journal article·2024-02

Fluorinated ethylene propylene (FEP)/graphene nanoplatelet (GNP) nanocomposites as outstanding EMI shielding and heat dissipation material

Karolina Filak, Jakub Sitek, Przemysław Michalski, Tomasz Gołofit, Krzysztof R. Szymański, Piotr A. Zaleski, Anna Łapińska

Journal of Materials Science· Volume 59· Issue 7
Publisher page

Abstract

The progressive miniaturization of electronic devices necessitates effective protection against electromagnetic interference and overheating. This study aims to explore the potential of polymer nanocomposites as multifunctional materials to address these challenges in applications related to airborne and space technology. Our investigation focuses on the hypothesis that the incorporation of graphene nanoplatelets (GNPs) into a fluoropolymer matrix (fluorinated ethylene propylene—FEP) will yield a composite material capable of simultaneously providing electromagnetic interference (EMI) shielding and enhanced thermal properties. This research presents initial studies as the foundational step toward designing multifunctional materials for specialized airborne and space technologies applications. The samples, comprising FEP and GNP, were fabricated using a simple powdered masterbatch hot pressing technique, ensuring optimal filler dispersion within the matrix. The dispersion quality was evaluated using Raman mapping and sheet/volume resistivity analyses. Subsequently, adding 25 wt% GNP results in outstanding EMI shielding effectiveness: SETOT ~ 50 dB at 5 GHz for only 1-mm-thick sample and almost 3000% enhancement of thermal conductivity (exceeding 4 Wm−1 K−1), similarly nearly 2000% enhancement of thermal diffusivity (2 mm2 s−1) and an electrical conductivity of over 7 S cm−1 were observed. These results stand out for their remarkable values, especially considering the use of straightforward production methods without further structural improvements or metallic additives.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Tribology and Wear Analysis · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Boyer RR, Cotton JD, Mohaghegh M, Schafrik RE (2015) Materials considerations for aerospace applications. MRS Bull 40(12):1055–1066. https://doi.org/10.1557/mrs.2015.27810.1557/mrs.2015.278 ↗
2. Thiruchitrambalam M, Bubesh Kumar D, Shanmugam D, Jawaid M (2020) A review on PEEK composites—manufacturing methods, properties and applications. Mater Today Proc 33:1085–1092. https://doi.org/10.1016/j.matpr.2020.07.12410.1016/j.matpr.2020.07.124 ↗
3. Murali KP, Rajesh S, Prakash O, Kulkarni AR, Ratheesh R (2009) Comparison of alumina and magnesia filled PTFE composites for microwave substrate applications. Mater Chem Phys 113(1):290–295. https://doi.org/10.1016/j.matchemphys.2008.07.08910.1016/j.matchemphys.2008.07.089 ↗
4. https://www.3m.com/3M/en_US/p/d/b40070076/
5. https://www.materialdatacenter.com/ms/en/Kynar/Arkema/Kynar%C2%AE+720/c08810c6/248
6. Kreitlow M, Kebel R, Nieder F, Sabath F, Smailus F, Stadtler T (2015) Robustness of Ethernet in complex aircraft environment. In 2015 Asia–Pacific Symposium on Electromagnetic Compatibility (APEMC), IEEE, pp 657–660. https://doi.org/10.1109/APEMC.2015.7175283.10.1109/APEMC.2015.7175283 ↗
7. Chung DDL (2020) Materials for electromagnetic interference shielding. Mater Chem Phys 255:123587. https://doi.org/10.1016/j.matchemphys.2020.12358710.1016/j.matchemphys.2020.123587 ↗
