Passive films on nanocomposite carbide coatings for electrical contact applications
Source abstract
Abstract
Nanocomposite transition metal carbide/amorphous carbon coatings (Me-C/a-C) deposited by magnetron sputtering have excellent electrical contact properties. The contact resistance can be as low as that of noble metal coatings, although it is known to vary by several orders of magnitude depending on the deposition conditions. We have investigated a nanocrystalline niobium carbide/amorphous carbon (NbC x /a-C:H) model system aiming to clarify factors affecting the contact resistance for this group of contact materials. For the first time, the surface chemistry is systematically studied, by angle-resolved X-ray photoelectron spectroscopy, and in extension how it can explain the contact resistance. The coatings presented a mean oxide thickness of about 1 nm, which could be grown to 8 nm by annealing. Remarkably, the contact resistances covered four orders of magnitude and were found to be exponentially dependent on the mean oxide thickness. Moreover, there is an optimum in the amount of a-C:H phase where the contact resistance drops very significantly and it is thus important to not only consider the mean oxide thickness. To explain the results, a model relying on surface chemistry and contact mechanics is presented. The lowest contact resistance of a nanocomposite matched that of a gold coating at 1 N load (vs. gold), and such performance has previously not been demonstrated for similar nanocomposite materials, highlighting their useful properties for electrical contact applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Lewin E, Wilhelmsson O, Jansson U (2006) Nanocomposite nc-TiC/a-C thin films for electrical contact applications. J Appl Phys 100:54303. doi: 10.1063/1.233630210.1063/1.2336302 ↗
2. Lewin E, Olsson E, André B, Joelsson T, Öberg Å, Wiklund U, Ljungcrantz H, Jansson U (2009) Industrialisation study of nanocomposite nc-TiC/a-C coatings for electrical contact applications. Plasma Process Polym 6:S928–S934. doi: 10.1002/ppap.20093230310.1002/ppap.200932303 ↗
3. Nygren K, Samuelsson M, Flink A, Ljungcrantz H, Kassman Rudolphi Å, Jansson U (2014) Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications. Surf Coat Technol 260:326–334. doi: 10.1016/j.surfcoat.2014.06.06910.1016/j.surfcoat.2014.06.069 ↗
4. Nedfors N, Tengstrand O, Lewin E, Furlan A, Eklund P, Hultman L, Jansson U (2011) Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering. Surf Coat Technol 206:354–359. doi: 10.1016/j.surfcoat.2011.07.02110.1016/j.surfcoat.2011.07.021 ↗
5. Nedfors N, Tengstrand O, Flink A, Andersson AM, Eklund P, Hultman L, Jansson U (2014) Reactive sputtering of NbCx-based nanocomposite coatings: an up-scaling study. Surf Coat Technol 253:100–108. doi: 10.1016/j.surfcoat.2014.05.02110.1016/j.surfcoat.2014.05.021 ↗
6. Lewin E (2009) Design of carbide-based nanocomposite coatings. Acta Universitatis Upsaliensis
7. Öberg Å, Kassman Å, André B, Wiklund U, Lindquist M, Lewin E, Jansson U, Högberg H, Joelsson T, Ljungcrantz H (2009) Conductive nanocomposite ceramics as tribological and electrical contact materials. Eur Phys J Appl Phys 49:22902. doi: 10.1051/epjap/200912210.1051/epjap/2009122 ↗
8. Eklund P, Emmerlich J, Högberg H, Wilhelmsson O, Isberg P, Birch J, Persson POA, Jansson U, Hultman L (2005) Structural, electrical, and mechanical properties of nc-TiC/a-SiC nanocomposite thin films. J Vac Sci Technol B Microelectron Nanometer Struct 23:2486. doi: 10.1116/1.213108110.1116/1.2131081 ↗
9. Slade PG (2013) Electrical contacts: principles and applications, 2nd edn. Taylor & Francis, Abingdon
10. Greenwood JA (1966) Constriction resistance and the real area of contact. Br J Appl Phys 17:1621–1632. doi: 10.1088/0508-3443/17/12/31010.1088/0508-3443/17/12/310 ↗
11. Sawada S, Shimizu K, Shimada S, Hattori Y (2010) Prediction of electrical contact resistance of tin-plated and silver-plated terminals. SEI Tech Rev 71:37–43
