Insights into structure and high-temperature oxidation behavior of plasma electrolytic oxidation ceramic coatings formed in NaAlO2–Na2CrO4 electrolyte
Source abstract
Abstract
Plasma electrolytic oxidation (PEO) ceramic coatings were formed on Ti2AlNb alloy in various NaAlO2 electrolytes containing 2 g L−1, 4 g L−1, and 6 g −1 Na2CrO4 additive, respectively. The influence of Na2CrO4 additive in NaAlO2 electrolyte on structure and high-temperature oxidation behavior at 800 °C was investigated. The Na2CrO4 additive in the NaAlO2 electrolyte not only promotes the formation of γ-Al2O3 phase and densification of ceramic coatings, but also participates directly in the growth of ceramic coating to form new Cr3O and (Al0.948Cr0.052)2O3 phases. The PEO ceramic coatings formed in NaAlO2 electrolytes with 2 g L−1 and 4 g L−1 Na2CrO4 additive show better oxidation resistance than those PEO coatings formed in a NaAlO2 basic electrolyte based on isothermal oxidation tests at 800 °C up to 150 h. A thin and uniform isothermally oxidized layer is formed in the interlayer adjacent the substrate, which protects the substrate from the inward diffusion of oxygen and the outward diffusion of metallic elements. The PEO ceramic coatings formed in NaAlO2 electrolyte with 4 g L−1 Na2CrO4 additive exhibit the least mass gain among all the specimens, which is only a half of the ceramic coating formed in a NaAlO2 basic electrolyte without any Na2CrO4 additive.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Kumpfert J (2001) Intermetallic alloys based on orthorhombic titanium aluminide. Adv Eng Mater 3(11):851–86410.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G ↗
2. Cowen CJ, Boehlert CJ (2006) Microstructure, creep, and tensile behaviour of a Ti–15Al–33Nb (at.%) beta + orthorhombic alloy. Philos Mag 86(1):99–12410.1080/14786430500156773 ↗
3. Kong L, Lu B, Cui X, Du H, Li T, Xiong T (2010) Oxidation behavior of TiAl/Al composite coating on orthorhombic-TiAlNb based alloy at different temperatures. J Therm Spray Technol 19(3):650–65610.1007/s11666-010-9473-4 ↗
4. Zhang XJ, Zhao SY, Gao CX, Wang SJ (2009) Amorphous sol–gel SiO2 film for protection of an orthorhombic phase alloy against high temperature oxidation. J Sol Gel Sci Technol 49(2):221–22710.1007/s10971-008-1863-4 ↗
5. Wang QM, Zhang K, Gong J, Cui YY, Sun C, Wen LS (2007) NiCoCrAlY coatings with and without an Al2O3/Al interlayer on an orthorhombic TiAlNb-based alloy: oxidation and interdiffusion behaviors. Acta Mater 55(4):1427–143910.1016/j.actamat.2006.09.044 ↗
6. Wu H, Zhang P, Zhao H, Wang L, Xie A (2011) Effect of different alloyed layers on the high temperature oxidation behavior of newly developed Ti2AlNb-based alloys. Appl Surf Sci 257(6):1835–183910.1016/j.apsusc.2010.08.101 ↗
7. Li HQ, Wang QM, Jiang SM, Ma J, Gong J, Sun C (2011) Oxidation and interfacial fracture behaviour of NiCrAlY/Al2O3 coatings on an orthorhombic-Ti2AlNb alloy. Corros Sci 53(3):1097–110610.1016/j.corsci.2010.12.007 ↗
8. Tang H, Sun Q, Yi CG, Jiang ZH, Wang FP (2012) High emissivity coatings on titanium alloy prepared by micro-arc oxidation for high temperature application. J Mater Sci 47(5):2162–2168. https://doi.org/10.1007/s10853-011-6017-310.1007/s10853-011-6017-3 ↗
9. Wang ZW, Wang YM, Liu Y, Xu JL, Guo LX, Zhou Y, Ouyang JH, Dai JM (2011) Microstructure and infrared emissivity property of coating containing TiO2 formed on titanium alloy by microarc oxidation. Curr Appl Phys 11(6):1405–140910.1016/j.cap.2011.04.011 ↗
10. Rakoch AG, Bardin IV (2010) Microarc oxidation of light alloys. Metallurgist 54(5–6):378–38310.1007/s11015-010-9309-y ↗
11. Wang YM, Guo LX, Ouyang JH, Zhou Y, Jia DC (2009) Interface adhesion properties of functional coatings on titanium alloy formed by microarc oxidation method. Appl Surf Sci 255(15):6875–688010.1016/j.apsusc.2009.03.007 ↗
12. Zhang X, Wang H, Li J, He X, Hang R, Huang X, Tian L, Tang B (2016) Corrosion behavior of Zn-incorporated antibacterial TiO2 porous coating on titanium. Ceram Int 42(15):17095–1710010.1016/j.ceramint.2016.07.220 ↗
13. Bayati MR, Moshfegh AZ, Golestani-Fard F (2010) Effect of electrical parameters on morphology, chemical composition, and photoactivity of the nano-porous titania layers synthesized by pulse-microarc oxidation. Electrochim Acta 55(8):2760–276610.1016/j.electacta.2009.12.043 ↗
14. Zhang XP, Zhao ZP, Wu FM, Wang YL, Wu J (2007) Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank’s solution. J Mater Sci 42(20):8523–8528. https://doi.org/10.1007/s10853-007-1738-z10.1007/s10853-007-1738-z ↗
15. Malyshev VN, Zorin KM (2007) Features of microarc oxidation coatings formation technology in slurry electrolytes. Appl Surf Sci 254(5):1511–151610.1016/j.apsusc.2007.07.079 ↗
16. Wang YH, Liu ZG, Ouyang JH, Wang YM, Zhou Y (2015) Influence of electrolyte compositions on structure and high-temperature oxidation resistance of microarc oxidation coatings formed on Ti2AlNb alloy. J Alloy Compd 647:431–43710.1016/j.jallcom.2015.05.154 ↗
17. Lin X, Wang X, Tan L, Wan P, Yu X, Li Q, Yang K (2014) Effect of preparation parameters on the properties of hydroxyapatite containing micro-arc oxidation coating on biodegradable ZK60 magnesium alloy. Ceram Int 40(7):10043–1005110.1016/j.ceramint.2014.02.104 ↗