A semitopological mean-field model of discontinuous dynamic recrystallization
Source abstract
Abstract
Some mean-field models are currently available for discontinuous dynamic recrystallization (DDRX). They offer an affordable way to predict the variation of averages altered by DDRX as flow stress, grain size and recrystallized fraction. They predict also a grain-size distribution, but it appears unrealistic, at least if a deterministic equation governs the migration of grain boundaries. The present paper exposes an extension to mean-field models which introduces some topological and stochastic features in the migration equation. This extension aims to bridge the gap between mean- and full-field models. It allows predicting realistic distributions of grain size by keeping the simplicity of mean-field approaches. The results obtained are consistent with experimental data on an 18% Cr–11% Ni stainless steel.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Alterthum Hv (1922) Zur Theorie der Rekristallisation. Zeitschrift für Elektrochemie und angewandte physikalische Chemie 28(15–16):347–356. https://doi.org/10.1002/bbpc.1922028150410.1002/bbpc.19220281504 ↗
2. Avrami M (1939) Kinetics of phase change. I: general theory. J Chem Phys 7(12):1103–1112. https://doi.org/10.1063/1.175038010.1063/1.1750380 ↗
3. Bailey JE, Hirsch PB (1962) The recrystallization process in some polycrystalline metals. Proc R Soc Lond A Math Phys Eng Sci 267(1328):11–30. https://doi.org/10.1098/rspa.1962.008010.1098/rspa.1962.0080 ↗
4. Beck PA (1954) Annealing of cold worked metals. Adv Phys Q Suppl Philos Mag 3(11):245–324. https://doi.org/10.1080/0001873540010120310.1080/00018735400101203 ↗
5. Beltran OG, Huang K, Logé RE (2015) A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress. Comput Mater Sci 102:293–303. https://doi.org/10.1016/j.commatsci.2015.02.04310.1016/j.commatsci.2015.02.043 ↗
6. Bergström Y (1970) A dislocation model for the stress–strain behaviour of polycrystalline $$\alpha $$ α -Fe with special emphasis on the variation of the densities of mobile and immobile dislocations. Mater Sci Eng 5(4):193–200. https://doi.org/10.1016/0025-5416(70)90081-910.1016/0025-5416(70)90081-9 ↗
7. Bernacki M, Logé RE, Coupez Th (2011) Level set framework for the finite-element modeling of recrystallization and grain growth in polycrystalline materials. Scripta Materialia 64(6):525–528. https://doi.org/10.1016/j.scriptamat.2010.11.03210.1016/j.scriptamat.2010.11.032 ↗
8. Bernard P, Bag S, Huang K, Logé RE (2011) A two-site mean field model of discontinuous dynamic recrystallization. Mater Sci Eng A 528(24):7357–7367. https://doi.org/10.1016/j.msea.2011.06.02310.1016/j.msea.2011.06.023 ↗
9. Bocher Ph, Azar J, Adams BL, Jonas JJ (1998) Using OIM to interpret the dynamically recrystallized texture of a low stacking fault energy FCC material. Mater Sci Forum 273–275:249–254. https://doi.org/10.4028/www.scientific.net/MSF.273-275.24910.4028/www.scientific.net/MSF.273-275.249 ↗
10. Burgers WG (1941) Rekristallisation verformter Zustand und Erholung, Handbuch der Metallphysik, vol 3 (Part. 2). Akademische Verlagsgesellschaft Becker and Erler Kon, Ge, Leipzig
