High-temperature-tolerable superconducting Nb-alloy and its application to Pb- and Cd-free superconducting joints between NbTi and Nb3Sn wires
Source abstract
Abstract
Abstract For more than 30 years, Pb–Bi alloy and Wood's metal (50% Bi, 26.7% Pb, 13.3% Sn, and 10% Cd) have been used as representative superconducting solder intermedia to establish superconducting joints between NbTi and Nb3Sn wires in high-field nuclear magnetic resonance magnet systems. However, the use of Pb and Cd has been severely restricted by environmental regulations, such as the Restriction of Hazardous Substances Directive. Herein, a novel method of forming a superconducting joint between NbTi and Nb3Sn wires without Pb and Cd has been proposed. This approach is based on metallurgical bonding processes using a superconducting Nb-alloy intermedium, whose fine microstructure is maintained even after exposure to temperatures higher than 650 °C. Further, fine crystal defects become sources of magnetic flux pinning centers. Among transition elements close to Nb, Hf is considered the most suitable additive for realizing high-temperature-tolerable (HTT) superconducting Nb-alloy intermedia. Utilizing the HTT characteristic of Nb–Hf, a superconducting joint between Nb3Sn filaments and one end of the Nb–Hf alloy core was created by forming a superconducting Nb3Sn layer at the interface through a chemical reaction. The other end of the Nb–Hf alloy core was cold-pressed with NbTi filaments, to connect their active new surfaces to each other in order to create a superconducting joint. Ultimately, a superconducting joint between NbTi and Nb3Sn wires was realized with a high critical magnetic field (Bc2) of more than 1 T. The formation of the superconducting joint was confirmed by current decay measurements. This method of forming a superconducting joint is promising for application in environmentally friendly nuclear magnetic resonance magnet systems. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Superconducting Materials and Applications · Physics of Superconductivity and Magnetism · Superconductivity in MgB2 and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Thornton RF (1988) Superconducting joint for superconducting wires and coils and method of forming. US Pat 4744506. https://patents.google.com/patent/US4744506
2. Swenson CA, Markiewicz WD (1999) Persistent joint development for high field NMR. IEEE Trans Appl Supercond 9:185–188. https://doi.org/10.1109/77.78326710.1109/77.783267 ↗
3. Evetts JE, Wade JMA (1970) Superconducting properties and the phase diagrams of the PbBi and PbIn alloy systems. J Phys Chem Solids 31:973–982. https://doi.org/10.1016/0022-3697(70)90308-210.1016/0022-3697(70)90308-2 ↗
4. Brittles GD, Mousavi T, Grovenor CRM et al (2015) Persistent current joints between technological superconductors. Supercond Sci Technol 28:93001. https://doi.org/10.1088/0953-2048/28/9/09300110.1088/0953-2048/28/9/093001 ↗
5. Patel D, Kim SH, Qiu W et al (2019) Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation. Sci Rep 9:1–7. https://doi.org/10.1038/s41598-019-50549-710.1038/s41598-019-50549-7 ↗
6. Okada T, Takahata K, Nishijima S et al (1988) Magnetic shielding with superconducting wires. IEEE Trans Magn 24:895–898. https://doi.org/10.1109/20.1137010.1109/20.11370 ↗
7. Levy SA, Kim YB, Kraft RW (1966) Effect of structure on the superconducting properties of eutectic alloys. J Appl Phys 37:3659–3665. https://doi.org/10.1063/1.170790110.1063/1.1707901 ↗
8. Mousavi T, Aksoy C, Grovenor CRM, Speller SC (2016) Microstructure and superconducting properties of Sn-In and Sn-In-Bi alloys as Pb-free superconducting solders. Supercond Sci Technol 29:015012. https://doi.org/10.1088/0953-2048/29/1/01501210.1088/0953-2048/29/1/015012 ↗
9. Santra S, Davies T, Matthews G et al (2019) The effect of the size of NbTi filaments on interfacial reactions and the properties of InSn-based superconducting solder joints. Mater Des 176:107836. https://doi.org/10.1016/j.matdes.2019.10783610.1016/j.matdes.2019.107836 ↗
10. Phillip S, Porto JV, Parpia JM (1995) Two methods of fabricating reliable superconducting joints with multifilamentary Nb-Ti superconducting wire. J Low Temp Phys 101:581–585. https://doi.org/10.1007/BF0075335710.1007/BF00753357 ↗
11. Liu J, Cheng J, Zhou F et al (2013) Electrical properties of cold-pressing welded NbTi persistent joints. Cryogenics 58:62–67. https://doi.org/10.1016/j.cryogenics.2013.09.01110.1016/j.cryogenics.2013.09.011 ↗
12. Mizumaki S, Yamamoto A (1997) Experimental study of current sharing and transfer in superconductor joint. IEEE Trans Appiled Supercond 7:805–807. https://doi.org/10.1109/77.61462510.1109/77.614625 ↗
13. Hardy GF, Hulm JK (1953) Superconducting silicides and germanides. Phys Rev 89:884–884. https://doi.org/10.1103/PhysRev.89.88410.1103/PhysRev.89.884 ↗
