Integral approach for production of thermoplastics microparts by injection moulding
Source abstract
Abstract
Over the last decades, microinjection moulding of thermoplastics has gained a pertinent place on the market of electronic equipment and a broad range of the mechanical aids. However, when size of component drops to the micro-level, the assumptions of the conventional injection moulding cease to describe complex rheological and thermo-mechanical behaviour of the polymer in the microcavity. Miniaturization implies a number of challenges which could only overcome by a series of profound modifications of the conventional injection moulding machine and tools. In the scope of this review, a brief discussion of the strategies applied for adaptation of the conventional injection moulding process to microscale will be introduced. Further, a particular attention will be given to the process/tool/polymer interaction and its influence on the quality signatures of micromoulded parts. In addition an overview of the rheological models of the polymer flow at microcavities and the numerical simulation of the microinjection moulding will then be addressed. Quality evaluation of the micromoulded parts require considering both polymer morphology assessment and final mechanical properties. At microscale, the acquisition of the latter is unlikely by means of conventional mechanical testing, therefore, a brief summary of the mechanical testing for micropolymeric parts will be presented. In order to further evaluate the quality signatures of micromoulded parts an overview of the combined thermo-rheological and structural analysis to link processing history and mechanical solicitations of the part to its short- and long-term performance is also presented here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Injection Molding Process and Properties · Advanced machining processes and optimization · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Mohren PWM, Menges G (eds) (2001) How to make injection molds. Library of congress cataloging-in-publication data, 3rd edn. Hanser Gardner Publications, Inc., Cincinnati
2. Giboz J, Copponnex T, Mélé P (2007) J Micromech Microeng 17(6):96. doi: 10.1088/0960-1317/17/6/R0210.1088/0960-1317/17/6/R02 ↗
3. Piotter V, Bauer W, Hanemann T, Heckele M, Müller C (2008) Microsyst Technol 14(9):1599. doi: 10.1007/s00542-008-0572-910.1007/s00542-008-0572-9 ↗
4. Whiteside B (2003) Plast Rubber Compos 32(6):231. doi: 10.1179/14658010322500265010.1179/146580103225002650 ↗
5. Yao D, Kim B (2002) J Micromech Microeng 12(5):604. doi: 10.1088/0960-1317/12/5/31410.1088/0960-1317/12/5/314 ↗
6. Chen C, Chen S, Liaw W, Chien R (2008) Eur Polym J 44(6):1891. doi: 10.1016/j.eurpolymj.2008.03.00710.1016/j.eurpolymj.2008.03.007 ↗
7. Mnekbi C, Vincent M, Agassant J (2010) Int J Mater Form 3:539. doi: 10.1007/s12289-010-0826-910.1007/s12289-010-0826-9 ↗
8. Tofteberg T (2010) Injection molding of microfeatured polymer components. University of Oslo
