y, Lin D, Pei A, Cui Y (2018) Materials for lithium-ion battery safety. Sci. Adv. 4:982010.1126/sciadv.aas9820 ↗
10. Balakrishnan PG, Ramesh R, Prem Kumar T (2006) Safety mechanisms in lithium-ion batteries. J Power Sources 155:401–41410.1016/j.jpowsour.2005.12.002 ↗
11. Goodenough JB, Kim Y (2009) Challenges for rechargeable Li batteries. Chem Mater 22:587–60310.1021/cm901452z ↗
12. Jung J-W, Lee C-L, Yu S, Kim I-D (2016) Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review. J. Mater. Chem. A 4:703–75010.1039/C5TA06844D ↗
13. Khurana R, Schaefer JL, Archer LA, Coates GW (2014) Suppression of lithium dendrite growth using cross-linked polyethylene/poly (ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries. J Am Chem Soc 136:7395–740210.1021/ja502133j ↗
14. Wang Q, Yang S, Miao J, Zhang Y, Zhang D, Chen Y, Li Z (2018) Synthesis of graphene supported Li2SiO3/Li2SnO3 anode material for rechargeable lithium ion batteries. Appl Surf Sci 469:253–26110.1016/j.apsusc.2018.11.055 ↗
15. Chai J, Liu Z, Ma J, Wang J, Liu X, Liu H, Zhang J, Cui G, Chen L (2017) In-situ generation of poly (vinylene carbonate) based solid electrolyte with interfacial stability for LiCoO2 lithium batteries. Adv. Sci. 4:160037710.1002/advs.201600377 ↗
16. Lu Q, Fang J, Yang J, Yan G, Liu S, Wang J (2013) A novel solid composite polymer electrolyte based on poly (ethylene oxide) segmented polysulfone copolymers for rechargeable lithium batteries. J Membr Sci 425:105–11210.1016/j.memsci.2012.09.038 ↗
17. Huang Y, Zhong M, Huang Y, Zhu MS, Pei ZX, Wang ZF, Xue Q, Xie XM, Zhi C (2015) A self-healable and highly stretchable supercapacitor based on a dual crosslinked polyelectrolyte. Nat. Commun. 6:1031010.1038/ncomms10310 ↗
18. Yu JL, Lu WB, Pei SP, Gong K, Wang LY, Meng LH, Huang YD, Smith JP, Booksh KS, Li QW, Byun JH, Oh Y, Yan YS, Chou TW (2016) Omnidirectionally stretchable high-performance supercapacitor based on isotropic buckled carbon nanotube films. ACS Nano 10:5204–521110.1021/acsnano.6b00752 ↗
19. Nair JR, Destro M, Bella F, Appetecchi GB, Gerbaldi C (2016) Thermally cured semi-interpenetrating electrolyte networks (s-IPN) for safe and aging-resistant secondary lithium polymer batteries. J Power Sources 306:258–26710.1016/j.jpowsour.2015.12.001 ↗
20. Lu Q, He Y-B, Yu Q, Li B, Kaneti YV, Yao Y, Kang F, Yang Q-H (2017) Dendrite-free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte. Adv Mater 29:160446010.1002/adma.201604460 ↗
21. Liu Ming, Zhou Dong, He Yan-Bing, Yongzhu Fu, Qin Xianying, Miao Cui, Hongda Du, Li Baohua, Yang Quan-Hong, Zhiqun Lin TS, Zhao F Kang (2017) Novel gel polymer electrolyte for high-performance lithium-sulfur batteries. Nano Energy 22:278–28910.1016/j.nanoen.2016.02.008 ↗
22. Noto VD, Lavina S, Giffin GA, Negro E, Scrosati B (2011) Polymer electrolyte: present, past and future. Electrochim Acta 57:4–1310.1016/j.electacta.2011.08.048 ↗
23. Dong T, Zhang J, Xu G, Chai J, Du H, Wang L, Zhou X (2018) A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery. Energ Environ Sci 11:1197–120310.1039/C7EE03365F ↗
24. Duan H, Yin YX, Zeng XX, Li JY, Shi JL, Shi Y, Wan LJ (2018) In-situ plasticized polymer electrolyte with double-network for flexible solid-state lithium-metal batteries. Energy Storage Mater 10:85–9110.1016/j.ensm.2017.06.017 ↗
25. Deng C, Jiang Y, Fan Z, Zhao S, Ouyang D, Tan J, Zhang P, Ding Y (2019) Sepiolite-based separator for advanced Li-ion batteries. Appl Surf Sci 484:446–45210.1016/j.apsusc.2019.04.141 ↗
26. Fan W, Li NW, Zhang X, Zhao S, Cao R, Yin Y, Li C (2018) A dual-salt gel polymer electrolyte with 3D cross-linked polymer network for dendrite-free lithium metal batteries. Adv Mater 5:1800559