11. Canova GR, Wenk HR, Molinari A (1992) Deformation modelling of multi-phase polycrystals: case of a quartz-mica aggregate. Acta Metallurgica et Materialia 40(7):1519–1530. https://doi.org/10.1016/0956-7151(92)90095-V10.1016/0956-7151(92)90095-V ↗
12. Chen LQ (1995) A novel computer simulation technique for modeling grain growth. Scripta Metallurgica et Materiala 32(1):115–120. https://doi.org/10.1016/S0956-716X(99)80022-310.1016/S0956-716X(99)80022-3 ↗
13. Cocks ACF, Gill SPA (1996) A variational approach to two dimensional grain growth - I. Theory. Acta Materialia 44(12):4765–4775. https://doi.org/10.1016/S1359-6454(96)00121-810.1016/S1359-6454(96)00121-8 ↗
14. Cram DG, Zurob HS, Bréchet YJM, ChrR Hutchinson (2009) Modelling discontinuous dynamic recrystallization using a physically based model for nucleation. Acta Materialia 57(17):5218–5228. https://doi.org/10.1016/j.actamat.2009.07.02410.1016/j.actamat.2009.07.024 ↗
15. Damamme G, Piot D, Montheillet F, Semiatin SL (2010) A model of discontinuous dynamic recrystallization and its application for nickel alloys. Mater Sci Forum 638–642:2543–2548. https://doi.org/10.4028/www.scientific.net/MSF.638-642.254310.4028/www.scientific.net/MSF.638-642.2543 ↗
16. Dehghan-Manshadi A, Barnett MR, Hodgson PD (2008) Hot deformation and recrystallization of austenitic stainless steel: part I. Dynamic recrystallization. Metall Mater Trans A Phys Metall Mater Sci 39 A(6):1359–1370. https://doi.org/10.1007/s11661-008-9512-7 , http://ro.uow.edu.au/engpapers/97510.1007/s11661-008-9512-7 ↗
17. DeHoff RT, Rhines FN (1968) Quantitative microscopy. Materials science and engineering. McGraw-Hill Education, New York
18. Derby B (1991) The dependence of grain size on stress during dynamic recrystallisation. Acta Metallurgica et Materialia 39(5):955–962. https://doi.org/10.1016/0956-7151(91)90295-C10.1016/0956-7151(91)90295-C ↗
19. Derby B, Ashby MF (1987) On dynamic recrystallization. Scripta Metallurgica 21(6):879–884. https://doi.org/10.1016/0036-9748(87)90341-310.1016/0036-9748(87)90341-3 ↗
20. Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Juul Jensen D, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD (1997) Current issues in recrystallization: a review. Mater Sci Eng A Struct Mater Prop Microstruct Process 238(2):219–274. https://doi.org/10.1016/S0921-5093(97)00424-310.1016/S0921-5093(97)00424-3 ↗
21. Favre J, Fabrègue D, Piot D, Tang N, Koizumi Y, Maire É, Chiba A (2013) Modeling grain boundary motion and dynamic recrystallization in pure metals. Metall Mater Trans A Phys Metall Mater Sci 44(13):5861–5875. https://doi.org/10.1007/s11661-013-1914-510.1007/s11661-013-1914-5 ↗
22. Fields JDS, Backofen WA (1957) Determination of strain-hardening characteristics by torsion testing. In: ASTM Proceedings 1957 ( $$60^{{\rm th}}$$ 60 th Annual Meeting of the ASTM) PRO1957-57, vol 57, pp 1259–1271
23. Ghosh C, Basabe VV, Jonas JJ (2013) Determination of the critical strains for the initiation of dynamic transformation and dynamic recrystallization in four steels of increasing carbon contents. Steel Res Int 84(5):490–494. https://doi.org/10.1002/srin.20120018810.1002/srin.201200188 ↗
24. Gottstein G, Shvindlerman LS (2010) Grain boundary migration in metals: thermodynamics, kinetics, applications, 2nd edn. Materials science and technology. CRC Press Taylor & Francis Group, Boca Raton