9. Sha B, Dimov S, Griffiths C, Packianather M (2007) J Mater Process Technol 183(2–3):284. doi: 10.1016/j.jmatprotec.2006.10.01910.1016/j.jmatprotec.2006.10.019 ↗
10. Sha B, Dimov S, Griffiths C, Packianather M (2007) Int J Adv Manuf Technol 33(1):147. doi: 10.1007/s00170-006-0579-210.1007/s00170-006-0579-2 ↗
11. Theilade U, Hansen H (2007) Int J Adv Manuf Technol 33(1):157. doi: 10.1007/s00170-006-0732-y10.1007/s00170-006-0732-y ↗
12. Lee B, Kim D, Kwon T (2004) Microsyst Technol 10(6):531. doi: 10.1007/s00542-004-0387-210.1007/s00542-004-0387-2 ↗
13. Kalima V et al (2007) Opt Mater 30(2):285. doi: 10.1016/j.optmat.2006.11.04610.1016/j.optmat.2006.11.046 ↗
14. Zhao J, Mayes R, Chen G, Xie H, Chan H (2003) Polym Eng Sci 43(9):1542. doi: 10.1002/pen.1013010.1002/pen.10130 ↗
15. Attia U, Alcock J (2009) Microsyst Technol 15(12):1861. doi: 10.1007/s00542-009-0923-110.1007/s00542-009-0923-1 ↗
16. Zhang H, Ong N, Lam Y (2008) Int J Adv Manuf Technol 37(11):1105. doi: 10.1007/s00170-007-1060-610.1007/s00170-007-1060-6 ↗
17. Liou A, Chen R (2006) Int J Adv Manuf Technol 28(11):1097. doi: 10.1007/s00170-004-2455-210.1007/s00170-004-2455-2 ↗
18. Xie L, Ziegmann G (2009) Microsyst Technol 15(9):1427. doi: 10.1007/s00542-009-0904-410.1007/s00542-009-0904-4 ↗
19. Xie L, Ziegmann G (2009) J Alloys Compd 509(2):226. doi: 10.1016/j.jallcom.2010.09.05110.1016/j.jallcom.2010.09.051 ↗
20. Xie L, Ziegmann G, Hlavac M, Wittmer R (2009) Microsyst Technol 15(7):1031. doi: 10.1007/s00542-009-0877-310.1007/s00542-009-0877-3 ↗
21. Attia U, Marson S, Alcock J (2009) Microfluid Nanofluid 7(1):1. doi: 10.1007/s10404-009-0421-x10.1007/s10404-009-0421-x ↗
22. Bibber D (2004) In: ANTEC 2004 Plastics: Annual Technical Conference, Chicago, USA, May 16–20, 2004, Society of Plastics Engineers, p 3703
23. Dr. Boy GmbH & Co (2011) BOY XS—Ultra-compact injection moulding machines for micro and single-cavity injection moulding. http://dr-boy.de/de/product/boy-xs/ . Accessed 14 Aug 2011
24. Michaeli W, Spennemann A, Gärtner R (2002) Microsyst Technol 8(1):55. doi: 10.1007/s00542-001-0143-910.1007/s00542-001-0143-9 ↗
25. Chang P, Hwang S, Lee H, Huang D (2007) J Mater Process Technol 184(1–3):163. doi: 10.1016/j.jmatprotec.2006.11.01810.1016/j.jmatprotec.2006.11.018 ↗
26. TEC D (2011) Formica PLAST® http://www.desma-tec.de/en/machines/micro_injection/pdf/FormicaPlast_1K_E.pdf . Accessed 17 Aug 2011
27. 50 m-m (2011) Männer/solutions for plastics http://www.maenner-group.com/text/191/en/jump,191/hot-runner/about-maenner/the-maenner-company.html . Accessed 17 Aug 2011
28. Giboz J, Copponnex T, Mélé P (2009) J Micromech Microeng 19(2):1. doi: 10.1088/0960-1317/19/2/02502310.1088/0960-1317/19/2/025023 ↗
29. Pouzada A, Ferreira E, Pontes A (2006) Polym Test 25(8):1017. doi: 10.1016/j.polymertesting.2006.06.00910.1016/j.polymertesting.2006.06.009 ↗
30. Fu G, Loh N, Tor S, Tay B, Murakoshi Y, Maeda R (2006) Microsyst Technol 12(6):554. doi: 10.1007/s00542-005-0071-110.1007/s00542-005-0071-1 ↗
