Effect of water aging on the apatite formation of a low-modulus Ti–7.5Mo alloy treated with aqueous NaOH

The objective of this experiment was to develop biomimetic calcium phosphate coatings on low-modulus Ti–7.5Mo substrates treated with NaOH aqueous solutions and subsequent water aging before soaking them in simulated body fluid (SBF). Specimens of commercially pure titanium (c.p. Ti) and Ti–7.5Mo were initially treated with 5 M NaOH at 60 °C for 24 h, resulting in the formation of a porous network structure composed of sodium titanate (Na2Ti5O11). Afterward, the specimens were aged in distilled water at 80 °C for 12, 24, or 48 h, and subsequently immersed in 1.5SBF at 37 °C for either 1 or 13 days. The calcium phosphate-forming abilities of the c.p. Ti and Ti–7.5Mo achieved by a single NaOH treatment were low, but were significantly increased by the water aging. The amount of calcium phosphate deposited on the Ti–7.5Mo after NaOH treatment and subsequent water aging for 12 or 24 h was much greater than other conditions. The calcium phosphate-coated Ti–7.5Mo has strong potential as an artificial bone substitute or in other hard tissue-replacement materials with heavy load-bearing requirements due to a favorable combination of bioactivity, low elastic modulus, and low processing costs.