Effect of CO2 fixation reaction on the thermal and dynamic mechanical properties of tetrafunctional epoxy resin
Source abstract
Abstract
A tetrafunctional epoxy resin was modified using CO2 fixation process in the presence of tetra-n-butyl ammonium bromide as catalyst. The unmodified tetrafunctional epoxy resin (UMTE) and CO2 fixated modified tetrafunctional epoxy resin (CFMTE) were cured by diethylenetriamine. A bifunctional glycidyl ether compound was used as a reactive diluent to control the viscosity of CFMTE. The activation energy of curing reaction was computed using the advanced integral isoconversional method. The activation energy, which depends on the conversion, was considerably changed due to the CO2 fixation process. The thermal stability parameters including the initial degradation temperature, the temperature at the maximum rate of weight loss (T max), and the decomposition activation energy (E d) were determined by thermal gravimetry. Dynamic mechanical thermal analysis measurements showed that the CO2 fixation decreases the T g of the epoxy resin. The surface morphology of UMTE and CFMTE were determined by scanning electron microscope. It is concluded that CO2 fixation reaction improves the properties of tetrafunctional epoxy resin.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon dioxide utilization in catalysis · Epoxy Resin Curing Processes · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Bhatnagar MS (1996) The polymeric materials encyclopedia, 1st edn. CRC Press, Boca Raton
2. Mark HF (2004) Encyclopedia of polymer science and technology, 3rd edn. John Wiley & Sons
3. Li AJ, Ren MS, Bai RC et al (2013) Thermal stabilities and mechanical properties of two tetra-functional epoxy resins. Appl Mech Mater 284:245–249
4. Aresta M (2010) Carbon dioxide as chemical feedstock, 1st edn. Wiley, Germany10.1002/9783527629916 ↗
5. Caló V, Nacci A, Monopoli A, Fanizzi A (2002) Cyclic carbonate formation from carbon dioxide and oxiranes in tetrabutylammonium halides as solvents and catalysts. Org Lett 4:2561–256310.1021/ol026189w ↗
6. Kihara N, Hara N, Endo T (1993) Catalytic activity of various salts in the reaction of 2,3-epoxypropyl phenyl ether and carbon dioxide under atmospheric pressure. J Org Chem 58:6198–620210.1021/jo00075a011 ↗
7. Yoshida M, Ihara M (2004) Novel methodologies for the synthesis of cyclic carbonates. Chem Eur J 10:2886–289310.1002/chem.200305583 ↗
8. Yu T, Weiss RG (2012) Syntheses of cyclic carbonates with amidinium halide catalysts in reusable, reversible, room-temperature ionic liquids or acetonitrile. Green Chem 14:209–21610.1039/C1GC16027C ↗
9. Zhu A, Jiang T, Han B et al (2007) Supported choline chloride/urea as a heterogeneous catalyst for chemical fixation of carbon dioxide to cyclic carbonates. Green Chem 9:169–17210.1039/B612164K ↗
10. Park DW, Mun NY, Ju HY, Choe Y, Park SW (2006) Synthesis of polycarbonates by copolymerization of carbon dioxide and glycidyl methacrylate using ionic liquids. Stud Surf Sci Catal 159:865–86810.1016/S0167-2991(06)81734-9 ↗
11. Ghazali-Esfahani S, Song H, Bobbink FD, Laurenczy G et al (2013) Cycloaddition of CO2 to epoxides catalyzed by imidazolium-based polymeric ionic liquids. Green Chem 15:1584–158910.1039/c3gc37085b ↗
12. Takahashi T, Watahiki T, Kitazume S, Yasuda H, Sakakura T (2006) Synergistic hybrid catalyst for cyclic carbonate synthesis: remarkable acceleration caused by immobilization of homogeneous catalyst on silica. Chem Commun 15:1664–166610.1039/b517140g ↗