31. Griffiths C, Dimov S, Pham D (2006) In: 4M2006 International Conference on multi-material micro manufacture, Grenoble, France, 20–22 Sept 2006
32. Neto VF, Vaz R, Oliveira MSA, Grácio J (2009) J Mater Process Technol 209(2):1085. doi: 10.1016/j.jmatprotec.2008.03.01210.1016/j.jmatprotec.2008.03.012 ↗
33. Griffiths C, Dimov S, Brousseau E, Chouquet C, Gavillet J, Bigot S (2008) Paper presented at the 4M2008 International conference on multi-material micro manufacture, Cardiff, UK, 09–11 Sept 2008
34. Navabpour P, Teer D, Hitt D, Gilbert M (2006) Surf Coat Technol 201(6):3802. doi: 10.1016/j.surfcoat.2006.06.04210.1016/j.surfcoat.2006.06.042 ↗
35. Grave A, Eriksson T, Hansen H (2007) In: 4M2007 Borovets Bulgaria
36. Yu L, Koh C, Lee L, Koelling K, Madou M (2002) Polym Eng Sci 42(5):871. doi: 10.1002/pen.1099810.1002/pen.10998 ↗
37. Wu C, Liang W (2005) Polym Eng Sci 45(7):1021. doi: 10.1002/pen.2036910.1002/pen.20369 ↗
38. Michaeli W, Rogalla A, Ziegmann C (2000) Macromol Mater Eng 279(1):42. doi: 10.1002/1439-2054(20000601)279:1<42:AID-MAME42>3.0.CO;2-P10.1002/1439-2054(20000601)279:1<42::AID-MAME42>3.0.CO;2-P ↗
39. Rötting O, Röpke W, Becker H, Gärtner C (2002) Microsyst Technol 8(1):32. doi: 10.1007/s00542-002-0106-910.1007/s00542-002-0106-9 ↗
40. Fleischer J, Halvadjiysky G, Haupt S (2008) Microsyst Technol 14(9):1367. doi: 10.1007/s00542-007-0529-410.1007/s00542-007-0529-4 ↗
41. Hormes J, Gottert J, Lian K, Desta Y, Jian L (2003) Nucl Instrum Methods Phys Res B 199:332. doi: 10.1016/S0168-583X(02)01571-910.1016/S0168-583X(02)01571-9 ↗
42. Despa M, Kelly K, Collier J (1999) Microsyst Technol 6(2):60. doi: 10.1007/s00542005017610.1007/s005420050176 ↗
43. Fea Munnik (2003) Microelectron Eng 67–68:96. doi: 10.1016/s0167-9317(03)00064-910.1016/S0167-9317(03)00064-9 ↗
44. Meyer P, Schulz J, Hahn L, Saile V (2008) Microsyst Technol 14(9):1491. doi: 10.1007/s00542-007-0503-110.1007/s00542-007-0503-1 ↗
45. Hirata Y (2003) Nucl Instrum Methods Phys Res B 208:21. doi: 10.1016/s0168-583x(03)00632-310.1016/S0168-583X(03)00632-3 ↗
46. Dea Kim (2006) Polym Eng Sci 46(4):416. doi: 10.1002/pen.2046610.1002/pen.20466 ↗
47. Watt F (1999) Nucl Instrum Methods Phys Res B 158(1–4):165. doi: 10.1016/s0168-583x(99)00513-310.1016/S0168-583X(99)00513-3 ↗
48. Qu W, Wenzel C, Jahn A, Zeidler D (1998) In: Optoelectronic and microelectronic materials device, Perth, WA, Australia, p 380
49. Yang R, Jiang J, Meng W, Wang W (2006) Microsyst Technol 12(6):545. doi: 10.1007/s00542-005-0073-z10.1007/s00542-005-0073-z ↗
50. Zhang J, Tan K, Hong G, Yang L, Gong H (2001) J Micromech Microeng 11(1):20. doi: 10.1088/0960-1317/11/1/30410.1088/0960-1317/11/1/304 ↗
51. Heckele M, Schomburg W (2004) J Micromech Microeng 14(3):1. doi: 10.1088/0960-1317/14/3/R0110.1088/0960-1317/14/3/R01 ↗
52. Chien R, Jong W, Chen S (2005) J Micromech Microeng 15(8):1389. doi: 10.1088/0960-1317/15/8/00310.1088/0960-1317/15/8/003 ↗