25. Gottstein G, Zabardjadi D, Mecking H (1979) Dynamic recrystallization in tension-deformed copper single crystals. Metal Sci 13(3–4):223–227. https://doi.org/10.1179/msc.1979.13.3-4.22310.1179/msc.1979.13.3-4.223 ↗
26. Haeßner F (ed) (1978) Recrystallization of metallic materials, 2nd edn. Dr. Riederer Verlag GmbH, Ge, Stuttgart
27. Hallberg H (2011) Approaches to modeling of recrystallization. Metals 1(1):16–48. https://doi.org/10.3390/met101001610.3390/met1010016 ↗
28. Hallberg H (2013) A modified level set approach to 2D modeling of dynamic recrystallization. Model Simul Mater Sci Eng 21(8). https://doi.org/10.1088/0965-0393/21/8/085012 , http://stacks.iop.org/0965-0393/21/i=8/a=08501210.1088/0965-0393/21/8/085012 ↗
29. Hallberg H, Wallin M, Ristinmaa M (2010) Simulation of discontinuous dynamic recrystallization in pure Cu using a probabilistic cellular automaton. Comput Mater Sci 49(1):25–34. https://doi.org/10.1016/j.commatsci.2010.04.01210.1016/j.commatsci.2010.04.012 ↗
30. Hesselbarth HW, Göbel IR (1991) Simulation of recrystallization by cellular automata. Acta Metallurgica et Materialia 39(9):2135–2143. https://doi.org/10.1016/0956-7151(91)90183-210.1016/0956-7151(91)90183-2 ↗
31. Huang K, Logé RE (2016) A review of dynamic recrystallization phenomena in metallic materials. Mater Des 111:548–574. https://doi.org/10.1016/j.matdes.2016.09.01210.1016/j.matdes.2016.09.012 ↗
32. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Elsevier Ltd, Kidlington. http://www.sciencedirect.com/science/book/9780080441641 . [(1st Ed: 1995), ISBN: 0 08 044164 5, xxx–528 p.]10.1016/B978-008044164-1/50016-5 ↗
33. Jonas JJ (1994) Dynamic recrystallization-scientific curiosity or industrial tool? Mater Sci Eng A 184(2):155–165. https://doi.org/10.1016/0921-5093(94)91028-610.1016/0921-5093(94)91028-6 ↗
34. Jonas JJ, Quelennec X, Jiang L, Martin É (2009) The Avrami kinetics of dynamic recrystallization. Acta Materialia 57(9):2748–2756. https://doi.org/10.1016/j.actamat.2009.02.03310.1016/j.actamat.2009.02.033 ↗
35. Kocks UF (1976) Laws for work-hardening and low-temperature creep. ASME J Eng Mater Technol 98(1):76–85. https://doi.org/10.1115/1.344334010.1115/1.3443340 ↗
36. Kocks UF, Mecking H (2003) Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci 48(3):171–273. https://doi.org/10.1016/S0079-6425(02)00003-810.1016/S0079-6425(02)00003-8 ↗
37. Laasraoui A, Jonas JJ (1991) Prediction of steel flow stresses at high temperatures and strain rates. Metall Mater Trans A Phys Metall Mater Sci 22(7):1545–1558. https://doi.org/10.1007/BF0266736810.1007/BF02667368 ↗
38. Maire L, Scholtes B, Moussa C, Bozzolo N, Pino Muñoz D, Settefrati A, Bernacki M (2017) Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws. Mater Des 133:498–519. https://doi.org/10.1016/j.matdes.2017.08.01510.1016/j.matdes.2017.08.015 ↗
39. Maurice Cl, Humphreys FJ (1998) 2D and 3D curvature driven vertex simulations of grain growth. In: Weiland H, Adams BL, Rollett AD (eds) Grain growth in polycrystalline materials III. Minerals, Metals & Materials Society, Pittsburgh, pp 81–90
