Influence of thermomechanical processing parameters on critical temperatures to develop an Advanced High-Strength Steel microstructure
Source abstract
Abstract
Abstract A good selection of the thermomechanical processing parameters will optimize the function of alloying elements to get the most of mechanical properties in Advanced High-Strength Steels for automotive components, where high resistance is required for passenger safety. As such, critical processing temperatures must be defined taking into account alloy composition, in order for effective thermomechanical processing schedules to be designed. These critical temperatures mainly include the recrystallization stop temperature (T5%) and the transformation temperatures (Ar1, Ar3, Bs, etc.). These critical processing temperatures were characterized using different thermomechanical conditions.T5%was determined through the softening evaluation on double hit tests and the observation of prior austenite grain boundaries on the microstructure. Phase transformation temperatures were measured by dilatometry experiments at different cooling rates. The results indicate that the strain per pass and the interpass time will influence the most on the determination ofT5%. The range of temperatures between the recrystallized and non-recrystallized regions can be as narrow as 30 °C at a higher amount of strain. The proposed controlled thermomechanical processing schedule involves getting a severely deformed austenite with a high dislocation density and deformation bands to increase the nucleation sites to start the transformation products. This microstructure along with a proper cooling strategy will lead to an enhancement in the final mechanical properties of a particular steel composition.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Cheah LW (2010) Cars on a diet: the material and energy impacts of passenger vehicle weight reduction in the U.S., Degree of Doctor of Philosophy in Engineering Systems, Engineering Systems Division, Massachusetts Institute of Technology
2. Gan W, Babu S, Kapustka N, Wagoner R (2006) Microstructural effects on the springback of advanced high- strength steel. Metall Trans A 37(11):3221–3231. https://doi.org/10.1007/BF0258615710.1007/BF02586157 ↗
3. WorldAutoSteel (2017) Advanced High-Strength Steels Application Guidelines Version 6.0
4. Soleimani M, Kalhor A, Mirzadeh H (2020) Transformation-induced plasticity (TRIP) in advanced steels: a review. Mater Sci Eng A 795(140023):1–42. https://doi.org/10.1016/j.msea.2020.140023 (ISSN 0921-5093)10.1016/j.msea.2020.140023 ↗
5. Cabibbo M, Fabrizi A, Merlin M, Garagnani G (2008) Effect of thermo-mechanical treatments on the microstructure of micro-alloyed low-carbon steels. J Mater Sci 43(21):6857–6865. https://doi.org/10.1007/s10853-008-3000-810.1007/s10853-008-3000-8 ↗
6. DeArdo A, Garcia C, Palmiere E (1991) Thermomechanical processing of steel, vol 4 Heat Treating, 10th ed., Metals Handbook ASM International, pp 237–255
7. JMatPro software v9.0 for materials properties. Sente Software. https://www.sentesoftware.co.uk/. (2018). Accessed 2018
8. Homsher CN, Van Tyne CJ (2015) Comparison of two physical simulation tests to determine the no-recrystallization temperature in hot rolled steel plates. Mater Perform Charact 4(3):293–306. https://doi.org/10.1520/MPC2015000210.1520/MPC20150002 ↗
9. Dutta B, Palmiere E (2003) Effect of prestrain and deformation temperature on the recrystallization behavior of steels microalloyed with niobium. Metall Mater Trans A 34(6):1237–1247. https://doi.org/10.1007/s11661-003-0234-610.1007/s11661-003-0234-6 ↗
10. Lin YC, Chen M-S, Zhong J (2008) Study of static recrystallization kinetics in a low alloy steel. Comput Mater Sci 44(2):316–321. https://doi.org/10.1016/j.commatsci.2008.03.02710.1016/j.commatsci.2008.03.027 ↗
11. Loveday MS, Mahon GJ, Roebuck B, Lacey AJ, Palmiere EJ, Sellars CM, van der Winden MR (2006) Measurement of flow stress in hot plane strain compression tests. Mater High Temp 23(2):85–118. https://doi.org/10.1179/mht.2006.00610.1179/mht.2006.006 ↗
12. Hinton JS (2006) Laboratory simulation of microstructural evolution in AISI 430 ferritic stainless steel during the steckel mill process. PhD Department of Engineering Materials. The University of Sheffield
13. Cui Z (2016) Thermomechanical processing of structural steels with dilute niobium additions. PhD Department of Engineering Materials. The University of Sheffield10.1007/978-3-319-48767-0_30 ↗
14. Advanced metals processing - Research Centres - Materials Science and Engineering. University of Sheffield. accessed in 2019. https://www.sheffield.ac.uk/materials/centresandfacilities/metalsprocessing.
