Poly(vinylpyrrolidone) as dispersing agent for cerium-gadolinium oxide (CGO) suspensions
Source abstract
Abstract
The behaviour of selected poly(vinylpyrrolidone) grades to act as dispersant for ethanol-based cerium-gadolinium oxide suspensions was investigated and related to the molecular weight characteristics. The number, weight, and z-average molecular weights M n, M w, and M z were determined by gel permeation chromatography and then used in a numerical method to evaluate the viscosity average molecular weight (M v) via an empirically modified Mark–Houwink–Sakurada (MHS) equation. The MHS equation parameters (a and K) and the polydispersity correction factor (q MHS) were also evaluated. Three grades with different molecular weight features were selected and further studied as dispersants by means of rheology. Despite the differences, only slight shifts in the amount of polymer required for achieving fully stabilized dispersions were observed, whereas comparable packing properties were obtained. This was explained as an effect of the polydispersity, expressed as q MHS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Tavlarakis P, Urban JJ, Snow N (2011) Determination of total polyvinylpyrrolidone (PVP) in ophthalmic solutions by size exclusion chromatography with ultraviolet-visible detection. J Chromatogr Sci 49:457–46210.1093/chrsci/49.6.457 ↗
2. Gregorova A, Saha N, Kitano T, Saha P (2015) Hydrothermal effect and mechanical stress properties of carboxymethylcellulose based hydrogel food packaging. Carbohydr Polym 117:559–56810.1016/j.carbpol.2014.10.009 ↗
3. Pattanaik M, Bhaumik SK (2000) Adsorption behaviour of polyvinyl pyrrolidone on oxide surfaces. Mater Lett 44:352–36010.1016/S0167-577X(00)00058-6 ↗
4. Khamforoush M, Pirouzram O, Hatami T (2015) The evaluation of thin film composite membrane composed of an electrospun polyacrylonitrile nanofibrous mid-layer for separating oil–water mixture. Desalination 359:14–2110.1016/j.desal.2014.12.016 ↗
5. Esposito V, Gadea C, Hjelm J, Marani D, Hu Q, Agersted K, Ramousse S, Højgaard JS (2015) Fabrication of thin yttria-stabilized-zirconia dense electrolyte layers by inkjet printing for high performing solid oxide fuel cells. J Power Sources 273:89–9510.1016/j.jpowsour.2014.09.085 ↗
6. Aslan M, Weingartha D, Jackel N, Atchison JS, Grobelseka I, Presser V (2014) Polyvinylpyrrolidone as binder for castable supercapacitor electrodes with high electrochemical performance in organic electrolytes. J Power Sources 266:374–38310.1016/j.jpowsour.2014.05.031 ↗
7. Acosta M, Wiesner VL, Martinez CJ, Trice RW, Youngblood JP (2013) Effect of polyvinylpyrrolidone additions on the rheology of aqueous, highly loaded alumina suspensions. J Am Ceram Soc 96:1372–138210.1111/jace.12277 ↗
8. Ni DW, Schmidt CG, Teocoli F, Kaiser A, Andersen KB, Ramousse S, Esposito V (2013) Densification and grain growth during sintering of porous Ce0.9Gd0.1O1.95 tape cast layers: a comprehensive study on heuristic methods. J Eur Ceram Soc 33:2529–253710.1016/j.jeurceramsoc.2013.03.025 ↗
9. Xiao C, Ni Q, Chen H, Guob L (2012) Effect of polyvinylpyrrolidone on rheology of aqueous SiC suspensions dispersed with poly(aspartic acid). Colloid Surf A 399:108–11110.1016/j.colsurfa.2012.02.046 ↗
10. Sivaiah K, Kumar KN, Naresh V, Buddhudu S (2011) Structural and optical properties of Li + : PVP & Ag + : PVP Polymer Films. Mater Sci Appl 2:1688–1696
11. Dana FS, Nguyen D-V, Kochhar JS, Liu X-Y, Kang L (2013) UV-curable pressure sensitive adhesive films: effects of biocompatible plasticizers on mechanical and adhesion properties. Soft Matter 9:6270–628110.1039/c3sm50879j ↗
12. Marani D, Sudireddy BR, Bentze JJ, Jørgensen PS, Kiebach R (2015) Colloidal stabilization of cerium-gadolinium oxide (CGO) suspensions via rheology. J Eur Ceram Soc 35:2823–283210.1016/j.jeurceramsoc.2015.03.043 ↗