8. Wang X-Y et al (2022) Electromagnetic interference shielding materials: recent progress, structure design, and future perspective. J Mater Chem C Mater 10(1):44–72. https://doi.org/10.1039/D1TC04702G10.1039/D1TC04702G ↗
9. Bharat N, Bose PSC (2021) An overview on the effect of reinforcement and wear behaviour of metal matrix composites. Mater Today Proc 46:707–713. https://doi.org/10.1016/j.matpr.2020.12.08410.1016/j.matpr.2020.12.084 ↗
10. Roh J-S, Chi Y-S, Kang TJ, Nam S (2008) Electromagnetic shielding effectiveness of multifunctional metal composite fabrics. Text Res J 78(9):825–835. https://doi.org/10.1177/004051750708974810.1177/0040517507089748 ↗
11. Santhosi BVSRN, Ramji K, Rao NBRM (2020) Design and development of polymeric nanocomposite reinforced with graphene for effective EMI shielding in X-band. Physica B Condens Matter 586:412144. https://doi.org/10.1016/j.physb.2020.41214410.1016/j.physb.2020.412144 ↗
12. Panahi-Sarmad M, Noroozi M, Xiao X, Park CB (2022) Recent advances in graphene-based polymer nanocomposites and foams for electromagnetic interference shielding applications. Ind Eng Chem Res 61(4):1545–1568. https://doi.org/10.1021/acs.iecr.1c0411610.1021/acs.iecr.1c04116 ↗
13. Bagotia N, Choudhary V, Sharma DK (2018) A review on the mechanical, electrical and EMI shielding properties of carbon nanotubes and graphene reinforced polycarbonate nanocomposites. Polym Adv Technol 29(6):1547–1567. https://doi.org/10.1002/pat.427710.1002/pat.4277 ↗
14. Huang X et al (2020) Thermal conductivity of graphene-based polymer nanocomposites. Mater Sci Eng R Rep 142:100577. https://doi.org/10.1016/j.mser.2020.10057710.1016/j.mser.2020.100577 ↗
15. Kumar A, Sharma K, Dixit AR (2019) A review of the mechanical and thermal properties of graphene and its hybrid polymer nanocomposites for structural applications. J Mater Sci 54(8):5992–6026. https://doi.org/10.1007/s10853-018-03244-310.1007/s10853-018-03244-3 ↗
16. Liang J et al (2009) Electromagnetic interference shielding of graphene/epoxy composites. Carbon 47(3):922–925. https://doi.org/10.1016/j.carbon.2008.12.03810.1016/j.carbon.2008.12.038 ↗
17. Pavlou C et al (2021) Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range. Nat Commun 12(1):4655. https://doi.org/10.1038/s41467-021-24970-410.1038/s41467-021-24970-4 ↗
18. Sun X, Ramesh P, Itkis ME, Bekyarova E, Haddon RC (2010) Dependence of the thermal conductivity of two-dimensional graphite nanoplatelet-based composites on the nanoparticle size distribution. J Phys Condens Matter 22(33):334216. https://doi.org/10.1088/0953-8984/22/33/33421610.1088/0953-8984/22/33/334216 ↗
19. Chung S-L, Lin J-S (2016) Thermal conductivity of epoxy resin composites filled with combustion synthesized h-BN particles. Molecules 21(5):670. https://doi.org/10.3390/molecules2105067010.3390/molecules21050670 ↗
20. Al-Saleh MH, Sundararaj U (2009) A review of vapor grown carbon nanofiber/polymer conductive composites. Carbon 47(1):2–22. https://doi.org/10.1016/j.carbon.2008.09.03910.1016/j.carbon.2008.09.039 ↗
21. Shahil KMF, Balandin AA (2012) Graphene–multilayer graphene nanocomposites as highly efficient thermal interface materials. Nano Lett 12(2):861–867. https://doi.org/10.1021/nl203906r10.1021/nl203906r ↗
22. Łapińska A et al (2023) Non-metallic multifunctional PVDF—graphene nanoplatelets nanocomposites as an effective electromagnetic shield, thermal and electrical conductor. Mater Today Adv 18:100365. https://doi.org/10.1016/j.mtadv.2023.10036510.1016/j.mtadv.2023.100365 ↗
