journal article·2020-06

ZnO@ZIF-8 inverse opal structure photoanode for efficient CdS/CdSe co-sensitized quantum dot solar cells

Yuxuan Li, Shengze Xiao, Weixin Li, Xuan He, Wei Fang, Hui Chen, Jing Ge, Lei Zhao

Journal of Materials Science· Volume 55· Issue 17
Publisher page

Abstract

Photoanodes in quantum-dot-sensitized solar cells are essential to the process of light collection and charge transfer. In this paper, three-dimensional inverse opal (ZnO@ZIF-8 3D IO) photoanode is fabricated via a self-assembled opal template method. The synthesized photoanode has completely connected pores with extended diameter, thus promoting the permeability of QDs and electrolyte. Meanwhile, the light trapping ability and charge transfer process can be enhanced due to the slow photon and multi-scattering effect of the regularly interconnected macroporous array structure. ZIF-8 shell coated on the surface of ZnO IO not only provides high porosity but also serves as a protective passivation layer to reduce the carriers recombination occurred at the interfacial. In order to investigate the charge transport mechanism of ZnO @ ZIF-8 IO, cascaded CdS/CdSe quantum dots were used as sensitizers. Benefiting from the IO structure and ZIF-8 modification, the photoelectric conversion efficiency of solar cells based on ZnO@ZIF-8 IO can reach 1.75% (1.71 ± 0.04%), almost twice of that of the solar cells based on ZnO IO photoanode (0.81 ± 0.05%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Boro B, Gogoi B, Rajbongshi B, Ramchiary A (2018) Nano-structured TiO2/ZnO nanocomposite for dye-sensitized solar cells application: a review. Renew Sustain Energy Rev 81:2264–227010.1016/j.rser.2017.06.035 ↗
2. Ge J, Li W, He X, Chen H, Fang W, Du X, Li Y, Zhao L (2020) Hybrid CdSe/CsPbI3 quantum dots for interface engineering in perovskite solar cells. Sustain Energy Fuels. https://doi.org/10.1039/C9SE01205B10.1039/C9SE01205B ↗
3. Singh N, Salam Z, Subasri A, Sivasankar N, Subramania A (2018) Development of porous TiO2 nanofibers by solvosonication process for high performance quantum dot sensitized solar cell. Solar Energy Mater Solar Cells 179:417–42610.1016/j.solmat.2018.01.042 ↗
4. Jiao S, Du J, Du Z, Long D, Jiang W, Pan Z, Li Y, Zhong X (2017) Nitrogen-doped mesoporous carbons as counter electrodes in quantum dot sensitized solar cells with a conversion efficiency exceeding 12. J Phys Chem Lett 8:559–56410.1021/acs.jpclett.6b02864 ↗
5. Muthalif MPA, Sunesh CD, Choe Y (2018) Improved photovoltaic performance of quantum dot-sensitized solar cells based on highly electrocatalytic Ca-doped CuS counter electrodes. J Photochem Photobiol Chem 358:177–18510.1016/j.jphotochem.2018.03.013 ↗
6. Wang W, Feng W, Du J, Xue W, Zhang L, Zhao L, Li Y, Zhong X (2018) Cosensitized quantum dot solar cells with conversion efficiency over 12. Adv Mater 30:1705746. https://doi.org/10.1002/adma.20170574610.1002/adma.201705746 ↗
7. Margraf JT, Ruland A, Sgobba V, Guldi DM, Clark T (2013) Quantum-dot-sensitized solar cells: understanding linker molecules through theory and experiment. Langmuir 29:2434–243810.1021/la3047609 ↗
8. Wang X, Ran L, Dong L, Dong Y, Wang C, Xiong Y (2016) Enhanced full-spectrum water splitting by confining plasmonic Au nanoparticles in N-doped TiO2 bowl nanoarrays. Nano Energy 24:87–9310.1016/j.nanoen.2016.04.013 ↗