15. Sun L (2012) The effects of strain path reversal on austenite grain subdivision, recrystallisation and phase transformations in microalloyed steel. PhD Department of Engineering Materials. The University of Sheffield10.4028/www.scientific.net/MSF.715-716.667 ↗
16. Homsher C (2013) Determination of the non-recrystallization temperature (TNR) in multiple microalloyed steels. Master of Science, Colorado school of mines
17. Zhao S, Wei D, Li R, Zhang L (2014) Effect of cooling rate on phase transformation and microstructure of Nb-Ti microalloyed steel. Mater Trans 55(8):1274–1279. https://doi.org/10.2320/matertrans.M201339510.2320/matertrans.M2013395 ↗
18. Mintz B, Banerjee JR, Banks KM (2011) Regression equation for Ar3 temperature for coarse grained as cast steels. Ironmak Steelmak 38(3):197–203. https://doi.org/10.1179/030192310X1282737573142910.1179/030192310X12827375731429 ↗
19. Yuan X, Liu Z, Jiao S, Ma L, Wang G (2006) The onset temperatures of gamma to alpha phase transformation in hot deformed and non-deformed Nb microalloyed steels. ISIJ Int 46(4):579–58510.2355/isijinternational.46.579 ↗
20. Roebuck B, Lord JD, Brooks M, Loveday MS, Sellars CM, Evans RW (2006) Measurement of flow stress in hot axisymmetric compression tests. Mater High Temp 23(2):59–83. https://doi.org/10.1179/mht.2006.00510.1179/mht.2006.005 ↗
21. Ebrahimi GR, Momeni A, Kazemi S, Alinejad H (2017) Flow curves, dynamic recrystallization and precipitation in a medium carbon low alloy steel. Vacuum 142:135–145. https://doi.org/10.1016/j.vacuum.2017.05.01010.1016/j.vacuum.2017.05.010 ↗
22. Palmiere EJ, Garcia CI (1996) DeArdo AJ (1996) The influence of niobium supersaturation in austenite on the static recrystallization behavior of low carbon microalloyed steels. Metall Mater Trans A 27A:951–96010.1007/BF02649763 ↗
23. Deardo AJ (2003) Niobium in modern steels. Int Mater Rev 48(6):371–402. https://doi.org/10.1179/09506600322500883310.1179/095066003225008833 ↗
24. Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count (2019). ASTM E562–19:1–7. ASTM International
25. Neerajagarwal, Chaudhari GP, Nath SK (2013) Fine grained dual phase steel by thermomechanical Processing. Int J Appl Res Mech Eng 3(1):22–25
26. Buchmayr B, Degner M, Palkowski H (2018) Future challenges in the steel industry and consequences for rolling plant technologies. BHM 163(3):76–83. https://doi.org/10.1007/s00501-018-0708-x10.1007/s00501-018-0708-x ↗
27. Nasiri Z, Ghaemifar S, Naghizadeh M, Mirzadeh H (2021) Thermal mechanisms of grain refinement in steels: a review. Met Mater Int 27:2078–2094. https://doi.org/10.1007/s12540-020-00700-110.1007/s12540-020-00700-1 ↗