journal article·2017-02

Experimental investigation of phase equilibria in the Ti–Al–Mo ternary system

X. M. Huang, L. L. Zhu, G. M. Cai, H. S. Liu, Z. P. Jin

Journal of Materials Science· Volume 52· Issue 4
Publisher page

Abstract

Phase equilibria in Ti–Al–Mo ternary system are of fundamental importance to better acquire the phase-forming regulation of TiAl-based alloys. In this paper, phase relations in this system have been investigated with Ti–TiAl–Mo diffusion triples combined with key equilibrated alloys. Five isothermal sections of the Ti–Al–Mo ternary system at 1473, 1373, 1273, 1173, and 1073 K were experimentally determined by means of electron probe microanalysis, scanning electron microscope, and X-ray diffraction. The TiAl and TiAl3 phases show wide ternary composition ranges, while the solubility of Mo in the Ti3Al and αTi phases is relatively limited. The solubility of Al in the β(Ti, Mo) phase decreases from 49.0 at.% at 1473 K to 39.9 at.% at 1073 K while that of Ti in the AlMo3 phase decreases from 25.4 at.% at 1473 K to 20.8 at.% at 1073 K. Moreover, the ternary compound σ forms at a temperature between 1423 and 1373 K through a peritectoid reaction β(Ti, Mo) + AlMo3 → σ. A peri-eutectoid invariant reaction β(Ti, Mo) + AlMo3 → σ + TiAl3 at 1373–1273 K was further deduced and the existence of another invariant reaction β(Ti, Mo) + TiAl3 → σ + TiAl at a temperature between 1273 and 1173 K was also confirmed. The established phase equilibria of the Ti–Al–Mo ternary system may provide essential data required for the construction of reliable thermodynamic assessment of the Ti–Al–Mo system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Leyens C, Peters M (2003) Titanium and titanium alloys. Wiley, Weinheim10.1002/3527602119 ↗
2. Froes F, Suryanarayana C, Eliezer D (1992) Synthesis, properties and applications of titanium aluminides. J Mater Sci 27:5113–5140. doi: 10.1007/BF0055338110.1007/BF00553381 ↗
3. Clemens H, Mayer S (2013) Design processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys. Adv Eng Mater 15:191–21510.1002/adem.201200231 ↗
4. Yamaguchi M, Inui H, Ito K (2000) High-temperature structural intermetallics. Acta Mater 48:307–32210.1016/S1359-6454(99)00301-8 ↗
5. Clemens H, Wallgram W, Kremmer S, Guther V, Otto A, Bartels A (2008) Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability. Adv Eng Mater 10:707–71310.1002/adem.200800164 ↗
6. Kainuma R, Fujita Y, Mitsui H, Ohnuma I, Ishida K (2000) Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti–Al base ternary alloys. Intermetallics 8:855–86710.1016/S0966-9795(00)00015-7 ↗
7. Chen G, Peng Y, Zheng G, Qi Z, Wang M, Yu H, Dong C, Liu CT (2016) Polysynthetic twinned TiAl single crystals for high-temperature applications. Nat Mater 15:876–88110.1038/nmat4677 ↗
8. Li YG, Loretto MH (1994) Microstructure and fracture behaviour of Ti–44Al–xM derivatives. Acta Metall Mater 42:2913–291910.1016/0956-7151(94)90388-3 ↗
9. Das S, Mishurda JC, Allen WP, Perepezko JH, Chumbley LS (1993) Development of (γ + β) lamellar microstructure in a Ti45Al50Mo5 alloy. Scr Metall Mater 28:489–49410.1016/0956-716X(93)90088-A ↗
10. Lee HN, Johnson DR, Inui H, Oh MH, Wee DM, Yamaguchi M (2000) Microstructural control through seeding and directional solidification of TiAl alloys containing Mo and C. Acta Mater 48:3221–323310.1016/S1359-6454(00)00123-3 ↗
11. Witusiewicz VT, Bondar AA, Hecht U, Rex S, Velikanova TY (2008) The Al–B–Nb–Ti system: III. Thermodynamic re-evaluation of the constituent binary system Al–Ti. J Alloys Compd 465:64–7710.1016/j.jallcom.2007.10.061 ↗
12. Schuster JC, Palm M (2006) Reassessment of the binary aluminum–titanium phase diagram. J Phase Equilib 27:255–27710.1361/154770306X109809 ↗
13. Chung HJ, Shim JH, Lee DN (1999) Thermodynamic evaluation and calculation of phase equilibria of the Ti–Mo–C–N quaternary system. J Alloys Compd 282:142–14810.1016/S0925-8388(98)00711-7 ↗
14. Shim JH, Oh CS, Lee DN (1996) A thermodynamic evaluation of the Ti–Mo–C system. Metall Mater Trans B 27B:955–96610.1007/s11663-996-0009-8 ↗
15. Cupid DM, Fabrichnaya O, Ebrahimi F, Seifert HJ (2010) Thermodynamic assessment of the Al–Mo system and of the Ti–Al–Mo System from 0 to 20 at.% Ti. Intermetallics 18:1185–119610.1016/j.intermet.2010.03.010 ↗