40. Mellbin Y, Hallberg H, Ristinmaa M (2017) An extended vertex and crystal plasticity framework for efficient multiscale modeling of polycrystalline materials. Int J Solilds Struct 125:150–160. https://doi.org/10.1016/j.ijsolstr.2017.07.00910.1016/j.ijsolstr.2017.07.009 ↗
41. Moelans N, Wendler F, Nestler B (2009) Comparative study of two phase-field models for grain growth. Comput Mater Sci 46(2):479–490. https://doi.org/10.1016/j.commatsci.2009.03.03710.1016/j.commatsci.2009.03.037 ↗
42. Molodov DA (1999) Migration of high angle grain boundaries in metals. Shaker Verlag GmbH, Berichte Aus Der Werkstofftechnik
43. Montheillet F, Jonas JJ (2009) Models of recrystallization. In: Furrer DU, Semiatin SL (eds) ASM handbook–fundamentals of modeling for metals processing, vol 22A. ASM International, Materials Park, pp 220–23110.31399/asm.hb.v22a.a0005403 ↗
44. Montheillet F, Thomas JPh, Damamme G (2002) Distribution des la taille des grains recristallisés dynamiquement dans les matériaux métalliques. In: CR ROM Actes du congrès Matériaux de Tours, Fédération française des Matériaux, CM-11-011
45. Montheillet F, Lurdos O, Damamme G (2009) A grain scale approach for modeling steady-state discontinuous dynamic recrystallization. Acta Materialia 57(5):1602–1612. https://doi.org/10.1016/j.actamat.2008.11.04410.1016/j.actamat.2008.11.044 ↗
46. Montheillet F, Piot D, Matougui N, Fares ML (2014) A critical assessment of three usual equations for strain hardening and dynamic recovery. Metall Mater Trans A Phys Metall Mater Sci 45(10):4324–4332. https://doi.org/10.1007/s11661-014-2388-910.1007/s11661-014-2388-9 ↗
47. Nagai T, Ohta S, Kawasaki K, Okuzono T (1990) Computer simulation of cellular pattern growth in two and three dimensions. Phase Transit Multinatl J 28(1–4):177–211. https://doi.org/10.1080/0141159900820793810.1080/01411599008207938 ↗
48. Orend J, Hagemann F, Klose FB, Maas B, Palkowski H (2015) A new unified approach for modeling recrystallization during hot rolling of steel. Mater Sci Eng A 647:191–200. https://doi.org/10.1016/j.msea.2015.08.08510.1016/j.msea.2015.08.085 ↗
49. Peczak P (1995) A Monte Carlo study of influence of deformation temperature on dynamic recrystallization. Acta Metallurgica et Materialia 43(3):1279–1291. https://doi.org/10.1016/0956-7151(94)00280-U10.1016/0956-7151(94)00280-U ↗
50. Piot D, Damamme G, Montheillet F (2012) Mesoscopic modeling of discontinuous dynamic recrystallization: steady-state grain size distributions. Mater Sci Forum 706–709:234–239. https://doi.org/10.4028/www.scientific.net/MSF.706-709.23410.4028/www.scientific.net/MSF.706-709.234 ↗
51. Piot D, Smagghe G, Montheillet F (2017a) Modeling of grain-boundary mobility and nucleation rate during discontinuous dynamic recrystallization in Ni–Nb alloys and a high-purity alloy derived from SAE 304L. Mater Sci Forum 879:1501–1506. https://doi.org/10.4028/www.scientific.net/MSF.879.150110.4028/www.scientific.net/MSF.879.1501 ↗
52. Piot D, Smagghe G, Montheillet F, Kermouche G, Bernacki M, Montouchet A, Perrin G (2017b) Une approche semi–topologique pour la modélisation en champs moyens des recristallisations dynamique et métadynamique. In: Journées Annuelles SF2M, SF2M, F: Lyon. URL https://sf2m.conference-services.net/resources/1448/5359/pdf/JA2017_0120.pdf