13. De Riccardis MF, Martina V, Carbone D (2013) Study of polymer particles suspensions for electrophoretic deposition. J Phys Chem B 117:1592–159910.1021/jp3051752 ↗
14. Frank HP, Levy GB (1953) Determination of molecular weight of polyvinylpyrrolidone. J Polym Sci 10:371–37810.1002/pol.1953.120100402 ↗
15. Levy GB, Frank HP (1955) Determination of molecular weight of polyvinylpyrrolidone. II. J Polym Sci 17:247–25410.1002/pol.1955.120178408 ↗
16. Jones SA, Martin GP, Brown MB (2004) Determination of polyvinylpyrrolidone using high-performance liquid chromatography. J Pharma Biomed Anal 35:621–62410.1016/j.jpba.2004.01.024 ↗
17. Strelitzki R, Reed WF (1999) Automated batch characterization of polymer solutions by static light scattering and viscometry. J Appl Polym Sci 73:2359–236710.1002/(SICI)1097-4628(19990919)73:12<2359::AID-APP5>3.0.CO;2-H ↗
18. Knappe P, Bienert R, Weidner S, Thünemann AF (2010) Characterization of poly(N-vinyl-2-pyrrolidone)s with broad size distributions. Polymer 51:1723–172710.1016/j.polymer.2010.02.039 ↗
19. Marani D, Sudireddy BR, Kiebach R, Nielsen L, Ndoni S (2014) Rheological properties of poly (vinylpiyrrolidone) as a function of molecular weights. Annu Trans Nord Rheol Conf 22:11–18
20. Marani D, Hjelm J, Wandel M (2013) Use of Intrinsic Viscosity for Evaluation of Polymer-Solvent Affinity. Annu Trans Nord Rheol Soc. 21:255–261
21. Steele BCH (2000) Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500 °C. Solid State Ion 129:95–11010.1016/S0167-2738(99)00319-7 ↗
22. Glasscock JA, Esposito V, Foghmoes SPV, Stegk T, Matuschek D, Ley MWH, Ramousse S (2013) The effect of forming stresses on the sintering of ultrafine Ce0.9Gd0.1O2δ powders. J Eur Ceram Soc 33:1289–129610.1016/j.jeurceramsoc.2012.12.015 ↗
23. Kant KM, Esposito V, Pryds N (2012) Strain induced ionic conductivity enhancement in epitaxial Ce0.9Gd0.1O2δ thin films. Appl Phys Lett 100:03310510.1063/1.3676659 ↗
24. Ni DW, Esposito V, Foghmoes SPV, Ramousse S (2014) Densification and grain growth kinetics of Ce0.9Gd0.1O1.95 in tape cast layers: the influence of porosity. J Eur Ceram Soc 33:2371–2379
25. Somiya S (2013) Handbook of advanced ceramics: materials, applications, processing, and properties, 2nd edn. Elsevier, Waltham
26. Huggins M (1942) The viscosity of dilute solutions of long-chain molecules, IV. Dependence on concentration. J Am Chem Soc 64:2716–271810.1021/ja01263a056 ↗
27. Kraemer E (1938) Molecular weights of cellulose and cellulose derivative. Ind Eng Chem 30:1200–120310.1021/ie50346a023 ↗
28. Elias HG (1977) Macromolecules, vol 1. Wiley Intersience, New York10.1007/978-1-4615-7364-7 ↗
29. Guaita M, Chiantore O, Munari A, Maranesi P, Pilati F, Toselli M (1991) A General intrinsic viscosity-molecular weights relationship for linear polydisperse polymers-3. Applicability to the evaluation of the Mark-Houwink-Sakurada k and a constants. Eur Polymer J 27:385–38810.1016/0014-3057(91)90193-R ↗
30. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, Ithaca
31. Ma X, Pawlik M (2007) Intrinsic viscosities and Huggins constants of guar gum in alkali metal chloride solutions. Carbohydr Polym 70:15–2410.1016/j.carbpol.2007.02.024 ↗
32. Marani D, Hjelm J, Wandel W (2014) Rheological analysis of stabilized cerium-gadolinium oxide (CGO) dispersions. J Eur Ceram Soc 34:695–70210.1016/j.jeurceramsoc.2013.09.022 ↗
33. Dabak T, Yucel O (1986) Shear viscosity behaviour of highly concentrated suspensions at low and high shear rates. Rheol Acta 25(527–33):22
34. Baer AD (1971) Rheology of concentrated suspensions. J Appl Polym Sci 15:2007–202110.1002/app.1971.070150818 ↗
35. Krieger IM, Dougherty TJ (1972) Rheology of monodisperse lattices. Adv Colloid Interface Sci 3:111–13610.1016/0001-8686(72)80001-0 ↗
36. Macosko W (1994) Rheology, principles, measurements and applications. Wiley, NewYork