14. Matthias BT, Geballe TH, Geller S, Corenzwit E (1954) Superconductivity of Nb3Sn. Phys Rev 95:1435–1435. https://doi.org/10.1103/PhysRev.95.143510.1103/PhysRev.95.1435 ↗
15. Goodman BB (1966) Type II superconductors. Reports Prog Phys 29:302. https://doi.org/10.1088/0034-4885/29/2/30210.1088/0034-4885/29/2/302 ↗
16. Foner S, Schwartz BB (1981) Superconductor materials science: metallurgy, fabrication, and applications. Springer, US, Boston, MA10.1007/978-1-4757-0037-4 ↗
17. Berlincourt TG, Hake RR (1962) Upper critical fields of transition metal alloy superconductors. Phys Rev Lett 9:293–295. https://doi.org/10.1103/PhysRevLett.9.29310.1103/PhysRevLett.9.293 ↗
18. Hempstead CF, Kim YB (1964) Resistive transitions and surface effects in type-II superconductors. Phys Rev Lett 12:145–148. https://doi.org/10.1103/PhysRevLett.12.14510.1103/PhysRevLett.12.145 ↗
19. Ralls KM (1966) Internal surface superconductivity: the relationship between resistive critical field and bulk upper critical field. Phys Lett 23:29–31. https://doi.org/10.1016/0031-9163(66)90240-X10.1016/0031-9163(66)90240-X ↗
20. Suenaga M, Ralls KM (1969) Some superconducting properties of Ti–Nb–Ta ternary alloys. J Appl Phys 40:4457–4463. https://doi.org/10.1063/1.165721510.1063/1.1657215 ↗
21. Bychkova MI, Baron VV, Savitskii EM (1970) Superconducting properties of Nb—Hf alloys and the effect of mechanical and Heat treatment on their structure and properties. Physics and Metallurgy of Superconductors. In: Proceedings of the Second and Third Conferences on Metallurgy, Physical Chemistry, and Metal Physics of Superconductors held at Moscow in May 1965 and May 1966, pp 74–79. https://doi.org/10.1007/978-1-4684-8220-1_1310.1007/978-1-4684-8220-1_13 ↗
22. Hill DC, Rose RM (1971) Experimental tests of proposed relations between the critical field and dislocation cell structure of superconducting niobium. Metall Trans 2:585–589. https://doi.org/10.1007/BF0266335310.1007/BF02663353 ↗
23. Dew-Hughes D (1974) Flux pinning mechanism in type II superconductors. Philos Mag 30:293–305. https://doi.org/10.1080/1478643980820655610.1080/14786439808206556 ↗
24. Kramer EJ (1973) Scaling laws for flux pinning in hard superconductors. J Appl Phys 44:1360–1370. https://doi.org/10.1063/1.166235310.1063/1.1662353 ↗
25. Sernetz F (1976) Flux pinning in porous type II superconductors. J Low Temp Phys 24:85–103. https://doi.org/10.1007/BF0065919710.1007/BF00659197 ↗
26. Larbalestier DC, West AW (1984) New perspectives on flux pinning in niobium-titanium composite superconductors. Acta Metall 32:1871–1881. https://doi.org/10.1016/0001-6160(84)90168-810.1016/0001-6160(84)90168-8 ↗
27. Meingast C, Lee PJ, Larbalestier DC (1989) Quantitative description of a high Jc Nb-Ti superconductor during its final optimization strain. I. Microstructure, Tc, Hc2, and resistivity. J Appl Phys 66:5962–5970. https://doi.org/10.1063/1.34362410.1063/1.343624 ↗
28. Lee PJ, Larbalestier DC (1987) Development of nanometer scale structures in composites of Nb-Ti and their effect on the superconducting critical current density. Acta Metall 35:2523–2536. https://doi.org/10.1016/0001-6160(87)90149-010.1016/0001-6160(87)90149-0 ↗
29. Lee PJ, McKinnell JC, Larbalestier DC (1989) Microstructure control in high Ti NbTi alloys. IEEE Trans Magn 25:1918–1921. https://doi.org/10.1109/20.9268110.1109/20.92681 ↗
30. Balachandran S, Tarantini C, Lee PJ et al (2019) Beneficial influence of Hf and Zr additions to Nb4at%Ta on the vortex pinning of Nb3Sn with and without an O source. Supercond Sci Technol 32:044006. https://doi.org/10.1088/1361-6668/aaff0210.1088/1361-6668/aaff02 ↗
31. Banno N, Morita T, Yagai T, Nimori S (2021) Influence of parent Nb-alloy grain morphology on the layer formation of Nb3Sn and its flux pinning characteristics. Scr Mater 199:113822. https://doi.org/10.1016/j.scriptamat.2021.11382210.1016/j.scriptamat.2021.113822 ↗
32. Kobayashi K, Nishijima G, Uchida A et al (2020) Development of a superconducting joint resistance evaluation system. IEEE Trans Appl Supercond 30:10–13. https://doi.org/10.1109/TASC.2020.296768010.1109/TASC.2020.2967680 ↗
33. Banno N, Morita T, Yu Z et al (2019) Effect of Zn addition and Ti doping position on the diffusion reaction of internal tin Nb3Sn conductors. Supercond Sci Technol. https://doi.org/10.1088/1361-6668/ab463210.1088/1361-6668/ab4632 ↗
34. Doi T, Mitani M, Umezawa T (1966) Superconducting properties of Nb-Zr-Ti ternary alloys (studies of hard superconductor, I). J Jpn Inst Met 30:133–138. https://doi.org/10.2320/jinstmet1952.30.2_13310.2320/jinstmet1952.30.2_133 ↗
35. Nobuki M, Tachikawa K (1970) Fabrication of Nb-Zr superconducting wires. J Jpn Inst Met 34:88–94. https://doi.org/10.2320/jinstmet1952.34.1_8810.2320/jinstmet1952.34.1_88 ↗