9. Wang W, Dong J, Ye X, Li Y, Ma Y, Qi L (2016) Heterostructured TiO2 Nanorod@Nanobowl arrays for efficient photoelectrochemical water splitting. Small 12:1469–147810.1002/smll.201503553 ↗
10. Mehmood U, Harrabi K, Hussein IA, Ahmed S (2017) Enhanced photovoltaic performance of dye-sensitized solar cells using TiO2-graphene microplatelets hybrid photoanode. IEEE J Photovolt 6:196–20110.1109/JPHOTOV.2015.2479468 ↗
11. Li Y, Li W, Zhao L, Ge J, He X, Fang W, Chen H (2019) Constructing micro-flower modified porous TiO2 photoanode for efficient quantum dots sensitized solar cells. J Photochem Photobiol Chem 375:77–8410.1016/j.jphotochem.2019.02.019 ↗
12. Zhou S, Tang R, Li H, Fu L, Li B, Yin L (2019) Fluorescence resonance energy transfer effect enhanced high performance of Si quantum dots/CsPbBr3 inverse opal heterostructure perovskite solar cells. J Power Sources 439:227065. https://doi.org/10.1016/j.jpowsour.2019.22706510.1016/j.jpowsour.2019.227065 ↗
13. Luo D, Chen Q, Qiu Y, Liu B, Zhang M (2019) Carbon dots-decorated Bi2WO6 in an inverse opal film as a photoanode for photoelectrochemical solar energy conversion under visible-light irradiation. Materials 12:1713. https://doi.org/10.3390/ma1210171310.3390/ma12101713 ↗
14. Zhu Y, Tong X, Song H, Wang Y, Qiao Z, Qiu D, Huang J, Lu Z (2018) CsPbBr 3 perovskite quantum dots/ZnO inverse opal electrodes: photoelectrochemical sensing for dihydronicotinamide adenine dinucleotide under visible irradiation. Dalton Trans 47:10057–1006210.1039/C8DT01790E ↗
15. Hori K, Zhang Y, Tusamalee P, Nakazawa N, Yoshihara Y, Wang R, Toyoda T, Hayase S, Shen Q (2018) Interface passivation effects on the photovoltaic performance of quantum dot sensitized inverse opal TiO2 solar cells. Nanomaterials 8:460. https://doi.org/10.3390/nano807046010.3390/nano8070460 ↗
16. Eftekhari E, Broisson P, Nikhil A, Wu Z, Cole IS, Li X, Zhao D, Li Q (2017) Sandwich-structured TiO2 inverse opal circulates slow photons for tremendous improvement in solar energy conversion efficiency. J Mater Chem A 5:12803–1281010.1039/C7TA01703K ↗
17. Liu J, Yao M, Shen L (2019) Third generation photovoltaic cells based on photonic crystals. J Mater Chem C 7:3121–314510.1039/C8TC05461D ↗
18. Oh Y, Yang W, Tan J, Lee H, Park J, Moon J (2019) Boosting visible light harvesting in p-type ternary oxides for solar-to-hydrogen conversion using inverse opal structure. Adv Funct Mater 29:1900194. https://doi.org/10.1002/adfm.20190019410.1002/adfm.201900194 ↗
19. Zhang H, Zhou W, Yang Y, Cheng C (2017) 3D WO3/BiVO4/cobalt phosphate composites inverse opal photoanode for efficient photoelectrochemical water splitting. Small 13:1603840. https://doi.org/10.1002/smll.20160384010.1002/smll.201603840 ↗
20. Lin X, Aumaitre C, Kervella Y, Lapertot G, Rodríguez-Seco C, Palomares E, Demadrille R, Reiss P (2018) Increasing the efficiency of organic dye-sensitized solar cells over 10.3% using locally ordered inverse opal nanostructures in the photoelectrode. Adv Funct Mater 28:1706291. https://doi.org/10.1002/adfm.20170629110.1002/adfm.201706291 ↗
21. Wang Z, Li X, Ling H, Tan CK, Yeo LP, Grimsdale AC, Aiy T (2018) 3D FTO/FTO-Nanocrystal/TiO2 composite inverse opal photoanode for efficient photoelectrochemical water splitting. Small 14:1800395. https://doi.org/10.1002/smll.20180039510.1002/smll.201800395 ↗
22. Qi L, Low ZX, Yi F, Leong S, Zhong Z, Yao J, Hapgood K, Wang H (2014) Direct conversion of two-dimensional ZIF-L film to porous ZnO nano-sheet film and its performance as photoanode in dye-sensitized solar cell. Microporous Mesoporous Mater 194:1–710.1016/j.micromeso.2013.10.009 ↗
