Porous Ni/TiO2 substrates for planar solid oxide fuel cell applications
Source abstract
Abstract
Anode substrates based on Ni/TiO2 cermets were fabricated for planar solid oxide fuel cells (SOFCs) with the aim of reducing the material costs and preventing thermoelastic bending of the currently used Ni/8YSZ-based cells. Ni/TiO2 substrates were produced via sintering of NiO/NiTiO3 powder compacts and subsequent reduction. The sintering behavior in air and the resulting microstructure were studied in detail. Excellent electrical conductivity and gas permeability was achieved before and after reduction due to coarse microstructure. The co-firing behavior of substrates coated with an anode layer and an 8YSZ electrolyte membrane was analyzed with the aim of identifying those sintering schedules which give flat cells with a gastight electrolyte. Thermoelastic bending of cells is negligible since the thermal expansion coefficient is well adjusted to the 8YSZ electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. H. P. Buchkremer, U. Diekmann, L. G. J. De Haart, H. Kabs, U. Stimming and D. StÖver, in Proceedings of the 5th Int. Symp. Solid Oxide Fuel Cells (SOFC-V), edited by U. Stimming, S. C. Singhal, H. Tagawa and W. Lehnert (The Electrochemical Society, Pennington, NJ, 1997) p. 160.
2. H. Arai, K. Eguchi, T. Setoguchi, R. Yamaguchi, K. Hashimoto and H. Yoshimura, in Proceedings of the 2nd Int. Symp. SOFC (SOFC-II), Athens, edited by F. Grosz, P. Zegers, S. C. Singhal and O. Yamamoto (Commission of the European Communities, Brussels, 1991) p. 167.
3. H. P. Buchkremer, U. Diekmann and D. StÖver, in Proceedings of the 2nd Eur. SOFC Forum, Oslo, edited by B. Thorstensen (The European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland, 1996) p. 221.
4. D. Stolten, R. SpÄh and R. Schamm, in Proceedings of the 5th Int. Symp. Solid Oxide Fuel Cells (SOFC-V), edited by U. Stimming, S. C. Singhal, H. Tagawa and W. Lehnert (The Electrochemical Society, Pennington, NJ, 1997) p. 88.
5. R. WilkenhÖner, W. MallÉner, H.-P. Buchkremer, T H. Hauber and U. Stimming, in Proceedings of the 2nd Eur. SOFC Forum, Oslo, Vol. 2, edited by B. Thorstensen (The European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland, 1996) p. 279.
6. M. Brown, S. Primdahl, M. Mogensen and N. M. Sammes, J. Australasian Ceram. Soc. 34 (1998) 248.
7. F. Tietz, F. J. Dias and A. Naoumidis, in Proceedings of the 3rd European Solid Oxide Fuel Cell Forum, Vol. 1, edited by P. Stevens (The European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland, 1998) p. 171.
8. R. W. Steinbrech, A. Caron, G. Blaß and F. J. Dias, in Proceedings of the 5th Int. Symp. Solid Oxide Fuel Cells (SOFC-V), edited by U. Stimming, S. C. Singhal, H. Tagawa and W. Lehnert (The Electrochemical Society, Pennington, NJ, 1997) p. 727.
9. F. Meschke and R.W. Steinbrech, in Proceedings of the 6th Int. Symp. Solid Oxide Fuel Cells (SOFC-VI), edited by M. Dokiya and S. C. Singhal (The Electrochemical Society, Pennington, NJ, 1999) p. 1047.
10. J. P. Thomas, J. Appl. Phys. 41 (1970) 5104.10.1063/1.1658618 ↗
11. Y. S. Touloukian, R. K. Kirby, R. E. Taylor and T. Y. R. Lee, in “Thermophysical Properties of Matter,” Vol. 13: Thermal Expansion–Nonmetallic Solids (IFI/Plenum, New York, 1977).
12. R. Maenner, E. Ivers-TiffÉe, W. Wersing and W. Kleinlein, in Proceedings of the 2nd Eur. Ceram. Soc. Conf. (Euro-Ceramics II), edited by G. Ziegler and H. Hausner (Deutsche Keramische Gesellschaft, 1991) p. 2085.
13. F. Tietz, G. Stochniol and A. Naoumidis, in Proceedings of the 5th Eur. Conf. on Advanced Materials, Processes and Applications (Euromat' 97), Vol. 2, edited by L. A. J. L. Sarton and H. B. Zeedijk (Netherlands Society for Materials Science, 1997) p. 271.
14. F. Tietz, F. J. Dias, B. Dubiel and H. J. Penkalla, Mater. Sci. Eng. B B68 (1999) 35.10.1016/S0921-5107(99)00333-5 ↗
15. D. Simwonis, A. Naoumidis, F. J. Dias, J. Linke and A. Moropoulou, J. Mater. Res. 12 (1997) 1508.10.1557/JMR.1997.0207 ↗
16. D. Simwonis, F. J. Dias, A. Naoumidis and D._StÖver, in Proceedings of the 5th Eur. Conf. on Advanced Materials, Processes and Applications (Euromat' 97), Vol. 2, edited by L. A. J. L. Sarton and H. B. Zeedijk (Netherlands Society for Materials Science, 1997) p. 375.
17. R. FÖrthmann, G. Blass and H.-P. Buchkremer, in Proceedings of the 5th Int. Symp. Solid Oxide Fuel Cells (SOFC-V), edited by U. Stimming, S. C. Singhal, H. Tagawa and W. Lehnert (The Electrochemical Society, Pennington, NJ, 1997) p. 1003.
18. F. Tietz, in Proceedings of the 9th CIMTEC–World Ceramic Congress and Forum on New Materials, Vol. 24: Innovative Materials in Advanced Energy Technologies, edited by P. Vincenzini (Techna Publishers S.r.l., Faenza, Italy, 1999) p. 61.
19. D. Simwonis, G. Stathis, F. Tietz, R. W. Steinbrech and A. Naoumidis, Proceedings of the 3rd European Solid Oxide Fuel Cell Forum, Vol. 2, edited by P. Stevens (The European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland, 1998) p. 219.
20. W. Laqua, E. W. Schulz and B. Reuter, Z. Anorg. Allg. Chem. 433 (1977) 167.10.1002/zaac.19774330118 ↗
21. R. Vaßen, R. W. Steinbrech, F. Tietz and D. StÖver, Proceedings of the 3rd European Solid Oxide Fuel Cell Forum, Vol. 1, edited by P. Stevens (The European Solid Oxide Fuel Cell Forum, Oberrohrdorf, Switzerland, 1998) p. 557.