Quantifying the surface roughness effect in microindentation using a proportional specimen resistance model
Source abstract
Abstract
The influence of the surface roughness on the indentation size effect in microindentation was examined using the proportional specimen resistance model. Stainless steel, aluminium, and copper surfaces were polished to different levels of roughness and subjected to microindentation. The results showed that the indentation size effect increases with increasing surface roughness, according to the proportional specimen resistance model. A normalized hardness equation H/H 0 = (c 0 + c 1 R a)/(a 2 d) + 1 was established, and the value of c 1 can be used to quantify the effect of surface roughness on the severity of the indentation size effect; this value was found to be highest for stainless steel, followed by copper and aluminium.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Syed Asif SA, Wahl KJ, Colton RJ (1999) J Mater Res 15:54610.1557/JMR.2000.0081 ↗
2. Fares C, Boukharouba T, Belouchrani MEA, Britah A, Abdelaziz MN (2009) Damage and fracture mechanics: Failure analysis of engineering materials and structures. Springer, Dordrecht, p 1
3. Petzow G (1999) Metallographic etching: techniques for metallography, ceramography, and plastography, 2nd edn. ASM, New York
4. Kim JY, Kang SK, Lee JJ, Jang JI, Lee YH, Kwon D (2007) Acta Mater 55:355510.1016/j.actamat.2007.02.006 ↗
5. Ridriguez R, Gutierrez I (2003) Mater Sci Eng A 361:37710.1016/S0921-5093(03)00563-X ↗
6. Liu Y, Ngan AHW (2001) Scripta Mater 44:23710.1016/S1359-6462(00)00598-4 ↗
7. Pathak S, Stojakovic D, Doherty R, Kalidindi SR (2009) J Mater Res 24:114210.1557/jmr.2009.0137 ↗
8. Tabor D (1951) The hardness of metals. England, Oxford
9. Iost A, Bigot R (1996) J Mater Sci 31:3573. doi: 10.1007_BF0036076410.1007/BF00360764 ↗
10. Pelletier H, Gauthier C, Schirrer R (2010) Wear 268:115710.1016/j.wear.2010.01.003 ↗
11. Nix WD, Gao H (1998) J Mech Phys Solids 46:41110.1016/S0022-5096(97)00086-0 ↗
12. Fleck NA, Muller GM, Ashby MF, Hutchinson JW (1994) Acta Metall Mater 42(2):47510.1016/0956-7151(94)90502-9 ↗
13. Syed A, Wahl KJ, Colton RJ (2000) J Mater Res 15:54610.1557/JMR.2000.0081 ↗
14. Marteau J, Mazeran PE, Bouvier S, Bigerelle M (2012) Strain 48:49110.1111/j.1475-1305.2012.00846.x ↗
15. Bo Y, Horst V (2005) Mater Sci Eng A 25:467
16. Petch NJ (1953) J Iron Steel Inst 174:25
17. Lee YH, Kwon D (2003) Scripta Mater 49(5):45910.1016/S1359-6462(03)00290-2 ↗
18. Karpenko YA, Akay A (2001) Trib Intl 34:53110.1016/S0301-679X(01)00044-5 ↗
19. Xu ZH, Agren J (2004) Phil Mag 84:236710.1080/14786430410001690015 ↗
20. Mata M, Alcalá J (2004) Mech Phys Solids 52:14510.1016/S0022-5096(03)00075-9 ↗
21. Li H, Ghost A, Han YH, Bradt RC (1993) J Mater Res 8(5):102810.1557/JMR.1993.1028 ↗
22. Shi H, Atkinson M (1990) J Mater Sci 25:2111. doi: 10.1007_BF0104577410.1007/BF01045774 ↗
23. McElhaney KW, Vlassak JJ, Nix WD (1998) J Mat Res 13:130010.1557/JMR.1998.0185 ↗
24. Pharr GM, Hertbert GE, Gao Y (2010) Rev Mater Res 40:27110.1146/annurev-matsci-070909-104456 ↗