13. Tian S, Miao CX, Wang JQ et al (2007) Efficient synthesis of dimethyl carbonate from methanol, propylene oxide and CO2 catalyzed by recyclable inorganic base/phosphonium halide-functionalized polyethylene glycol. Green Chem 9:566–56710.1039/B614259A ↗
14. Sakai T, Tsutsumi Y, Ema T (2008) Highly active and robust organic–inorganic hybrid catalyst for the synthesis of cyclic carbonates from carbon dioxide and epoxides. Green Chem 10:337–34110.1039/b718321f ↗
15. Bai D, Wang X, Song Y et al (2010) Bifunctional metalloporphyrins-catalyzed coupling reaction of epoxides and CO2 to cyclic carbonates. Chin J Catal 31:176–18010.1016/S1872-2067(09)60044-9 ↗
16. Watile RA, Deshmukh KM, Dhake KP, Bhanage BM (2012) Efficient synthesis of cyclic carbonate from carbon dioxide using polymer anchored diol functionalized ionic liquids as a highly active heterogeneous catalyst. Catal Sci Technol 2:1051–105510.1039/c2cy00458e ↗
17. Rokicki G, Wojciechowski C (1990) Epoxy resin modified by aliphatic cyclic carbonate. J Appl Polym Sci 41:647–65910.1002/app.1990.070410315 ↗
18. Rokicki G, Lewandowski M (1987) Epoxy resins modified by carbon dioxide. Die Angew Makromol Chemie 148:53–6610.1002/apmc.1987.051480105 ↗
19. Jin FL, Park SJ (2009) Thermal stability of trifunctional epoxy resins modified with nanosized calcium carbonate. Bull Korean Chem Soc 30(334–338):2009
20. Friedman HL (1964) Kinetics of thermal degradation of char-forming plastics from thermogravimetry, application to a phenolic plastic. J Polym Sci C 6:183–19510.1002/polc.5070060121 ↗
21. Ozawa T (1992) Estimation of activation energy by isoconversion methods. Thermochim Acta 203:159–16510.1016/0040-6031(92)85192-X ↗
22. Starink MJ (2003) The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochim Acta 404:163–17610.1016/S0040-6031(03)00144-8 ↗
23. Vyazovkin S, Sbirrazzuoli N (2006) Isoconversional kinetic analysis of thermally stimulated processes in polymers. Macromol Rapid Commun 27:1515–153210.1002/marc.200600404 ↗
24. Vyazovkin S, Burnham AK, Criado JM et al (2011) ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta 520:1–1910.1016/j.tca.2011.03.034 ↗
25. Vyazovkin S, Dollimore D (1996) Linear and nonlinear procedures in isoconversional computations of the activation energy on nonisothermal reactions in solides. J Chem Inf Comput Sci 36:42–4510.1021/ci950062m ↗
26. Vyazovkin S (1997) Evaluation of activation energy of thermally stimulated solid-state reactions under arbitrary variation of temperature. J Comput Chem 18:393–40210.1002/(SICI)1096-987X(199702)18:3<393::AID-JCC9>3.0.CO;2-P ↗
27. Zhang Y, Vyazovkin S (2005) Curing of diglycidyl ether 4,4′-bisphenol P with nitro derivatives of amine compounds, 3 2,4-dinitroaniline. Macromol Chem Phys 206:1840–184610.1002/macp.200500209 ↗
28. Kawahara S, Saito T (2006) Preparation of carbonated natural rubber. J Polym Sci A 44:1561–156710.1002/pola.21282 ↗
29. Ma J, Ren JH et al (2005) A new approach to polymer/montmorillonite nanocomposites. Polymer 44:4619–462410.1016/S0032-3861(03)00362-8 ↗
30. Ochiai B, Matsuki M, Nagai D, Miyagawa T, Endo T (2005) Radical polymerization behavior of a vinyl monomer bearing five membered cyclic carbonate structure and reactions of the obtained polymers with amines. J Polym Sci A 43:584–59210.1002/pola.20557 ↗
31. Lee JY, Lee HK (2004) Characterization of organobentonite used for polymer nanocomposites. Mater Chem Phys 85:410–41510.1016/j.matchemphys.2004.01.032 ↗