53. Li Y, Minoru S, Kazuhiro H (2004) Opt Laser Eng 41(3):545. doi: 10.1016/s0143-8166(03)00026-510.1016/S0143-8166(03)00026-5 ↗
54. Franssila S (ed) (2004) Introduction to microfabrication. Wiley, Chichester
55. Masuzawa T (2000) CIRP Ann Manuf Technol 49(2):473. doi: 10.1016/s0007-8506(07)63451-910.1016/S0007-8506(07)63451-9 ↗
56. Uhlmann E, Piltz S, Doll U (2005) J Mater Process Technol 167(2–3):488. doi: 10.1016/j.jmatprotec.2005.06.01310.1016/j.jmatprotec.2005.06.013 ↗
57. Davim J, Jackson M (eds) (2009) Nano and micromachining. Wiley-ISTE, London
58. Fleischer J, Kotschenreuther J (2007) Int J Adv Manuf Technol 33(1):75. doi: 10.1007/s00170-006-0596-110.1007/s00170-006-0596-1 ↗
59. Gower M (2000) Opt Exp 7(2):56. doi: 10.1364/OE.7.00005610.1364/OE.7.000056 ↗
60. Heyl P, Olschewski T, Wijnaendts R (2001) Microelectron Eng 57–58:775. doi: 10.1016/s0167-9317(01)00485-310.1016/S0167-9317(01)00485-3 ↗
61. Su Y, Shah J, Lin L (2004) J Micromech Microeng 14(3):415. doi: 10.1088/0960-1317/14/3/01510.1088/0960-1317/14/3/015 ↗
62. Piotter V, Hanemann T, Ruprecht R, Haußelt J (1997) Microsyst Technol 3(3):129. doi: 10.1007/s00542005006910.1007/s005420050069 ↗
63. Gornik C (2004) Macromol Symp 217(1):365. doi: 10.1002/masy.20045133210.1002/masy.200451332 ↗
64. Chang P, Hwang S (2006) J Appl Polym Sci 102(4):3704. doi: 10.1002/app.2451510.1002/app.24515 ↗
65. Yoo Y (2009) Curr Appl Phys 9(2, Supplement 1):12. doi: 10.1016/j.cap.2008.12.02310.1016/j.cap.2008.12.023 ↗
66. Chen S, Jong W, Chang Y, Chang J, Cin J (2006) J Micromech Microeng 16(9):1783. doi: 10.1088/0960-1317/16/9/00510.1088/0960-1317/16/9/005 ↗
67. Xie L, Ziegmann G (2008) Microsyst Technol 14(6):809. doi: 10.1007/s00542-008-0566-710.1007/s00542-008-0566-7 ↗
68. McFarland A, Colton J (2005) J Microelectromech Syst 14(6):1375. doi: 10.1109/JMEMS.2005.85185310.1109/JMEMS.2005.851853 ↗
69. Whiteside B et al (2004) Plast Rubber Compos 33:11. doi: 10.1179/14658010422501834610.1179/146580104225018346 ↗
70. Tseng S, Chen Y, Kuo C, Shew B (2005) Microsyst Technol 12(1):116. doi: 10.1007/s00542-005-0014-x10.1007/s00542-005-0014-x ↗
71. Kim Y, Choi Y, Kang S (2005) Microsyst Technol 11(7):464. doi: 10.1007/s00542-005-0596-310.1007/s00542-005-0596-3 ↗
72. Yao D, Kimerling T, Kim B (2006) Polym Eng Sci 46(7):938. doi: 10.1002/pen.2054810.1002/pen.20548 ↗
73. Saito T, Satoh I, Kurosaki Y (2002) Polym Eng Sci 42(12):2418. doi: 10.1002/pen.1112810.1002/pen.11128 ↗
74. Yu M, Young W, Hsu P (2007) Mater Sci Eng A-Struct 460–461:288. doi: 10.1016/j.msea.2007.02.03610.1016/j.msea.2007.02.036 ↗
75. Michaeli W, Klaiber F (2007) In: 4M2007 International Conference on multi-material micro manufacture, Borovets, Bulgary, Taylor and Francis
76. Sha B, Dimov S, Pham D, Griffiths C (2005) In: 4M2005: First International conference on multi-material micro manufacture10.1016/B978-008045263-0/50001-5 ↗
77. Michaeli W, Opfermann D, Kamps T (2007) Int J Adv Manuf Technol 33(1):206. doi: 10.1007/s00170-007-0951-x10.1007/s00170-007-0951-x ↗
