Development and characterization of Al/MWCNT–Al2O3 hybrid composite by accumulative roll bonding
Source abstract
Abstract
A high-strength hybrid composite was produced by eco-friendly accumulative roll bonding (ARB) process. Multiwall carbon nanotubes and alumina layers as reinforcements were embedded in a matrix of aluminum 1100. The produced hybrid composite was evaluated for structural changes and mechanical properties. The structural micrographs showed that by increasing the rolling cycles, a more uniform distribution of the reinforcements is obtained. After ten cycles of ARB, the composite material reached strength of about 300% higher than that of the annealed aluminum 1100. The elongation of the composite material is decreased by adding reinforcements. However, at a constant value of reinforcements, the elongation slowly increased during sequential rollings. A shear ductile rupture type failure was responsible for fracture of tensile test specimens of both composite and monolithic specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Shamanian M, Mohammadnezhad M, Szpunar J (2014) Production of high-strength Al/Al2O3/WC composite by accumulative roll bonding. J Mater Eng Perform 23:3152–315810.1007/s11665-014-1087-4 ↗
2. Wang X, Chen GQ, LiG B, Wu H, Jiang DM (2009) Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite. J Mater Sci 44:4303–4307. https://doi.org/10.1007/s10853-009-3639-910.1007/s10853-009-3639-9 ↗
3. Baldan A (2004) Adhesively-bonded joints in metallic alloys, polymers and composite materials: mechanical and environmental durability performance. J Mater Sci 39:4729–4797. https://doi.org/10.1023/B:JMSC.0000035317.87118.ab10.1023/B:JMSC.0000035317.87118.ab ↗
4. Chaudhary SP, Singh PK, Rai S, Patel H, Kumar B (2015) A review on effect of reinforcement particles on the mechanical properties of aluminium based composites. Int J Innov Res Sci Eng Technol 4:8377
5. Hamed AB (2014) A novel technique for dispersion of MWCNTs in aluminium alloy. Minia J Eng Technol 33:195–207
6. Kim HH, Babu JSS, Kang CG (2013) Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements. Mater Sci Eng A573:92–9910.1016/j.msea.2013.02.041 ↗
7. Bodunrin MO, Alanemea KK, Chownb LH (2015) Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J Mater Technol 4:434–445
8. Elahinejad S, Sharifi H, Nasresfahani MR (2017) Vibration effects on the fabrication and the interface of Al–SiC composite produced by the pressureless infiltration method. Surf Rev Lett 25:1
9. Sajjadi SA, Parizi MT, Ezatpour HR, Sedghi A (2012) Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties. J Alloy Compd 511:226–23110.1016/j.jallcom.2011.08.105 ↗
10. Noguch T (2014) Sintering behavior of CNT reinforced Al6061 and Al2124 nanocomposites. Mater Trans 45:602–61010.2320/matertrans.45.602 ↗
11. Cavaliere P, Sadeghi B, Shabani A (2017) Carbon nanotube reinforced aluminum matrix composites produced by spark plasma sintering. J Mater Sci 52:8618–8629. https://doi.org/10.1007/s10853-017-1086-610.1007/s10853-017-1086-6 ↗
12. Shamanian M, Szpunar JA, Mohammadnezhad M (2015) Fabrication and characterization of Al–Al2O3–ZrC composite produced by accumulative roll bonding (ARB) process. J Alloy Compd 618:19–2610.1016/j.jallcom.2014.08.136 ↗
13. Jamaati R, Toroghinejad MR, Najafizadeh A (2010) An alternative method of processing MMCs by CAR process. Mater Sci Eng A 527:2720–272410.1016/j.msea.2009.12.051 ↗
14. Mohamed HA, Washburn J (1975) Mechanism of solid state pressure welding. Weld Res Suppl 30:302–310
15. Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579–58310.1016/S1359-6454(98)00365-6 ↗
16. Chen MC, Hsieh HC, Wu W (2006) The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite. J Alloy Compd 416:169–17210.1016/j.jallcom.2005.09.017 ↗
17. Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scr Mater 39:1221–122710.1016/S1359-6462(98)00302-9 ↗
18. Tsuji N, Ito Y, Saito Y, Minamino Y (2002) Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scr Mater 47:893–89910.1016/S1359-6462(02)00282-8 ↗
19. Hansen N, Huang X, Ueji R, Tsuji N (2004) Structure and strength after large strain deformation. Mater Sci Eng A 387:191–19410.1016/j.msea.2004.02.078 ↗
20. Yang D, Cizek P, Hodgson P, Wen C (2010) Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding. Scr Mater 62:321–32410.1016/j.scriptamat.2009.11.036 ↗
21. Gabriel BL (1998) Scanning electron microscopy. In: ASM handbooks, vol 12. p 173
22. Hasnaoui A, Swygenhoven HV, Derlet PM (2003) Dimples on nanocrystalline fracture surfaces as evidence for shear plane formation. Science 300:1550–155210.1126/science.1084284 ↗
23. Xing ZP, Kang SB, Kim HW (2002) Structure and properties of AA3003 alloy produced by accumulative roll bonding process. J Mater Sci A 37:717–722. https://doi.org/10.1023/A:101387952869710.1023/A:1013879528697 ↗
24. Barsoum I, Faleskog J (2007) Rupture mechanisms in combined tension and shear—experiments. Int J Solids Struct 44:1768–178610.1016/j.ijsolstr.2006.09.031 ↗