journal article·2001-12Open access

Corrosion resistance of Cr2O3-Al2O3 ceramics by molten sodium sulphate–vanadium pentoxide

T. Hirata, K. Akiyama, H. Yamamoto

Journal of Materials Science· Volume 36· Issue 24

Abstract

This report describes an investigation of the hot corrosion resistance of Cr2O3-Al2O3 ceramics in V2O5-Na2SO4 molten salt. Adding Cr2O3 to Al2O3 improves the hot corrosion resistance of Al2O3 ceramics, and thickness of the damage zone depends on the sintering temperature and the Cr2O3 content. Corrosion of the Cr2O3-Al2O3 ceramics is caused by the formation of a liquid of the dissolved Na2O-V2O5-(Al,Cr)2O3 system and by dissolution of the Cr2O3-Al2O3 ceramics into this liquid. The corrosion rate of the Cr2O3-Al2O3 ceramics becomes smaller than that of the Al2O3 ceramics because dissolution rate of grains into the liquid phase occurring in grain boundaries decreases, compared with the Al2O3 ceramics. If the sintering temperature is elevated, grain growth would occur to enhance the corrosion resistance of the ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Thermal and Kinetic Analysis · Inorganic and Organometallic Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. R. M. Persoons, in Proceedings of the NATO Advanced Research Workshop on Corrosion of Advanced Ceramics, edited by K. G. Nickel (Kluwer Academic Publishers, 1993) p. 297.
2. N. S. Jacobson, J. Amer. Ceram. Soc. 76 (1993) 3.10.1111/j.1151-2916.1993.tb03684.x ↗
3. T. Sato, Y. Koike, T. Endo and M. Shimada, J. Mater. Sci. 23 (1988) 1405.10.1007/BF01154608 ↗
4. W. C. Say and S. C. Liu, ibid. 31 (1996) 3003.10.1007/BF00356015 ↗
5. D. W. McKee and P. A. Siemers, Thin SolidFilms 73 (1980) 439.10.1016/0040-6090(80)90512-X ↗
6. R. J. Bratton and S. K. Lau, in Proceedings of the International Conference on the Science and Technology of Zirconia, Cleveland (The Amer. Ceram. Soc., 1981), p. 226.
7. H. Watanabe and M. Chigasaki, Yogyo-Kyokai-Shi 92 (1984) 308.10.2109/jcersj1950.92.1066_308 ↗
8. F. S. Pettit, G. H. Meier and J. R. Blachere, in Proceedings of the NATO Advanced ResearchWorkshop on Corrosion of Advanced Ceramics, edited by K. G. Nickel (Kluwer Academic Publishers, 1993) p. 235.10.1007/978-94-011-1182-9_18 ↗
9. R. L. Jones, J. Electrochem. Soc. 133 (1986) 227.10.1149/1.2108530 ↗
10. M. Yoshiba and H. Wada, “High Temperature Corrosion of Advanced Materials and Protective Coatings” (Elsevier Science Publishers, London, 1992) p. 355.
11. Y. Harada, M. Yoshiba, T. Aranami and H. Taira, in Proceedings of Thermal Spraying, Kobe, Japan, May 1995 (High Temperature Society of Japan, 1995) p. 89.
12. H. Yamamoto, S. Ono, H. Tsunoda and H. Motomura, Mitsubishi Jyuko Giho 25 (1988) 25.
13. R. L. Jones, Surface and Coatings Technology 39/40 (1989) 89.10.1016/0257-8972(89)90044-3 ↗
14. R. A. Rapp, “High-Temperature Chemistry” (Elsevier Science Publishers, New York, 1989) p. 291.
15. F. S. Pettit, J. Mater. Res. 8 (1993) 1964.10.1557/JMR.1993.1964 ↗
16. E. N. Bunting, Bureau of Standards Journal of Research 6 (1931) 947.10.6028/jres.006.059 ↗
17. A. E. Thomas, J. Canadian Ceramic Society 45 (1976) 21.
18. M. Nakamura, in Proceedings of the 7th International Symposium on Ultra-High Temperature Materials' 97 in Tajimi (The Committee Meeting of the 7th International Symposium on Ultra-High Temperature Materials, 1997), p. 73.
19. L. A. Klinkova and E. A. Ukshe, Zh. Neorg. Khim. 20(2) (1975) 481.
20. R. E. Tressler, in Proceedings of the NATO Advanced Research Workshop on Corrosion of Advanced Ceramics, edited by K. G. Nickel (Kluwer Academic Publishers, 1993) p. 3.