journal article·2000-08

Hydrogen reduction of a RuO2 electrode prepared by DC reactive sputtering

Y. Matsui, M. Hiratani, S. Kimura

Journal of Materials Science· Volume 35· Issue 16
Publisher page

Abstract

RuO2 thin films deposited by reactive DC sputtering were heat-treated in a 0.3%-H2 atmosphere at 200°C in order to investigate the reduction property of RuO2. The films were selectively reduced (starting from the interface) because of insufficient oxidation. When the as-deposited RuO2/Si structure was hydrogen-reduced, the RuO2 film was broken into fragments because of poor mechanical strength. On the other hand, the RuO2 film heat-treated once in O2 at 700°C cracked into a star shape as a result of vapor generation and volume shrinkage. The star-shape cracking was still observed even when the RuO2 film was covered with a 90-nm-thick BST film. The mechanical strength and the adhesion of RuO2 were improved to some extent by post-oxidation at high temperatures. However, a way to prevent the morphological destruction could not be found because of the thermodynamic equilibrium during the hydrogen reduction process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. M. L. Green, M. E. Gross, L. E. Papa, K. J. Schnoes and D. BRasen, J. Electrochem. Soc. 132 (1985) 2677.10.1149/1.2113647 ↗
2. Q. X. Jia, X. D. Wu, S. R. Foltyn, A. T. Findikoglu, P. Tiwari, J. P. Zheng and T. R. Jow, Appl. Phys. Lett. 67 (1995) 1677.10.1063/1.115054 ↗
3. J. S. Lee, H. J. Kwon, Y. W. Jeong, H. H. Kim and C. Y. Kim, J. Mater. Res. 11 (1996) 2681.10.1557/JMR.1996.0337 ↗
4. A. Grill, W. Kane, J. Viggiano, M. Brady and R. Laibowitz, ibid. 7 (1992) 3260.10.1557/JMR.1992.3260 ↗
5. E. Kolawa, F. C. T. So, E. T.-S. Pan and M.-A. Nicolet, Appl. Phys. Lett. 50 (1987) 854.10.1063/1.98012 ↗
6. L. K.-Elbaum and M. Wittmer and D. S. Yee, ibid. 50 (1987) 1879.10.1063/1.97673 ↗
7. S. Saito and K. Kuramasu, Jpn. J. Appl. Phys. 31 (1992) 135.10.1143/JJAP.31.135 ↗
8. K. Tokashiki, K. Sato, K. Takemura, S. Yamamichi, P.-Y. Lesaicherre, H. Miyamoto, E. Ikawa and Y. Miyasaka, in Proc. 15th Symp. Dry Process, Tokyo, 1994 (Institute of Electrical Engineers of Japan, Tokyo, 1994) p. 73.
9. K. Takemura, H. Yamaguchi, P.-Y. Lesaicherre, K. Tokashiki, H. Miyamoto, H. Ono, Y. Miyasaka and M. Yoshida, Jpn. J. Appl. Phys. 34 (1995) 5224.10.1143/JJAP.34.5224 ↗
10. Y. T. Kim and C. W. Lee, ibid. 35 (1996) 6153.10.1143/JJAP.35.6153 ↗
11. J.-H. Ahn, W.-Y. Choi, W.-J. Lee and H.-G. Kim, ibid. 37 (1998) 284.10.1143/JJAP.37.284 ↗
12. W. F. McClune (ed.), “Powder Diffraction File” (JCPDS, Swarthmore, 1985).
13. J. A. Rard, Chemical Reviews 85 (1985) 1.10.1021/cr00065a001 ↗