journal article·2000-04

Influence of nitrogen addition on the crevice corrosion resistance of nitrogen-bearing austenitic stainless steels

U. Kamachi Mudali, R. K. Dayal

Journal of Materials Science· Volume 35· Issue 7
Publisher page

Abstract

Crevice corrosion studies were carried out on nitrogen-bearing types 304, 316 and 317 austenitic stainless steels (SS) by a potentiodynamic anodic polarisation method in an acidic chloride medium. A special all-glass crevice assembly was used for providing reproducible crevice effects on the surface of the test specimen. The results indicated that the increase in nitrogen content improved the crevice corrosion resistance of the alloys by decreasing the active dissolution, and increasing both passive film stability and the potential at which crevice attack was stable. This was very significant for 304 and 316 SS alloys in comparison with 317 SS alloys. The combined influence of nitrogen and molybdenum was found to be very significant in providing high crevice corrosion resistance for 317 SS alloys. Optical microscopic observation revealed severe crevice attack on types 304 and 316 SS alloys compared to mild crevice attack on type 317 alloys. Based on the results of the present investigation a possible mechanism by which nitrogen addition improved the crevice corrosion resistance is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. M. O. Speidel, Proc. of the Intl. Conf. on High Nitrogen Steels, HNS 88, edited by J. Foct and A. Hendry, (The Institute of Metals, London, UK, 1989) p. 251.
2. K. Osozawa and N. Okato, "Passivity and Its Breakdown on Iron and Iron-Base Alloys" (National Association of Corrosion Engineers, USA, 1976) p. 135.
3. J. J. Eckenrod and C. W. Kovach, Properties of Austenitic Stainless Steels and TheirWeld Metals (Influence of Slight Chemistry Variations), ASTM STP 679, American Society for Testing and Materials, Philadelphia, USA (1979) p. 17.10.1520/STP38350S ↗
4. R. C. Newman, Y. C. Lu, R. Bandy and C. R. Clayton, Proc. of the Ninth Intl. Congress on Metallic Corrosion, Ottawa, Canada 1984, National Research Council, Vol. 4, p. 394.
5. C. R. Clayton, Passivity Mechanisms in Stainless Steels: Mo-N Synergism, Report No. N00014-85-K-0437, NewYork, 1986.
6. U. Kamachi mudali, R. K. Dayal, T. P. S. Gill and J. B. Gnanamoorthy, Werks. und Korros. 37 (1986) 637.10.1002/maco.19860371206 ↗
7. U. Kamachi Mudali, PhD thesis, University of Madras, India, 1993.
8. U. Kamachi Mudali, R. K. Dayal, J. B. Gnanamoorthy and P. Rodriguez, Matls. Trans. JIM. 37 (1996) 1568.10.2320/matertrans1989.37.1568 ↗
9. U. Kamachi Mudali, B. Reynders and M. Stratmann, Matls. Sci. Forum 185-188 (1994) 723.10.4028/www.scientific.net/MSF.185-188.723 ↗
10. R. K. Dayal and J. B. Gnanamoorthy, Corrosion and Maintenance, (Oct.-Dec. 1983), p. 301.
11. T. Sakamoto, H. Abo, T. Okazaki, T. Ogawa, H. Ogawa and T. Zaizen, "Alloys for the Eighties," (Climax Molybdenum Co., USA, 1980) p. 22.
12. S. Azuma, H. Miyuki and T. Kudo, ISIJ Intl. 36 (1996) 793.10.2355/isijinternational.36.793 ↗
13. M. A. Streicher, Materials Performance 22 (1988) 37.
14. A. J. Sedriks, "Corrosion of Stainless Steels" (John-Wiley and Sons, New York, USA, 1979).
15. R. K. Dayal, N. Parvathavarthini and J. B. Gnanamoorthy, British Corrosion Journal 18 (1983) 184.10.1179/000705983798273570 ↗
16. W.-T. Tsai, B. Reynders, M. Stratmann and H. J. Grabke, Corr. Sci. 34 (1993) 1647.10.1016/0010-938X(93)90038-I ↗
17. T. Komori and M. Nakata, Preprint of 39th Annual Symposium on Corrosion and Prevention, Japan (1992) p. 353.
18. M. O. Speidel, Proc. of Intl. Conf. on Stainless Steels, The Iron and Steel Institute of Japan, Chiba, Japan (1996) Vol. 1, p. 25.
19. R. C. Newman and T. Shahrabi, Corro. Sci. 27 (1987) 827.10.1016/0010-938X(87)90040-0 ↗
20. U. Kamachi Mudali, R. K. Dayal, J. B. Gnanamoorthy and P. Rodriguez, Transactionas of IIM 50 (1997) 37.
21. M. G. Fontana and N. D. Greene, "Corrosion Engineering" (McGraw Hill Book Co., New York, USA, 1978).