23. Cai X, Jiang Z, Zhang X, Gao T, Yue K, Zhang X (2018) Thermal property improvement of polytetrafluoroethylene nanocomposites with graphene nanoplatelets. RSC Adv 8(21):11367–11374. https://doi.org/10.1039/C8RA01047A10.1039/C8RA01047A ↗
24. Jinhong Yu, Huang X, Chao Wu, Jiang P (2011) Permittivity, thermal conductivity and thermal stability of poly(vinylidene fluoride)/graphene nanocomposites. IEEE Trans Dielectr Electr Insul 18(2):478–484. https://doi.org/10.1109/TDEI.2011.573945210.1109/TDEI.2011.5739452 ↗
25. Das A, Hayvaci HT, Tiwari MK, Bayer IS, Erricolo D, Megaridis CM (2011) Superhydrophobic and conductive carbon nanofiber/PTFE composite coatings for EMI shielding. J Colloid Interface Sci 353(1):311–315. https://doi.org/10.1016/j.jcis.2010.09.01710.1016/j.jcis.2010.09.017 ↗
26. Cheng H-C, Chen C-R, Hsu S, Cheng K-B (2020) Electromagnetic shielding effectiveness and conductivity of PTFE/Ag/MWCNT conductive fabrics using the screen printing method. Sustainability 12(15):5899. https://doi.org/10.3390/su1215589910.3390/su12155899 ↗
27. Wei Q et al (2023) Scalable fabrication of nacre-structured graphene/polytetrafluoroethylene films for outstanding EMI shielding under extreme environment. Small 19(35):2302082. https://doi.org/10.1002/smll.20230208210.1002/smll.202302082 ↗
28. Lee MH, Kim HY, Kim J, Han JT, Lee Y-S, Woo JS (2020) Influence of oxyfluorinated graphite on fluorinated ethylene–propylene composites as bipolar plates. Carbon Lett 30(3):345–352. https://doi.org/10.1007/s42823-019-00103-210.1007/s42823-019-00103-2 ↗
29. Park KS et al (2022) Fluorinated ethylene–propylene/graphite composites reinforced with silicon carbide for the bipolar plates of fuel cells. Int J Hydrog Energy 47(6):4090–4099. https://doi.org/10.1016/j.ijhydene.2021.11.02810.1016/j.ijhydene.2021.11.028 ↗
30. Park H-J, Woo JS, Kim SH, Park KS, Park SH, Park S-Y (2019) High-performance fluorinated ethylene-propylene/graphite composites interconnected with single-walled carbon nanotubes. Macromol Res 27(11):1161–1166. https://doi.org/10.1007/s13233-019-7156-710.1007/s13233-019-7156-7 ↗
31. Zhang G, Yin J, Yan M, Zhang H, Yin X (2021) Improved through-plane thermal conductivity and mechanical properties of low-dielectric FEP/HBN composites by adding PTFE nanoparticles. ACS Appl Electron Mater 3(10):4568–4578. https://doi.org/10.1021/acsaelm.1c0071010.1021/acsaelm.1c00710 ↗
32. Olifirov LK, Stepashkin AA, Sherif G, Tcherdyntsev VV (2021) tribological, mechanical and thermal properties of fluorinated ethylene propylene filled with Al–Cu–Cr quasicrystals, polytetrafluoroethylene, synthetic graphite and carbon black. Polymers (Basel) 13(5):781. https://doi.org/10.3390/polym1305078110.3390/polym13050781 ↗
33. Tan X et al (2022) Rational design of graphene/polymer composites with excellent electromagnetic interference shielding effectiveness and high thermal conductivity: a mini review. J Mater Sci Technol 117:238–250. https://doi.org/10.1016/j.jmst.2021.10.05210.1016/j.jmst.2021.10.052 ↗
34. Nah S, Kim D, Chung H, Han S, Yoon M (2007) A new quantitative Raman measurement scheme using Teflon as a novel intensity correction standard as well as the sample container. J Raman Spectrosc 38(5):475–482. https://doi.org/10.1002/jrs.166710.1002/jrs.1667 ↗
35. Nagata K, Iwabuki H, Nigo H (1998) Effect of particle size of graphites on electrical conductivity of graphite/polymer composite. Compos Interfaces 6(5):483–495. https://doi.org/10.1163/156855499X0016110.1163/156855499X00161 ↗
