journal article·2007-07

Formation of bulk Cu6Sn5 intermetallic compounds in Sn–Cu lead-free solders during solidification

J. Shen, Y. C. Liu, H. X. Gao

Journal of Materials Science· Volume 42· Issue 14
Publisher page

Abstract

The influence of cooling rate and Cu content on the microstructures of the solidified Sn–Cu alloys was investigated in terms of microstructural observation, thermal analysis and theoretical calculation. It was found that bulk Cu6Sn5 intermetalic compounds (IMCs) formed only in the Sn–1.0Cu alloy with lower cooling rate. At higher cooling rate, the actual eutectic point of Sn–Cu solder alloy shifts to the direction of higher Cu concentration. Thus the eutectic and hypereutectic alloys experience a metastable pseudoeutectic solidification route instead. The volume fraction of the bulk Cu6Sn5 IMCs formed in the Sn–1.0Cu alloy, measured by thermal analysis, is larger than that predicted by the equilibrium phase diagram. This could be attributed to eutectic Cu6Sn5 phases, which cling to the primary Cu6Sn5 crystal during the eutectic reaction due to their matching crystalline orientation relationship.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Abtew M, Selvaduray G (2000) Mater Sci Eng R 27:9510.1016/S0927-796X(00)00010-3 ↗
2. Zeng K, Tu KN (2002) Mater Sci Eng R 38:5510.1016/S0927-796X(02)00007-4 ↗
3. Laurila T, Vuorinen V, Kivilahti JK (2005) Mater Sci Eng R 49:110.1016/j.mser.2005.03.001 ↗
4. Bae KS, Kim SJ (2002) J Mater Res 17:74310.1557/JMR.2002.0108 ↗
5. Suganuma K (2001) Curr Opin Solid State Mater Sci 5:5510.1016/S1359-0286(00)00036-X ↗
6. Lee YG, Duh JG (1998) J Mater Sci 33:556910.1023/A:1004499728840 ↗
7. Lee YG, Duh JG (1999) J Mater Sci: Mater Electron 10:33
8. Islam MN, Chan YC (2005) Mater Sci Eng B 117:24610.1016/j.mseb.2004.11.027 ↗
9. Yoon JW, Kim SW, Jung SB (2004) J Alloys Comp 385:19210.1016/j.jallcom.2004.05.009 ↗
10. Yoon JW, Jung SB (2005) J Alloys Comp 396:12210.1016/j.jallcom.2004.12.009 ↗
11. Ma X, Wang FJ, Qian YY, Yoshida F (2003) Mater Lett 57:336110.1016/S0167-577X(03)00075-2 ↗
12. Wang FJ , Ma X, Qian YY (2005) Scripta Mater 53:69910.1016/j.scriptamat.2005.05.013 ↗
13. Kempen ATW, Sommer F, Mittemeijer EJ (2002) Thermo Acta 383:2110.1016/S0040-6031(01)00699-2 ↗
14. Moon KW, Boettinger WJ, Kitten UR, Biancaniello FS, Handwerker CA (2000) J Electron Mater 29:112210.1007/s11664-000-0003-x ↗
15. Chalmers B (1964) Principles of solidification. John Wiley & Sons Inc, New York, p 6
16. Kempen ATW, Sommer F, Mittemeijer EJ, (2002) Acta Mater 50:354510.1016/S1359-6454(02)00149-0 ↗
17. Kim KS, Huh SH, Suganuma K, (2002) Mater Sci Eng A106:333