27. Meyer WH (1998) Polymer electrolytes for lithium-ion batteries. Adv Mater 10:439–44810.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I ↗
28. Liao H, Hong H, Zhang H, Li Z (2016) Preparation of hydrophilic polyethylene/methylcellulose blend microporous membranes for separator of lithium-ion batteries. J Membr Sci 498:147–15710.1016/j.memsci.2015.09.064 ↗
29. Liao H, Zhang H, Hong H, Li Z, Qin G, Zhu H, Lin Y (2016) Novel cellulose aerogel coated on polypropylene separator as gel polymer electrolyte with high ionic conductivity for lithium-ion batteries. J Membr Sci 514:332–33910.1016/j.memsci.2016.05.009 ↗
30. Liao H, Zhang H, Qin G, Li Z, Li L, Hong H (2017) A macro-porous graphene oxide-based membrane as a separator with enhanced thermal stability for high-safety lithium-ion batteries. RSC Adv 7:22112–2212010.1039/C7RA02950K ↗
31. Zhai Y, Xiao K, Yu J, Ding B (2015) Fabrication of hierarchical structure SiO2/Polyetherimide-polyurethane nanofibrous separators with high performance for lithium ion batteries. Electrochim Acta 154:219–22610.1016/j.electacta.2014.12.102 ↗
32. Liang S, Shi Y, Ma T, Yan W, Qin S, Wang Y, Zhu Y, Wang H, Wu Y (2019) A compact gel membrane based on a blend of PEO and PVDF for dendrite-free lithium metal anodes. ChemElectroChem 6:1–810.1002/celc.201801707 ↗
33. Zhou D, Liu R, He Y-B, Li F, Liu M, Li B, Yang Q-H, Cai Q, Kang F (2016) SiO2 hollow nanosphere-based composite solid electrolyte for lithium metal batteries to suppress lithium dendrite growth and enhance cycle life. Adv Energy Mater 6:150221410.1002/aenm.201502214 ↗
34. Zhou D, Tkacheva A, Tang X, Sun B, Shanmukaraj D, Li P, Zhang F, Armand M, Wang G (2019) Stable conversion chemistry-based lithium metal batteries enabled by hierarchical multifunctional polymer electrolytes with near-single ion conduction. Angew Chem Int Ed 58:6001–600610.1002/anie.201901582 ↗
35. Chen SM, Wang TL, Chang PY, Yang CH, Lee YC (2016) Poly(ionic liquid) prepared by photopolymerization of ionic liquid monomers as quasi-solid-state electrolytes for dye-sensitized solar cells. React Funct Polym 108:103–11210.1016/j.reactfunctpolym.2016.06.006 ↗
36. Diederichsen KM, Buss HG, Mccloskey BD (2017) The compensation effect in the Vogel–Tammann–Fulcher (VTF) equation for polymer-based electrolytes. Macromolecules 50:3831–384010.1021/acs.macromol.7b00423 ↗
37. Hiller MM, Joost M, Gores HJ, Passerini S, Wiemhöfer HD (2013) The influence of interface polarization on the determination of lithium transference numbers of salt in polyethylene oxide electrolytes. Electrochim Acta 114:21–2910.1016/j.electacta.2013.09.138 ↗
38. Liao H, Chen H, Zhou F, Zhang Z, Chen H (2019) Dendrite-free lithium deposition induced by mechanical strong sponge-supported unique 3D cross-linking polymer electrolyte for lithium metal batteries. J Power Sources 435:22674810.1016/j.jpowsour.2019.226748 ↗
39. Gao Y, Zhao Y, Li YC, Huang Q, Mallouk TE, Wang D (2017) Interfacial chemistry regulation via a skin-grafting strategy enables high-performance lithium-metal batteries. J Am Chem Soc 139:15288–1529110.1021/jacs.7b06437 ↗
40. Chen T, Kong W, Zhang Z, Wang L, Hu Y, Zhu G, Chen R, Ma L, Yan W, Wang Y, Liu J, Jin Z (2018) Ionic liquid-immobilized polymer gel electrolyte with self-healing capability, high ionic conductivity and heat resistance for dendrite-free lithium metal batteries. Nano Energy 54:17–2510.1016/j.nanoen.2018.09.059 ↗
41. Wang H, Lin D, Liu Y, Li Y, Cui Y (2017) Ultrahigh-current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework. Sci. Adv. 3:e170130110.1126/sciadv.1701301 ↗