Recycling of magnesium alloy AZ91 scrap by a B2O3-containing flux
Source abstract
Abstract
A new flux was developed specially for recycling of scrap magnesium alloy AZ91 with high iron content. JDMJ in the flux could effectively remove inclusions from the recycled magnesium alloy and its proper addition was about 2.0 wt%. Excessive addition of the flux would result in flux inclusion in the recycled magnesium alloy. B2O3 in the flux made the iron concentration in the scrap magnesium alloy decrease from 0.044 wt% to about 0.002 wt% during recycling and its optimal addition was 0.3 wt% by Gaussian Fitting. The tensile properties of the recycled magnesium alloy were greatly improved by about 35%. Weight loss measurement, potentiodynamic study and pitting morphology examination revealed that the corrosion resistance of the recycled magnesium alloy was also greatly improved. The mechanisms of inclusion removing and iron reducing in the scrap magnesium alloy during recycling were discussed thermodynamically and formation of FeB was confirmed as the main reason for iron reducing in the recycled magnesium alloy AZ91 by XRD analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. C. B. JOSEPH, Light Metal Age 59(8) (2001) 103.
2. H. FURUYA, N. KOGISO, S. MATUNAGA and K. SENDA, Mater. Sci. Forum 350 (2000) 341.10.4028/www.scientific.net/MSF.350-351.341 ↗
3. E. B. ROBERT, Light Metal Age 54(9/10) (1996) 66.
4. R. BROWN, ibid. 58(9/10) (2000) 54.
5. R. P. PAWLEK and R. B. BROWN, ibid. 59(8) (2001) 50.
6. E. B. ROBERT, ibid. 61(1/2) (2003) 53.
7. T. HAITANI, Y. TAMURA, T. MOTEGI, N. KONO and H. TAMEHIRO, Mater. Sci. Forum 419–422 (2003) 697.
8. J. D. HANAWALT, Transaction AIME 147 (1942) 279.
9. M. INOUE, M. IWAI, K. MATUZAWA, S. KAMADO and Y. KOJIMA, J. Jpn. Inst. Light Met. 48(6) (1998) 257.10.2464/jilm.48.257 ↗
10. Y. CHINO, A. YAMAMOTO, H. IWASAKI, M. MABUCHI and H. TSUBAKINO, Mater. Sci. Forum 419–422 (2003) 671.10.4028/www.scientific.net/MSF.419-422.671 ↗
11. M. INOUE, M. IWAI, K. MATSUZAWA, S. KAMADO and Y. KOJIMA, ibid. 419–422 (2003) 691.10.4028/www.scientific.net/MSF.419-422.691 ↗
12. M. INOUE, M. IWAI, S. KAMADO, Y. KOJIMA, T. ITOH and M. SUGAMA, Trans. Mater. Res. Soc. Jpn. 24 (1999) 349.
13. K. KOICHI, N. KOUTA and K. MOTONOBU, Mater. Trans. 43 (2002) 2516.10.2320/matertrans.43.2516 ↗
14. C. ZHAI, W. DING, X. XU, Z. DENG and Z. YU, Spec. Cast. Nonferr. Alloys 4 (1997) 48.
15. G. H. ANDREW, A. M. BARRY and E. M. WILLIAM, Light Metal Age 54(7/8) (1996) 6.
16. H. HENRY and L. ALAN, JOM 10 (1996) 47.
17. B. S. TERRY and P. GRIEVESON, ISIJ International 33 (1993) 166.10.2355/isijinternational.33.166 ↗
18. R. XU, "Magnesium Metallurgy" (Chinese) (Metallurgy Industry Press, Beijing, 1993) p. 257.
19. X. ZENG, Q. WANG and W. DING, Light Alloy Proc. Techn. 27 (1999) 5.
20. Y. LINAG, Y. CHE and X. LIU, "Handbook of Inorganic Thermodynamic Data" (North-East University Press, Shenyang, 1993) p. 458.
21. E. T. TURKDOGAN, "Physical Chemistry of High Temperature Technology" (Academic Press, New York, 1980) p. 25.