12. Zhang P, Lau YY, Tang W, Gomez MR, French DM, Zier JC, Gilgenbach RM (2011) Contact resistance with dissimilar materials: bulk contacts and thin film contacts. IEEE Holm Conf Electr Contacts. doi: 10.1109/HOLM.2011.603477710.1109/HOLM.2011.6034777 ↗
13. Mercier D, Mandrillon V, Holtz A, Volpi F, Verdier M, Bréchet Y (2012) Quantitative evolution of electrical contact resistance between aluminum thin films. IEEE Holm Conf Electr Contacts. doi: 10.1109/HOLM.2012.633655010.1109/HOLM.2012.6336550 ↗
14. Timsit RS (1999) Electrical contact resistance: properties of stationary interfaces. IEEE Trans Compon Packag Technol 22:85–98. doi: 10.1109/6144.75935710.1109/6144.759357 ↗
15. Charitidis CA (2010) Nanomechanical and nanotribological properties of carbon-based thin films: a review. Int J Refract Met Hard Mater 28:51–70. doi: 10.1016/j.ijrmhm.2009.08.00310.1016/j.ijrmhm.2009.08.003 ↗
16. Leyland A, Matthews A (2004) Design criteria for wear-resistant nanostructured and glassy-metal coatings. Surf Coat Technol 177–178:317–324. doi: 10.1016/j.surfcoat.2003.09.01110.1016/j.surfcoat.2003.09.011 ↗
17. Cao Y, Allameh S, Nankivil D, Sethiaraj S, Otiti T, Soboyejo W (2006) Nanoindentation measurements of the mechanical properties of polycrystalline Au and Ag thin films on silicon substrates: effects of grain size and film thickness. Mater Sci Eng A 427:232–240. doi: 10.1016/j.msea.2006.04.08010.1016/j.msea.2006.04.080 ↗
18. Leyland A, Matthews A (2000) On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear 246:1–11. doi: 10.1016/S0043-1648(00)00488-910.1016/S0043-1648(00)00488-9 ↗
19. Eklund P, Virojanadara C, Emmerlich J, Johansson LI, Högberg H, Hultman L (2006) Photoemission studies of Ti3SiC2 and nanocrystalline-TiC/amorphous-SiC nanocomposite thin films. Phys Rev B 74:45417. doi: 10.1103/PhysRevB.74.04541710.1103/PhysRevB.74.045417 ↗
20. Williamson GK, Hall WH (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–31. doi: 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
21. Díaz J, Paolicelli G, Ferrer S, Comin F (1996) Separation of the sp3 and sp2 components in the C1s photoemission spectra of amorphous carbon films. Phys Rev B 54:8064–8069. doi: 10.1103/PhysRevB.54.806410.1103/PhysRevB.54.8064 ↗
22. Hueso JL, Espinós JP, Caballero A, Cotrino J, González-Elipe AR (2007) XPS investigation of the reaction of carbon with NO, O2, N2 and H2O plasmas. Carbon 45:89–96. doi: 10.1016/j.carbon.2006.07.02110.1016/j.carbon.2006.07.021 ↗
23. Boehm HP (2002) Surface oxides on carbon and their analysis: a critical assessment. Carbon 40:145–149. doi: 10.1016/S0008-6223(01)00165-810.1016/S0008-6223(01)00165-8 ↗
24. Halbritter J, Darlinski A (1987) Angle resolved XPS studies of oxides at Nb-, NbN-, NbC- and Nb3Sn surfaces. IEEE Trans Magn 23:1381–1384. doi: 10.1109/TMAG.1987.106507910.1109/TMAG.1987.1065079 ↗
25. Seah MP, Dench WA (1979) Quantitative electron spectroscopy of surfaces: a standard data base for electron inelastic mean free paths in solids. Surf Interface Anal 1:2–11. doi: 10.1002/sia.74001010310.1002/sia.740010103 ↗
26. Straumanis ME, Zyszczynski S (1970) Lattice parameters, thermal expansion coefficients and densities of Nb, and of solid solutions Nb–O and Nb–N–O and their defect structure. J Appl Crystallogr 3:1–6. doi: 10.1107/S002188987000554X10.1107/S002188987000554X ↗
27. Onoprienko AA, Ivashchenko VI, Timofeeva II, Sinelnitchenko AК, Butenko OA (2016) Experimental and theoretical investigation of Nb–Si–C films. Surf Coat Technol 300:35–41. doi: 10.1016/j.surfcoat.2016.05.00710.1016/j.surfcoat.2016.05.007 ↗
28. Jansson U, Lewin E (2013) Sputter deposition of transition-metal carbide films—a critical review from a chemical perspective. Thin Solid Films 536:1–24. doi: 10.1016/j.tsf.2013.02.01910.1016/j.tsf.2013.02.019 ↗
29. Zhang K, Wen M, Meng QN, Hu CQ, Li X, Liu C, Zheng WT (2012) Effects of substrate bias voltage on the microstructure, mechanical properties and tribological behavior of reactive sputtered niobium carbide films. Surf Coat Technol 212:185–191. doi: 10.1016/j.surfcoat.2012.09.04610.1016/j.surfcoat.2012.09.046 ↗