78. Srirojpinyo C et al (2004) In: NSTI nanotechnology conference, Boston, MA, USA, p 464
79. Tofteberg T, Andreassen E (2008) In: 24th Annual meeting of the polymer processing society PPS-24, Salerno, Italy
80. Mönkkönen K et al (2002) Polym Eng Sci 42(7):1600. doi: 10.1002/pen.1105510.1002/pen.11055 ↗
81. Zhiltsova T, Neto V, Ferreira J, Oliveira M (2009) In: ICIT & MPT 2009, International conference, Ljubljana, Slovenia, 4–7 October 2009, p 165
82. Sadiku-Agboola O, Rotimi Sadiku E, Adegbola A, Biotidara O (2011) Mater Sci Appl 2(1):30. doi: 10.4236/msa.2011.2100510.4236/msa.2011.21005 ↗
83. Malkin A, Isayev A (eds) (2006) Rheology: concepts, methods, and applications, vol 1. ChemTec Publishing, Toronto
84. Chen S, Tsai R, Chien R, Lin T (2005) Int Commun Heat Mass 32(3–4):501. doi: 10.1016/j.icheatmasstransfer.2004.07.00410.1016/j.icheatmasstransfer.2004.07.004 ↗
85. Piotter V, Mueller K, Plewa K, Ruprecht R, Hausselt J (2002) Microsyst Technol 8(6):387. doi: 10.1007/s00542-002-0178-610.1007/s00542-002-0178-6 ↗
86. Su Y et al (2004) J Micromech Microeng 14(3):415. doi: 10.1088/0960-1317/14/3/01510.1088/0960-1317/14/3/015 ↗
87. Xu G, Yu L, Lee L, Koelling K (2005) Polym Eng Sci 45(6):866. doi: 10.1002/pen.2034110.1002/pen.20341 ↗
88. Lee J, Lee B, Kang T, Kwon T (2010) Polym Eng Sci 50(6):1186. doi: 10.1002/pen.2164210.1002/pen.21642 ↗
89. Rosenbaum E, Hatzikiriakos S (1997) AIChE J 43(3):598. doi: 10.1002/aic.69043030510.1002/aic.690430305 ↗
90. Vasco J, Maia J, Pouzada A (2009) J Micromech Microeng 19(10):1. doi: 10.1088/0960-1317/19/10/10501210.1088/0960-1317/19/10/105012 ↗
91. Cardozo D (2008) J Reinf Plast Compos 27(18):1963. doi: 10.1177/073168440809238610.1177/0731684408092386 ↗
92. Weng C, Lee W, To S, Jiang B (2009) Int Commun Heat Mass 36(3):213. doi: 10.1016/j.icheatmasstransfer.2008.11.00210.1016/j.icheatmasstransfer.2008.11.002 ↗
93. Zhiltsova T, Oliveira M, Vasco J, Pouzada A, Pontes A (2011) In: VI International materials symposium MATERIAIS 2011|XV meeting of SPM, Guimarães, Portugal, 18–20 Apr 2011
94. Yang C, Huang H-X, Castro JM, Yi AY (2011) Polym Eng Sci 51(5):959. doi: 10.1002/pen.2191410.1002/pen.21914 ↗
95. Kim D, Lee K, Kwon T, Lee S (2002) J Micromech Microeng 12(3):236. doi: 10.1088/0960-1317/12/3/30710.1088/0960-1317/12/3/307 ↗
96. Shi F, Zhang X, Li Q, Shen C (2010) In: 9th World Congress on computational mechanics and 4th Asian Pacific congress on computational mechanics, Sydney, Australia, vol 1, p 1
97. Yu L, Lee L, Koelling K (2004) Polym Eng Sci 44(10):1866. doi: 10.1002/pen.2018810.1002/pen.20188 ↗
98. Young W (2005) Microsyst Technol 11(6):410. doi: 10.1007/s00542-004-0474-410.1007/s00542-004-0474-4 ↗
99. Nguyen-Chung T, Jüttner G, Löser C, Pham T, Gehde M (2010) Polym Eng Sci 50(1):165. doi: 10.1002/pen.2153610.1002/pen.21536 ↗
100. Kim D (2008) Microsyst Technol 14(9):1581. doi: 10.1007/s00542-007-0553-410.1007/s00542-007-0553-4 ↗