36. Cunningham BD, Baird DG (2007) Development of bipolar plates for fuel cells from graphite filled wet-lay material and a compatible thermoplastic laminate skin layer. J Power Sources 168(2):418–425. https://doi.org/10.1016/j.jpowsour.2007.03.03610.1016/j.jpowsour.2007.03.036 ↗
37. Lee MH et al (2018) Structural optimization of graphite for high-performance fluorinated ethylene–propylene composites as bipolar plates. Int J Hydrog Energy 43(48):21918–21927. https://doi.org/10.1016/j.ijhydene.2018.09.10410.1016/j.ijhydene.2018.09.104 ↗
38. Szymański KR, Zaleski PA (2021) Determination of the sheet resistance of an infinite thin plate with five point contacts located at arbitrary positions. Measurement 169:108360. https://doi.org/10.1016/j.measurement.2020.10836010.1016/j.measurement.2020.108360 ↗
39. Jiang Z et al (2017) Preparation and properties of melt-spinning fluorinated ethylene propylene fibres. High Perform Polym 29(4):476–483. https://doi.org/10.1177/095400831665168910.1177/0954008316651689 ↗
40. Han S et al (2020) Thermally and electrically conductive multifunctional sensor based on epoxy/graphene composite. Nanotechnology 31(7):075702. https://doi.org/10.1088/1361-6528/ab504210.1088/1361-6528/ab5042 ↗
41. Gresil M, Wang Z, Poutrel Q-A, Soutis C (2017) Thermal diffusivity mapping of graphene based polymer nanocomposites. Sci Rep 7(1):5536. https://doi.org/10.1038/s41598-017-05866-010.1038/s41598-017-05866-0 ↗
42. Sabira K, Jayakrishnan MP, Saheeda P, Jayalekshmi S (2018) On the absorption dominated EMI shielding effects in free standing and flexible films of poly(vinylidene fluoride)/graphene nanocomposite. Eur Polym J 99:437–444. https://doi.org/10.1016/j.eurpolymj.2017.12.03410.1016/j.eurpolymj.2017.12.034 ↗
43. Yan D-X, Ren P-G, Pang H, Fu Q, Yang M-B, Li Z-M (2012) Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite. J Mater Chem 22(36):18772. https://doi.org/10.1039/c2jm32692b10.1039/c2jm32692b ↗
44. Xu L et al (2023) Double layered design for electromagnetic interference shielding with ultra-low reflection features: PDMS including carbon fibre on top and graphene on bottom. Compos Sci Technol 231:109797. https://doi.org/10.1016/j.compscitech.2022.10979710.1016/j.compscitech.2022.109797 ↗
45. Wang M, Tang X-H, Cai J-H, Wu H, Shen J-B, Guo S-Y (2021) Construction, mechanism and prospective of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: a review. Carbon 177:377–402. https://doi.org/10.1016/j.carbon.2021.02.04710.1016/j.carbon.2021.02.047 ↗
46. Eswaraiah V, Sankaranarayanan V, Ramaprabhu S (2011) Functionalized graphene–PVDF foam composites for EMI shielding. Macromol Mater Eng 296(10):894–898. https://doi.org/10.1002/mame.20110003510.1002/mame.201100035 ↗
47. Alam FE et al (2017) In situ formation of a cellular graphene framework in thermoplastic composites leading to superior thermal conductivity. J Mater Chem A Mater 5(13):6164–6169. https://doi.org/10.1039/C7TA00750G10.1039/C7TA00750G ↗
48. Kuhn HH, Child AD, Kimbrell WC (1995) Toward real applications of conductive polymers. Synth Met 71(1–3):2139–2142. https://doi.org/10.1016/0379-6779(94)03198-F10.1016/0379-6779(94)03198-F ↗
49. Chandrasekhar P, Naishadham K (1999) Broadband microwave absorption and shielding properties of a poly(aniline). Synth Met 105(2):115–120. https://doi.org/10.1016/S0379-6779(99)00085-510.1016/S0379-6779(99)00085-5 ↗
