The isochronal δ → γ transformation of high Cr ferritic heat-resistant steel during cooling
Source abstract
Abstract
Thermal simulation technology was employed to investigate phase transformation in heat-affected zones (HAZ) of high Cr ferritic heat-resistant steel. The simulated continuous cooling transformation diagram was established based on the experimental results obtained from different cooling rates in the range of 0.02–60 °C/s. A theoretical model considering the site saturation nucleation at grain boundaries has been applied to calculate the austenite fraction as a function of cooling rate. It is found that both the austenite fraction and grain size decrease with the increase of cooling rates. The calculated results are mostly consistent with the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Mythili R, Thomas Paul V, Saroja S, Vijayalakshmi M, Raghunathan V (2003) J Nucl Mater 312:19910.1016/S0022-3115(02)01680-X ↗
2. Klueh R, Nelson A (2007) J Nucl Mater 371:3710.1016/j.jnucmat.2007.05.005 ↗
3. Jones W, Hills C, Polonis D (1991) Metal Mater Trans A 22:104910.1007/BF02661098 ↗
4. Hertzman S, Brolund B, Ferreira P (1997) Metall Mater Trans A 28:27710.1007/s11661-997-0130-6 ↗
5. Hemmer H, Grong (1999) Metall Mater Trans A 30:291510.1007/s11661-999-0129-2 ↗
6. Sieurin H, Sandstrm R (2006) Mater Sci Eng A 418:25010.1016/j.msea.2005.11.025 ↗
7. Zhang W, DebRoy T, Palmer T, Elmer J (2005) Acta Mater 53:444110.1016/j.actamat.2005.05.040 ↗
8. Zhang W, Elmer J, DebRoy T (2002) Scr Mater 46:75310.1016/S1359-6462(02)00040-4 ↗
9. Ferreira P, Hertzman S (1991) Proceedings of Duplex Stainless Steels ’91, vol 2, Beaune, p 959
10. Cahn JW (1956) Acta Metall 4:44910.1016/0001-6160(56)90041-4 ↗
11. Trivedi R, Pound G (1967) J Appl Phys 38:356910.1063/1.1710174 ↗
12. Finkler H, Schirra M (1996) Steel Res 67:32810.1002/srin.199605498 ↗
13. George G, Shaikh H, Parvathavarthini N, George R, Khatak H (2001) J Mater Eng Perform 10:46010.1361/105994901770344890 ↗
14. Patriarca P, Harkness S, Duke J, Cooper L (1976) Nucl Technol 28:516
15. Maehara Y, Ohmori Y (1987) Metall Mater Trans A 18:66310.1007/BF02649482 ↗
16. Lee K, Cho H, Choi D (1999) J Alloys Compd 285:15610.1016/S0925-8388(99)00014-6 ↗
17. Jimenez J, Carsi M, Ruano O, Penalba F (2000) J Mater Sci 35:907. doi: https://doi.org/10.1023/A:100475042489710.1023/A:1004750424897 ↗
18. Liu F, Sommer F, Bos C, Mittemeijer E (2007) Int Mater Rev 52:19310.1179/174328007X160308 ↗