Microstructure and tensile properties of BN/SiC coated Hi-Nicalon, and Sylramic SiC fiber preforms
Source abstract
Abstract
Batch to batch and within batch variations, and the influence of fiber architecture on room temperature physical and tensile properties of BN/SiC coated Hi-Nicalon and Sylramic SiC fiber preform specimens were determined. The three fiber architectures studied were plain weave (PW), 5-harness satin (5HS) and 8-harness satin (8HS) Results indicate that the physical properties vary up to 10 percent within a batch, and up to 20 percent between batches of preforms. Load-reload (Hysteresis) and acoustic emission methods were used to analyze damage accumulation occurring during tensile loading. Early acoustic emission activity, before observable hysteretic behavior, indicates that the damage starts with the formation of nonbridged tunnel cracks. These cracks then propagate and intersect the load bearing "0" fibers giving rise to hysteretic behavior, For the Hi-Nicalon preform specimens, the onset of "0" bundle cracking stress and strain appeared to be independent of the fiber architecture. Also, the "0" fiber bundle cracking strain remained nearly the same for the preform specimens of both fiber types. Transmission Electron Microscope (TEM) analysis indicates that the Chemical Vapor Infiltration (CVI) Boron Nitride (BN) interface coating is mostly amorphous and contains carbon and oxygen impurities, and the CVI SiC coating is crystalline. No reaction exists between the CVI BN and SiC coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M. Johnson, B. J. Bartlett and W. A. Troha, in Proceedings of the 13th International Symposium on Air Breathing Engines, Chattanooga, Tennessee, U.S.A., 1997, Vol. II, edited by S. Billing, ISABE 97–7179, p. 1321.
2. D. Brewer, Mat.Sci.and Eng. A 261 (1999) 284.10.1016/S0921-5093(98)01079-X ↗
3. S. K. Lau, S. J. Calandra and R. W. Ohnsorg, US Patent no. 5,840,221 (1998).
4. J. P. Benedict, S. J. Klepeis and R. Anderson, in Proceedings: Microscopy and Microanalysis, Cleveland, Ohio (August 1997), Vol. 3. Part 2 (Springer-Verlag, New York) 339.10.1017/S1431927600008588 ↗
5. M. Takeda, Y. Imai, H. Ichikawa, T. Ishikawa, N. Kasai, T. Seguchi and K. Okamura, Ceram.Eng. Sci.Pro. 12 (1991) 1007.10.1002/9780470313831.ch7 ↗
6. J. Lipowitz, J. A. Rabe, A. Zangvil and Y. Xu, ibid.18 (1997) 147.10.1002/9780470294437.ch16 ↗
7. Engineering Property Data on Selected Ceramics Vol. 1, Nitrides, Report# MCIC-HB-07, Metals and Ceramics Information Center Battelle Institute, Columbus, OH (1976).
8. J. S. Goela, M. A. Pickering, R. L. Taylor, B. W. Murray and A. Lompado, Appl.Opt. 30 (1991) 3166.10.1364/AO.30.003166 ↗
9. W. J. Lacyey and T. L. Starr, in “Fiber-Reinforced Ceramic Composites: Materials, Processing, and Technology, ” edited by K. S. Mazdiyasni (Noyes Publications, Park Ridge, NJ, USA, 1990) p. 347.
10. P. J. Geoghegan, in “Flight-Vehicle Materials, Structure and Dynamics-Assessment and Future Directions, ” edited by A. H. Noor and S. L. Venneri (The American Society of Mechanical Engineers, New York, 1992) p. 113.
11. G. N. Morscher, J. Z. Gyekenyesi and R. T. Bhatt, in “Mechanical, Thermal, and Environmental Properties and Performance of Ceramic Composites and Components, ” ASTM STP 1392, edited by M. G. Jenkins, E. Lara-Curzio and S. T. Gonczy (American Society for Testing and Materials, West Conshohocken, PA, 2000) p. 306.
12. G. N. Morscher and J. Z. Gyekenesi, Ceram.Eng.Sci. Proc. 19(3) (1998) 241.
13. G. N. Morscher, Comp.Sci.Tech. 59(5) (1999) 687.10.1016/S0266-3538(98)00121-3 ↗
14. R. Y. Kim and N. J. Pagano, J.Amer.Ceram.Soc. 74(5) (1991) 1082.10.1111/j.1151-2916.1991.tb04346.x ↗
15. Y-J. Luo, S. C. Chang and I. M. Daniel, J.Comp.Mat. 29 (1995) 1946.10.1177/002199839502901501 ↗
16. B. N. Cox and D. B. Marshall, J.Amer.Ceram.Soc. 79(5) (1996) 1181.10.1111/j.1151-2916.1996.tb08570.x ↗
17. M. G. Jenkins, J. P. Piccola and E. Lara-Curzio, in “Fracture Mechanics of Ceramics, ” Vol. 12, edited by R. C. Bradt, D. P. H. Hasselman, D. Munz, M. Sakai and V. Y. Shevchenko (Plenum, New York, 1996) p. 267.10.1007/978-1-4615-5853-8_20 ↗
18. G. N. Morscher, in “Review of Progress in Quantitative Nondestructive Evaluation, ” Vol. 19, edited by D. O. Thompson and D. E. Chimenti (Kluwer Academic/Plenum Publishers) 19A (2000) p. 283.
19. L. Gulliaumat, Microfissuration des CMC: Relation avec la Microstructure et le Comportement Mecanique, Doctoral thesis Universite de Bordeaux I, 1994.
20. L. Gulliaumat and J. Lamon, Comp.Sci.Tech. 56 (1996) 803.10.1016/0266-3538(96)00024-3 ↗
21. P. Pluvinage, A. Parvizi-Majidi and T. W. Chou, J.Mater.Sci. 31 (1996) 232.10.1007/BF00355150 ↗