16. Du ZM, Guo CP, Li CR, Zhang WJ (2009) Thermodynamic description of the Al–Mo and Al–Fe–Mo systems. J Phase Equilib 30:487–50110.1007/s11669-009-9564-4 ↗
17. Eumann M, Sauthoff G, Palm M (2006) Re-evaluation of phase equilibria in the Al–Mo system. Int J Mater Res 97:1502–151110.3139/146.101412 ↗
18. Jin ZP (1981) A study of the range of stability of phase in some ternary systems. Scand J Metall 10:279–287
19. Zhao JC (2001) A combinatorial approach for structural materials. Adv Eng Mater 3:143–14710.1002/1527-2648(200103)3:3<143::AID-ADEM143>3.0.CO;2-F ↗
20. Zhao JC, Jackson MR, Peluso LA, Brewer LN (2002) A diffusion multiple approach for the accelerated design of structural materials. MRS Bull 27:324–32910.1557/mrs2002.100 ↗
21. Zhao JC (2004) Reliability of the diffusion-multiple approach for phase diagram mapping. J Mater Sci 39:3913–3925. doi: 10.1023/B:JMSC.0000031472.25241.c510.1023/B:JMSC.0000031472.25241.c5 ↗
22. Van Loo FJJ (1990) Multiphase diffusion in binary and ternary solid-state systems. Prog Solid State Chem 20:47–9910.1016/0079-6786(90)90007-3 ↗
23. Banerjee D, Krishnan RV, Vasu KI (1980) A reconsideration of phase relations in the Ti–Al–Mo and Ti–Al systems. Metall Trans A 11A:1095–110510.1007/BF02668133 ↗
24. Chen Z, Jones IP, Small CJ (1997) Structure of the alloy Ti–50Al–15Mo between 800 and 1400 °C. Acta Mater 45:3801–381510.1016/S1359-6454(97)00049-9 ↗
25. Kimura M, Hashimoto K, Morikawa H (1992) Study on phase stability in Ti–Al–X systems at high temperatures. Mater Sci Eng 152:54–5910.1016/0921-5093(92)90046-4 ↗
26. Morris MA, Li YG, Leboeuf M (1994) Variation of the phase distribution in a Ti–44Al–2Mo alloy by annealing: influence on its strength and ductility. Scr Metall Mater 31:449–45410.1016/0956-716X(94)90017-5 ↗
27. Kimura M, Hashimoto K (1999) High-temperature phase equilibria in Ti–Al–Mo system. J Phase Equilib 20:224–23010.1361/105497199770335758 ↗
28. Ge DM, Pylaeva E (1966) Investigation of the phase equilibrium of the Ti–Al–Mo system in the titanium-rich alloy field. Titan Alloys 10:11–18
29. Eremenko VN, Tretyachenko LA, Sukhaya SA, Petukh VM (1990) Investigation of the structure of alloys of the Ti–Mo–Al system. Akad Nauk Ukr 83–135
30. Rashkova B, Hahn KS, Brabetz M, Zhang Z, Schoberl T, Clemens H, Mayer S (2015) Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with a high molybdenum content. Int J Mater Res 106:725–73110.3139/146.111235 ↗
31. Zangvil A, Osamura K, Murakami Y (1975) Determination of phase equilibrium in the Ti-rich Ti–Mo–Al ternary system using the X-ray microanalyser. Metal Sci 9:27–3110.1179/030634575790444973 ↗
32. Böhm H, Löhberg K (1958) A superstructure CsCl type phase in the titanium–molybdenum–aluminium system. Z Metallkd 49:173–178
33. Hansen RT, Raman A (1970) Alloy chemistry of σ(βU)-phases. III. σ phases with non-transition elements. Z Metallkd 61:115–120
34. Hamajima T, Luetjering G, Weissmann S (1972) Microstructure and phase relations for Ti–Mo–Al alloys. Metall Trans A 3:2805–281010.1007/BF02652846 ↗
35. Nino R, Fujinaka J, Shimamura H, Miura S, Mohri T (2003) Phase equilibria and microstructure evolution of Al–Mo–Ti ternary alloys. Intermetallics 11:611–62310.1016/S0966-9795(03)00049-9 ↗
36. Tretyachenko L (2005) Aluminum-Molybdenum-Titanium. In: Martienssen W (ed) Landolt-Boernstein New Series IV, vol (11). Plenum Press, New York, pp 287–316
37. Singh AK, Banerjee D (1997) Transformations in α2 + γ titanium aluminide alloys containing molybdenum: Part II. Heat treatment. Metall Mater Trans A 28:1745–175310.1007/s11661-997-0106-6 ↗
38. Raghavan V (2005) Al–Mo–Ti (aluminum–molybdenum–titanium). J Phase Equilib 26:357–35910.1007/s11669-005-0088-2 ↗
39. Raghavan V (2011) Al–Mo–Ti (aluminum–molybdenum–titanium). J Phase Equilib 32:61–6310.1007/s11669-010-9799-0 ↗
40. Schmoelzer T, Mayer S, Sailer C, Haupt F, Guther V, Staron P, Liss KD, Clemens H (2011) In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti–44at%Al–(3–7)at%Mo alloys. Adv Eng Mater 13:306–31110.1002/adem.201000263 ↗
41. Kenel C, Leinenbach C (2016) Influence of Nb and Mo on microstructure formation of rapidly solidified ternary Ti–Al–(Nb, Mo) alloys. Intermetallics 69:82–8910.1016/j.intermet.2015.10.018 ↗
42. Zhu J, Zhang C, Cao WS, Chen SL, Zhang F, Park JS, Yi SH (2015) Molar volume modeling of Ti–Al–Nb and Ti–Al–Mo ternary systems. JOM 67:1881–188510.1007/s11837-015-1493-6 ↗