Thermal stability of low-oxygen silicon carbide fibers (Hi-Nicalon) in carbon monoxide
Source abstract
Abstract
The effect of CO treatments on thermal stability of low-oxygen SiC fibers (Hi-Nicalon) was examined at 1273–1773 K using mass change measurements, X-ray diffraction (XRD) analysis, Auger electron spectroscopy (AES) analysis, resistivity measurements, scanning electron microscopy (SEM) observation and tensile tests. The fiber properties remained unchanged by heating below 1573 K. In addition to the grain growth of SiC, reduction of resistivity and degradation of strength above 1573 K, mass loss was observed above 1673 K. AES analysis showed carbon film formation on fiber surfaces at high temperature. The carbon film was formed by the following reaction:
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Silicon Carbide Semiconductor Technologies · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. T. Mah, N. L. Hecht, D. E. McCullum, J. R. Hoenigman, H. M. Kim, A. P. Kats and H. A. Lipsitt, J. Mater. Sci. 19 (1984) 1191.10.1007/BF01120029 ↗
2. Y. Maniette and A. Oberlin, ibid. 24 (1989) 3361.10.1007/BF01139066 ↗
3. M. H. Jaskowiak and J. A. Di. Carlo, J. Amer. Ceram. Soc. 74 (1989) 192.10.1111/j.1151-2916.1989.tb06100.x ↗
4. H.-E. Kim and A. J. Moorhead, ibid. 74 (1991) 666.10.1111/j.1151-2916.1991.tb04079.x ↗
5. T. Shimoo, H. Chen and K. Okamura, J. Ceram. Soc. Jpn. 100 (1992) 929.10.2109/jcersj.100.929 ↗
6. T. Shimoo, T. Hayatsu, M. Takeda, H. Ichikawa and K. Okamura, ibid. 102 (1994) 617.10.2109/jcersj.102.617 ↗
7. M. H. Berger, N. Hochet and A. R. Bunsell, J. Microsc. 177 (1995) 230.10.1111/j.1365-2818.1995.tb03554.x ↗
8. P. Le. Coustumer, M. Monthioux and A. Oberlin, Br. Ceram. Trans. 94 (1995) 177.
9. C. Vix-Guterl and P. Ehrburger, J. Mater. Sci. 31 (1996) 5363.10.1007/BF01159305 ↗
10. G. Chollon, R. E. Pailler, R. Naslain, F. Laanani, M. Monthioux and P. Olry, ibid. 32 (1997) 327.10.1023/A:1018541030308 ↗
11. G. Chollon, M. Czerniak, R. Pailler, X. Bourra, R. Naslain, J. P. Pillot and R. Cannet, ibid. 32 (1997) 893.10.1023/A:1018597432067 ↗
12. M. H. Berger, N. Hochet and A. R. Bunsell, J. Microsc. 185 (1997) 243.10.1046/j.1365-2818.1997.d01-620.x ↗
13. T. Shimoo, F. Toyoda and K. Okamura, J. Ceram. Soc. Jpn. 106 (1998) 447.10.2109/jcersj.106.447 ↗
14. Y. T. Zhu, S. T. Taylor, M. G. Stout, D. P. Butt and C. Lowe, J. Amer. Ceram. Soc. 81 (1998) 655.10.1111/j.1151-2916.1998.tb02386.x ↗
15. M. Takeda, J. Sakamoto, Y. Imai and H. Ichikawa, Composites Sci. and Tech. 59 (1999) 813.10.1016/S0266-3538(99)00012-3 ↗
16. T. Shimoo, F. Toyoda and K. Okamura, J. Mater. Sci. 35 (2000) 3301.10.1023/A:1004883607913 ↗
17. T. Shimoo, H. Takeuchi and K. Okamura, J. Ceram. Soc. Jpn. 108 (2000) 1096.10.2109/jcersj.108.1264_1096 ↗
18. T. Shimoo, Y. Morisada and K. Okamura, J. Amer. Ceram. Soc. 83 (2000) 3049.10.1111/j.1151-2916.2000.tb01681.x ↗
19. T. Shimoo, H. Takeuchi and K. Okamura, ibid. 84 (2001) 566.10.1111/j.1151-2916.2001.tb00699.x ↗
20. T. Shimoo, Y. Morisada and K. Okamura, J. Mater. Sci. 37 (2002) 1793.10.1023/A:1014945823031 ↗
21. T. Shimoo, H. Takeuchi and K. Okamura, ibid. 37 (2002) in printing.10.1023/A:1020608704120 ↗
22. T. Shimoo, Y. Morisada and K. Okamura, ibid. 37 (2002) in printing.10.1023/A:1014945823031 ↗
23. T. Shimoo, T. Morita and K. Okamura, J. Amer. Ceram. Soc. 84 (2001) 2975.10.1111/j.1151-2916.2001.tb01123.x ↗
24. Idem., J. Mater. Sci. 37 (2002) in printing.
25. G. S. Bibbo, P. M. Benson and C. G. Pantano, J. Mater. Sci. 26 (1991) 5075.10.1007/BF00549894 ↗
26. B. A. Bender, J. S. Wallace and D. J. Schrodt, J. Mater. Sci. Lett. 26 (1991) 970.
27. R. Bodet, N. Jia and R. E. Tressler, J. Eur. Ceram. Soc. 15 (1995) 997.10.1016/0955-2219(95)00074-5 ↗
28. M.-H. Berger, N. Hochet and A. R. Bunsell, in “Properties and Microstructures of Small-Diameter SiC-Based Fibers,” in “Fine Ceramic Fibers” edited by A. R. Bunsell and M.-H. Berger (Marcel Dekker, New York, 1999) p. 246.
29. G. Chollon, M. Szerniak, R. Pailler, X. Bourrat, R. Naslain, J. P. Pillot and R. Cannet, J. Mater. Sci. 32 (1997) 893.10.1023/A:1018597432067 ↗
30. E. T. Turkdogon, “Physical Chemistry of High Temperature Technology” (Academic Press, New York, 1980) p. 5.
31. T. Shimoo, F. Toyoda and K. Okamura, J. Amer. Ceram. Soc. 83 (2000) 1450.10.1111/j.1151-2916.2000.tb01409.x ↗
32. Idem., J. Mater. Sci. 35 (2000) 3811.10.1023/A:1004873128987 ↗