50. Chung DDL (2001) Electromagnetic interference shielding effectiveness of carbon materials. Carbon 39(2):279–285. https://doi.org/10.1016/S0008-6223(00)00184-610.1016/S0008-6223(00)00184-6 ↗
51. Al-Saleh MH, Sundararaj U (2009) Electromagnetic interference shielding mechanisms of CNT/polymer composites. Carbon 47(7):1738–1746. https://doi.org/10.1016/j.carbon.2009.02.03010.1016/j.carbon.2009.02.030 ↗
52. Saini P, Choudhary V, Singh BP, Mathur RB, Dhawan SK (2009) Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding. Mater Chem Phys 113(2–3):919–926. https://doi.org/10.1016/j.matchemphys.2008.08.06510.1016/j.matchemphys.2008.08.065 ↗
53. Jiang D et al (2019) Electromagnetic interference shielding polymers and nanocomposites—a review. Polym Rev 59(2):280–337. https://doi.org/10.1080/15583724.2018.154673710.1080/15583724.2018.1546737 ↗
54. Wang L, Ma Z, Zhang Y, Chen L, Cao D, Gu J (2021) Polymer-based EMI shielding composites with 3D conductive networks: a mini-review. SusMat 1(3):413–431. https://doi.org/10.1002/sus2.2110.1002/sus2.21 ↗
55. Patri M, Hande VR, Phadnis S, Deb PC (2004) Radiation-grafted solid polymer electrolyte membrane: thermal and mechanical properties of sulfonated fluorinated ethylene propylene copolymer (FEP)-graft-acrylic acid membranes. Polym Adv Technol 15(10):622–627. https://doi.org/10.1002/pat.51210.1002/pat.512 ↗
56. Pan J, Xiao C, Huang Y, Zhu Z (2020) Preparation and properties of melt-spun poly(fluorinated ethylene-propylene)/graphene composite fibers. Polym Compos 41(1):233–243. https://doi.org/10.1002/pc.2536410.1002/pc.25364 ↗
57. Shtein M, Nadiv R, Buzaglo M, Kahil K, Regev O (2015) Thermally conductive graphene-polymer composites: size, percolation, and synergy effects. Chem Mater 27(6):2100–2106. https://doi.org/10.1021/cm504550e10.1021/cm504550e ↗
58. Kargar F et al (2018) Thermal percolation threshold and thermal properties of composites with high loading of graphene and boron nitride fillers. ACS Appl Mater Interfaces 10(43):37555–37565. https://doi.org/10.1021/acsami.8b1661610.1021/acsami.8b16616 ↗
59. Song SH et al (2013) Enhanced thermal conductivity of epoxy-graphene composites by using non-oxidized graphene flakes with non-covalent functionalization. Adv Mater 25(5):732–737. https://doi.org/10.1002/adma.20120273610.1002/adma.201202736 ↗
60. Subodh G, Manjusha MV, Philip J, Sebastian MT (2008) Thermal properties of polytetrafluoroethylene/Sr2 Ce2 Ti5 O16 polymer/ceramic composites. J Appl Polym Sci 108(3):1716–1721. https://doi.org/10.1002/app.2760610.1002/app.27606 ↗
61. Xu Y, Ray G, Abdel-Magid B (2006) Thermal behavior of single-walled carbon nanotube polymer–matrix composites. Compos Part A Appl Sci Manuf 37(1):114–121. https://doi.org/10.1016/j.compositesa.2005.04.00910.1016/j.compositesa.2005.04.009 ↗
62. Maity N, Mandal A, Nandi AK (2016) Synergistic interfacial effect of polymer stabilized graphene via non-covalent functionalization in poly(vinylidene fluoride) matrix yielding superior mechanical and electronic properties. Polymer (Guildf) 88:79–93. https://doi.org/10.1016/j.polymer.2016.02.02810.1016/j.polymer.2016.02.028 ↗
63. Bagotia N, Mohite H, Tanaliya N, Sharma DK (2018) A comparative study of electrical, EMI shielding and thermal properties of graphene and multiwalled carbon nanotube filled polystyrene nanocomposites. Polym Compos 39(S2):E1041. https://doi.org/10.1002/pc.2446510.1002/pc.24465 ↗