journal article·2012-02

Determination of local stress–strain properties of resistance spot-welded joints of advanced high-strength steels using the instrumented indentation test

Christian Ullner, Stephan Brauser, Andreas Subaric-Leitis, Gert Weber, Michael Rethmeier

Journal of Materials Science· Volume 47· Issue 3
Publisher page

Abstract

For spot-welded joints, the resistance to mechanical stress depends on the local strength properties and gradients in the weld area. The commonly used methods for investigating the stress–strain behaviour across the weld area are connected with a high level of sample preparation and with considerable limitations in local resolution. A promising method for determining locally resolved stress–strain curves is the instrumented indentation test in connection with the method of representative stress and strain (RS) and the method of artificial neural networks (NNs). The stress–strain properties of the weld nugget and the base metal determined by these two methods are compared and discussed, additionally in relation to the stress–strain curves obtained from the tensile test. The measured Vickers hardness across the weld area is compared with the evaluated local stress–strain properties. Three steels used in automobile manufacturing are investigated: mild steel DC04 and two advanced high-strength steels (TRIP steel HCT690T and martensitic steel HDT 1200M). The results of the two methods (RS and NN) show good correspondence for the base metal area but some significant differences for the weld nugget. Comparing the data across the weld area, no evidence of the presence of residual stress (which would influence the results) was found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Maggi S, Murgia M (2008) Weld Int 22:61010.1080/09507110802413001 ↗
2. Advanced High Strength Steel (AHSS) Application Guidelines Version 4.1 (2010) http://www.worldautosteel.org/Projects/AHSS-Guidelines.aspx . Accessed 13 April 2010
3. Weber G, Göklü S (2006) Welding in the World, 50, No 4/410.1007/BF03263453 ↗
4. Radakovic JD, Tumuluru MD (2008) In: Proceeding of the international sheet metal welding conference XIII
5. Chao YJ (2003) J Eng Mater Technol 125:12510.1115/1.1555648 ↗
6. Davidson JA (1983) In: SAE Technical Paper 830033. Society of Automotive Engineers, Warrendale, PA
7. Zhang J, Senkara H (2005) Resistance welding—fundamental and applications. CRC Press, Boca Raton, FL10.1201/b12507 ↗
8. Lin PC, Lin SH, Pan J (2006) Eng Fract Mech 73:222910.1016/j.engfracmech.2006.03.017 ↗
9. Kan YR (1976) Met Eng Q 16:26
10. Pan N, Sheppard S (2002) Int J Fat 24:51910.1016/S0142-1123(01)00157-8 ↗
11. Satoh T, Abe H, Nishikawa K, Morita M (1991) Trans Japan Weld Soc 22:46
12. Tao H, Tong W, Hector LG, Zavattieri PD (2007) J Mater Eng Perform 17:51710.1007/s11665-007-9170-8 ↗
13. Brauser S, Weber G, Rethmeier M (2011) Weld Cut 10:48
14. Zuniga SM, Sheppard SD (1995) Model Simul Mater Sci Eng 391:39110.1088/0965-0393/3/3/007 ↗
15. Lee H, Kim N, Lee T (2005) Eng Fract Mech 72:120310.1016/j.engfracmech.2004.07.013 ↗
16. Ambriz RR, Chicot D, Benseddiq N, Mesmacque G, de La Torre SD (2011) Eur J Mech A Solids 30:30710.1016/j.euromechsol.2010.12.007 ↗
17. Murty K (1999) Int J Press Vessels Pip 76:36110.1016/S0308-0161(99)00006-X ↗
18. Rao D, Heerens J, Alves Pinheiro G, dos Santos JF, Huber N (2010) Mater Sci Eng A 527:501810.1016/j.msea.2010.04.047 ↗
19. Kong X, Yang Q, Li B, Rothwell G, English R, Ren X (2008) Mater Des 29:155410.1016/j.matdes.2007.12.001 ↗
20. Tyulyukovskiy E, Huber N (2006) J Mater Res 21(3):66410.1557/jmr.2006.0076 ↗
21. EN ISO 14577 (2003) Metallic materials—instrumented indentation test for hardness and materials parameters, Part 1: test method, Part 2: verification and calibration of the testing devices, Part 3: calibration of reference blocks
22. ISO/TR 29381 (2008) Metallic materials—Measurement of mechanical properties by an instrumented indentation test—indentation tensile properties
23. Ahn JH, Kwon D (2001) J Mater Res 16(11):317010.1557/JMR.2001.0437 ↗
24. Jeon EC, Kim JY, Baik MK, Kim SH, Park JS, Kwon D (2006) Mater Sci Eng A 419:19610.1016/j.msea.2005.12.012 ↗
25. Haykin S (1994) Neural networks: a comprehensive foundation. Macmillan, New York
26. Kloetzer D, Ullner C, Tyulyukovskiy E, Huber N (2006) J Mater Res 21(3):67710.1557/jmr.2006.0077 ↗
27. Ullner C, Reimann E, Kohlhoff H, Subaric-Leitis A (2010) Measurement 43:21610.1016/j.measurement.2009.09.009 ↗
28. Advanced Surface Mechanics GmbH (ASMEC), Radeberg, Germany, www.asmec.de
29. ISO 18265 (2003) Metallic materials—conversion of hardness values
30. Gould JE, Khurana SP, Li T (2006) Weld J 85:111
31. Vogl C, Hoffmann H (2003) Ann CIRP 52:21710.1016/S0007-8506(07)60569-1 ↗