53. Ponge D, Gottstein G (1998) Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior. Acta Materialia 46(1):69–80. https://doi.org/10.1016/S1359-6454(97)00233-410.1016/S1359-6454(97)00233-4 ↗
54. Quey R, Piot D, Driver JH (2010) Microtexture tracking in hot-deformed polycrystalline aluminium: comparison with simulations. Acta Materialia 58(6):2271–2281. https://doi.org/10.1016/j.actamat.2009.12.01410.1016/j.actamat.2009.12.014 ↗
55. Robert W, Piot D, Driver JH (2004) A rapid deformation texture model incorporating grain interactions. Scripta Materialia 50(9):1215–1219. https://doi.org/10.1016/j.scriptamat.2004.02.00710.1016/j.scriptamat.2004.02.007 ↗
56. Roberts W, Ahlblom B (1978) A nucleation criterion for dynamic recrystallization during hot working. Acta Metallurgica 26(5):801–813. https://doi.org/10.1016/0001-6160(78)90030-510.1016/0001-6160(78)90030-5 ↗
57. Rollett AD (1997) Overview of modeling and simulation of recrystallization. Prog Mater Sci 42(1–4):79–99. https://doi.org/10.1016/S0079-6425(97)00008-X10.1016/S0079-6425(97)00008-X ↗
58. Rollett AD, Luton MJ, Srolovitz DJ (1992) Microstructural simulation of dynamic recrystallization. Acta Metallurgica et Materialia 40(1):43–55. https://doi.org/10.1016/0956-7151(92)90198-N10.1016/0956-7151(92)90198-N ↗
59. Sakai T (1995) Dynamic recrystallization microstructures under hot working conditions. J Mater Process Technol 53(1–2):349–361. https://doi.org/10.1016/0924-0136(95)01992-N10.1016/0924-0136(95)01992-N ↗
60. Sakai T, Jonas JJ (1984) Overview no. 35 dynamic recrystallization: mechanical and microstructural considerations. Acta Metallurgica 32(2):189–209. https://doi.org/10.1016/0001-6160(84)90049-X10.1016/0001-6160(84)90049-X ↗
61. Sakai T, Belyakov A, Kaibyshev R, Miura H, Jonas JJ (2014) Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Prog Mater Sci 60:130–207. https://doi.org/10.1016/j.pmatsci.2013.09.00210.1016/j.pmatsci.2013.09.002 ↗
62. Sandström R, Lagneborg R (1975) A model for hot working occurring by recrystallization. Acta Metallurgica 23(3):387–398. https://doi.org/10.1016/0001-6160(75)90132-710.1016/0001-6160(75)90132-7 ↗
63. Smagghe G, Piot D, Montheillet F, Perrin G, Montouchet A, Kermouche G (2017) The issue of grain size distribution using mean field models for dynamic and post-dynamic recrystallization. Mater Sci Forum 879:1794–1799. https://doi.org/10.4028/www.scientific.net/MSF.879.179410.4028/www.scientific.net/MSF.879.1794 ↗
64. Stüwe HP, Ortner B (1974) Recrystallization in hot working and creep. Metal Sci 8(1):161–167. https://doi.org/10.1179/msc.1974.8.1.16110.1179/msc.1974.8.1.161 ↗
65. Van Arkel AE, Van Bruggen MG (1928) Rekristallisationserscheinungen bei Aluminium. II. Zeitschrift für Physik 51(7–8):520–533. https://doi.org/10.1007/BF0132784310.1007/BF01327843 ↗
66. Van Houtte P, Li S, Seefeldt M, Delannay L (2005) Deformation texture prediction: from the Taylor model to the advanced Lamel model. Int J Plast 21(3):589–624. https://doi.org/10.1016/j.ijplas.2004.04.01110.1016/j.ijplas.2004.04.011 ↗
67. Yoshie A, Morikawa H, Onoe Y, Itoh K (1987) Formulation of static recrystallization of austenite in hot rolling process of steel plate. Trans Iron Steel Inst Jpn 27(6):425–431. https://doi.org/10.2355/isijinternational1966.27.42510.2355/isijinternational1966.27.425 ↗