Influence of heat treatment on fatigue crack growth of austempered ductile iron
Source abstract
Abstract
Fatigue crack growth (FCG) behavior has been investigated for two different grades of austempered ductile irons (ADIs). These ADIs were produced from an alloyed ductile iron (DI) and heat treated respectively at two austempering temperatures, 300 and 360°C, to generate two different ausferrite microstructures. FCG tests using compact tension (CT) specimens were conducted under load control with three load ratios, R = 0.1, 0.5 and 0.7. The fatigue crack growth rates (FCGRs) of the given ADIs were compared with those of the as-cast DI with a bull's eye microstructure to examine the influence of austempering treatment on the FCG behavior of DI. The FCG behavior for the given materials was found to be dependent on the matrix structure with a demonstration that the as-cast DI had a better FCG resistance than did the ADIs at low Δ K regime and vice versa at high Δ K regime. As for the comparison made between the two ADIs, the one austempered at 360°C exhibited a lower FCG rate as a result of its coarse ausferrite microstructure, higher volume fraction of retained austenite, and greater toughness. The ADIs also demonstrated a load ratio dependence of intrinsic FCGR; that is, the enhancement of the FCGR with an increase in R value could not be rationalized by the crack closure effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Y. TANAKA and H. KAGE, Mater. Trans., JIM 33 (1992) 543.10.2320/matertrans1989.33.543 ↗
2. B. V. KOVACS, J. Heat Treat. 5 (1987) 55.10.1007/BF02831620 ↗
3. T. N. ROUNS, K. B. RUNDMAN and D. M. MOORE, AFS Trans. 92 (1984) 815.
4. B. V. KOVACS, ibid. 102 (1994) 417.
5. K. JOKIPII, in Proceedings of the First International Conference on ADI (American Society for Metals, 1984) p. 135.
6. S. YOSHINO, in Proceedings of the Second International Conference on ADI (ASME-Gear Research Institute, 1986) p. 337.
7. M. GRECH and J. M. YOUNG, AFS Trans. 98 (1990) 341.
8. G. P. FAUBERT, D. J. MOORE and K. B. RUNDMAN, ibid. 99 (1991) 563.
9. K. L. HAYRYNEN, D. J. MOORE and K. B. RUNDMAN, ibid. 100 (1992) 93.
10. K. P. JEN, J. WU and S. KIM, ibid. 100 (1992) 833.
11. L. BARTOSIEWICZ, A. R. KRAUSE, F. A. ALBERTS, I. SINGH and S. K. PUTATUNDA, Materials Characterization 30 (1993) 221.10.1016/1044-5803(93)90069-8 ↗
12. P. SHANMUGAN, P. P. RAO, K. R. UDUDA and N. VENKATARAMAN, J. Mater. Sci. 29 (1994) 4933.10.1007/BF00356546 ↗
13. M. BAHMANI, R. ELLIOTT and N. VARAHRAM, ibid. 32 (1997) 5383.10.1023/A:1018631314765 ↗
14. C.-K. LIN, P.-K. LAI and T.-S. SHIH, Int. J. Fatigue 18 (1996) 297.10.1016/0142-1123(96)82895-7 ↗
15. C.-K. LIN and J.-Y. WEI, Mater. Trans., JIM 38 (1997) 682.10.2320/matertrans1989.38.682 ↗
16. C.-K. LIN and W.-J. LEE, Int. J. Fatigue 20 (1998) 301.10.1016/S0142-1123(97)00134-5 ↗
17. C.-K. LIN and T.-P. HUNG, ibid. 18 (1996) 309.10.1016/0142-1123(95)00108-5 ↗
18. C.-K. LIN and C.-S. FU, Mater. Trans., JIM 38 (1997) 693.
19. J.-L. DOONG and S.-I. YU, Int. J. Fatigue 10 (1988) 219.10.1016/0142-1123(88)90002-3 ↗
20. L. BRTOSIEWICZ, A. R. KRAUSE, B. KOVACS and S. K. PUTATUNDA, AFS Trans. 100 (1992) 135.
21. G. L. GRENO, J. L. OTEGUI and R. E. BOERI, Int. J. Fatigue 21 (1999) 35.10.1016/S0142-1123(98)00055-3 ↗
22. C.-K. LINand Y.-L. PAI, ibid. 21 (1999) 45.10.1016/S0142-1123(98)00053-X ↗
23. K. TOKAJI, T. OGAWA and K. SHAMOTO, ibid. 16 (1994) 344.10.1016/0142-1123(94)90273-9 ↗
24. J. H. BULLOCH, Thr. Appl. Fract. Mech. 17 (1992) 19.10.1016/0167-8442(92)90044-X ↗
25. Z. K. FAN and R. E. SMALLMAN, Scripta Metall. et Mater. 31 (1994) 137.10.1016/0956-716X(94)90164-3 ↗
26. B. J. WENG, S. T. CHUNG, H. N. LIU and S. E. HSU, Chn. J. Mater. Sci. 23 (1991) 278 (in Chinese).