25. Elmustafa AA, Stone DS (2003) J Mech Phys Solids 51:35710.1016/S0022-5096(02)00033-9 ↗
26. Meyer E (1908) Phys Z 9:66
27. Mukhopadhyay NK, Paufler P (2006) Int Mater Rev 51:20910.1179/174328006X102475 ↗
28. Hays C, Kendall EG (1973) Metallurgy 6:275
29. Li H, Bradt R (1993) J Mater Sci 28:917. doi: 10.1007_BF0040087410.1007/BF00400874 ↗
30. Li H, Han YH, Bradt RC (1994) J Mater Sci 29:5641. doi: 10.1007_BF0034995910.1007/BF00349959 ↗
31. Li N, Liu L, Zhang M (2009) J Mater Sci 44:3072. doi: 10.1007/s10853-009-3407-x10.1007/s10853-009-3407-x ↗
32. Sargent PM, Page TF (1978) Proc Br Ceram Soc 26:209
33. Ford IJ (1993) J Phys: Apply Phys 26:221910.1088/0022-3727/26/12/020 ↗
34. Begley MR, Hutchinson JW (1998) J Mech Phys Solids 46:204910.1016/S0022-5096(98)00018-0 ↗
35. Chicot D, Roudet F, Soom A, Lesage (2007) J Surf Eng 23:3210.1179/174329407X161573 ↗
36. Qian L, Li M, Zhou Z, Yang H, Shi X (2005) Surf Coat Technol 195:26410.1016/j.surfcoat.2004.07.108 ↗
37. Zong Z, Lou J, Adewoye OO, Elmustafa AA, Hammad F, Soboyejo WO (2006) Mater Sci Eng A 434:178. doi: 10.1016/j.msea.2006.06.137->10.1016/j.msea.2006.06.137 ↗
38. Ramamurty U, Jana S, Kawamura Y, Chattopadhyay K (2005) Acta Mater 53:705. doi: 10.1016/j.actamat.2004.10.02310.1016/j.actamat.2004.10.023 ↗
39. Sangwal K (2009) Cryst Res Technol 44:1019. doi: 10.1002/crat.20090038510.1002/crat.200900385 ↗
40. Graca S, Colaco R, Vilar R (2007) Surf Coat Technol 202:538. doi: 10.1016/j.surfcoat.2007.06.03110.1016/j.surfcoat.2007.06.031 ↗
41. Zhang H, Jing X, Subhash G, Laslo JK, Dowding RJ (2005) Acta Mater 53:3849. doi: 10.1016/j.actamat.2005.04.03610.1016/j.actamat.2005.04.036 ↗
42. Bobji MS, Biswas SK (1998) J Mater Res 13:3227. doi: 10.1557/JMR.1998.043810.1557/JMR.1998.0438 ↗
43. Guo WC, Rauchs G, Zhang WH, Ponthot JP (2010) J Comput Appl Math 234:218310.1016/j.cam.2009.08.072 ↗
44. Sangwal K, Kłos A (2005) Cryst Res Technol 40:42910.1002/crat.200410362 ↗
45. Bhushan B (2005) Nanotribology and nanomechanics: An introduction. Springer, Germany, p 77610.1007/3-540-28248-3 ↗
46. Greenwood JA, Williamson JBP (1966) Proc R Soc A 295:300. doi: 10.1098/rspa.1966.024210.1098/rspa.1966.0242 ↗
47. Nanda Kumar AK, Kannan MD, Jayakumar S, Rajam KS, Raju VS (2006) Surf Coat Tech 201:3253. doi: 10.1016/j.surfcoat.2006.06.05310.1016/j.surfcoat.2006.06.053 ↗
48. Marteau J, Bigerelle, Xia Y, Mazeran PE, Bouvier (2013) Tribol Int 59:15410.1016/j.triboint.2012.06.029 ↗
49. Bigerelle M, Giljean S, Mathia TG (2011) Tribol Int 44:6310.1016/j.triboint.2010.08.002 ↗
50. Chudoba T, Jennett NM (2008) J Phys D 41:110.1088/0022-3727/41/21/215407 ↗
51. Wang Z (2012) Influence of sample preparation on the indentation size effect and nanoindentation pop-in on nickel (Doctoral dissertation) University of Tennessee
52. Ma Z, Long S, Pan Y, Zhou Y (2008) J Appl Phys 103:043512-1
53. Voyiadjis G, Peters R (2010) Acta Mech 211:13110.1007/s00707-009-0222-z ↗
54. Graca S, Colaco R, Vilar R (2007) Surf Coat Technol 202(3):53810.1016/j.surfcoat.2007.06.031 ↗