30. Storms EK, Krikorian NH (1959) The variation of lattice parameter with carbon content of niobium carbide. J Phys Chem 63:1747–1749. doi: 10.1021/j150580a04210.1021/j150580a042 ↗
31. Lewin E, Råsander M, Klintenberg M, Bergman A, Eriksson O, Jansson U (2010) Design of the lattice parameter of embedded nanoparticles. Chem Phys Lett 496:95–99. doi: 10.1016/j.cplett.2010.07.01310.1016/j.cplett.2010.07.013 ↗
32. Zehnder T, Schwaller P, Munnik F, Mikhailov S, Patscheider J (2004) Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering. J Appl Phys 95:4327. doi: 10.1063/1.165089810.1063/1.1650898 ↗
33. Ferrari AA, Kleinsorge B, Adamopoulos G, Robertson J, Milne W, Stolojan V, Brown L, LiBassi A, Tanner B (2000) Determination of bonding in amorphous carbons by electron energy loss spectroscopy, Raman scattering and X-ray reflectivity. J Non Cryst Solids 266–269:765–768. doi: 10.1016/S0022-3093(00)00035-110.1016/S0022-3093(00)00035-1 ↗
34. Grundner M, Halbritter J (1980) XPS and AES studies on oxide growth and oxide coatings on niobium. J Appl Phys 51:397–405. doi: 10.1063/1.32738610.1063/1.327386 ↗
35. Darlinski A, Halbritter J (1987) Angle-resolved XPS studies of oxides at NbN, NbC, and Nb surfaces. Surf Interface Anal 10:223–237. doi: 10.1002/sia.74010050210.1002/sia.740100502 ↗
36. Kuznetsov MV, Razinkin AS, Shalaeva EV (2009) Photoelectron spectroscopy and diffraction of surface nanoscale NbO/Nb(110) structures. J Struct Chem 50:514–521. doi: 10.1007/s10947-009-0079-y10.1007/s10947-009-0079-y ↗
37. Daccà A, Gemme G, Mattera L, Parodi R (1998) XPS analysis of the surface composition of niobium for superconducting RF cavities. Appl Surf Sci 126:219–230. doi: 10.1016/S0169-4332(97)00790-310.1016/S0169-4332(97)00790-3 ↗
38. Fadley CS (1984) Angle-resolved X-ray photoelectron spectroscopy. Prog Surf Sci 16:275–388. doi: 10.1016/0079-6816(84)90001-710.1016/0079-6816(84)90001-7 ↗
39. Tengstrand O, Nedfors N, Andersson M, Lu J, Jansson U, Flink A, Eklund P, Hultman L (2013) Beam-induced crystallization of amorphous Me–Si–C (Me = Nb or Zr) thin films during transmission electron microscopy. MRS Commun 3:151–155. doi: 10.1557/mrc.2013.3110.1557/mrc.2013.31 ↗
40. Greczynski G, Mráz S, Hultman L, Schneider JM (2016) Venting temperature determines surface chemistry of magnetron sputtered TiN films. Appl Phys Lett. doi: 10.1063/1.494097410.1063/1.4940974 ↗
41. Bayer BC, Bosworth DA, Michaelis FB, Blume R, Habler G, Abart R, Weatherup RS, Kidambi PR, Baumberg JJ, Knop-Gericke A, Schloegl R, Baehtz C, Barber ZH, Meyer JC, Hofmann S (2016) In situ observations of phase transitions in metastable nickel (carbide)/carbon nanocomposites. J Phys Chem C 120:22571–22584. doi: 10.1021/acs.jpcc.6b0155510.1021/acs.jpcc.6b01555 ↗
42. Shimada S (1994) A kinetic and thermoanalytical study on oxidation of powder and single-crystal samples of niobium carbide. Oxid Met 42:357–373. doi: 10.1007/BF0104675510.1007/BF01046755 ↗
43. Shi L, Gu Y, Chen L, Yang Z, Ma J, Qian Y (2005) Synthesis and oxidation behavior of nanocrystalline niobium carbide. Solid State Ion 176:841–843. doi: 10.1016/j.ssi.2004.11.00310.1016/j.ssi.2004.11.003 ↗
44. Allison CY, Modine FA, French RH (1987) Optical and electrical properties of niobium carbide. Phys Rev B 35:2573–2582. doi: 10.1103/PhysRevB.35.257310.1103/PhysRevB.35.2573 ↗
45. Abad MD, Sánchez-López JC, Cusnir N, Sanjines R (2009) WC/a-C nanocomposite thin films: optical and electrical properties. J Appl Phys 105:33510. doi: 10.1063/1.306071710.1063/1.3060717 ↗
46. Sedláčková K, Lobotka P, Vávra I, Radnóczi G (2005) Structural, electrical and magnetic properties of carbon–nickel composite thin films. Carbon 43:2192–2198. doi: 10.1016/j.carbon.2005.03.03510.1016/j.carbon.2005.03.035 ↗
47. Bozhko A, Takagi T, Takeno T, Shupegin M (2004) Electron transport in amorphous carbon-silicon nanocomposites containing Nb. Jpn J Appl Phys Part 1 43:7566–7571. doi: 10.1143/JJAP.43.756610.1143/JJAP.43.7566 ↗