23. Kilic B, Turkdogan S (2017) Fabrication of dye-sensitized solar cells using graphene sandwiched 3D-ZnO nanostructures based photoanode and Pt-free pyrite counter electrode. Mater Lett 193:195–19810.1016/j.matlet.2017.01.128 ↗
24. Raj CJ, Karthick SN, Park S, Hemalatha KV, Kim SK, Prabakar K, Kim HJ (2014) Improved photovoltaic performance of CdSe/CdS/PbS quantum dot sensitized ZnO nanorod array solar cell. J Power Sources 248:439–44610.1016/j.jpowsour.2013.09.076 ↗
25. Li S, Zhang P, Chen H, Wang Y, Liu D, Wu J, Sarvari H, Chen ZD (2017) Mesoporous PbI2 assisted growth of large perovskite grains for efficient perovskite solar cells based on ZnO nanorods. J Power Sources 342:990–99710.1016/j.jpowsour.2017.01.024 ↗
26. Feng HL, Wu WQ, Rao HS, Li LB, Kuang DB, Su CY (2015) Three-dimensional hyperbranched TiO2/ZnO heterostructured arrays for efficient quantum dot-sensitized solar cells. J Mater Chem A 3:14826–1483210.1039/C5TA02269J ↗
27. Li Y, Pang A, Wang C, Wei M (2011) Metal-organic frameworks: promising materials for improving the open circuit voltage of dye-sensitized solar cells. J Mater Chem 21:17259–1726410.1039/c1jm12754c ↗
28. Chung HY, Lin CH, Prabu S, Wang HW (2018) Perovskite solar cells using TiO2 layers coated with metal-organic framework material ZIF-8. J Chin Chem Soc 65:1476–148110.1002/jccs.201800173 ↗
29. Gu A, Xiang W, Wang T, Gu S, Zhao X (2017) Enhance photovoltaic performance of tris(2,2′-bipyridine) cobalt(II)/(III) based dye-sensitized solar cells via modifying TiO2 surface with metal-organic frameworks. Sol Energy 147:126–13210.1016/j.solener.2017.03.045 ↗
30. Zhang M, Shang Q, Wan Y, Cheng Q, Liao G, Pan Z (2019) Self-template synthesis of double-shell TiO2@ZIF-8 hollow nanospheres via sonocrystallization with enhanced photocatalytic activities in hydrogen generation. Appl Catal B Environ 241:149–15810.1016/j.apcatb.2018.09.036 ↗
31. Tian P, Shen K, Chen J, Fan T, Fang R, Li Y (2018) Self-templated formation of Pt@ ZIF-8/SiO2 composite with 3D-ordered macropores and size-selective catalytic properties. Small Methods 2:1800219. https://doi.org/10.1002/smtd.20180021910.1002/smtd.201800219 ↗
32. Li Y, Chen C, Sun X, Dou J, Wei M (2015) Metal-organic frameworks at interfaces in dye-sensitized solar cells. Chemsuschem 7:2469–247210.1002/cssc.201402143 ↗
33. Shen K, Zhang L, Chen X, Liu L, Zhang D, Han Y, Chen J, Long J, Luque R, Li Y (2018) Ordered macro-microporous metal-organic framework single crystals. Science 359:206–21010.1126/science.aao3403 ↗
34. Karuturi SK, Liu L, Su LT, Chutinan A, Kherani NP, Chan TK, Osipowicz T, Yoong Tok AI (2011) Gradient inverse opal photonic crystals via spatially controlled template replication of self-assembled opals. Nanoscale 3:4951–495410.1039/c1nr11248a ↗
35. Tsai CW, Langner EHG (2016) The effect of synthesis temperature on the particle size of nano-ZIF-8. Microporous Mesoporous Mater 221:8–1310.1016/j.micromeso.2015.08.041 ↗
36. Ge J, Li W, Zhao L, Li Y, He X, Fang W, Chen H, Zhang F (2019) Constructing cellular network TiO2 photoanode for simultaneous regulation of charge transport and light harvesting properties of quantum dots sensitized solar cells. Ceram Int 45:3715–372210.1016/j.ceramint.2018.11.035 ↗
37. Wang G, Wei H, Shi J, Xu Y, Wu H, Luo Y, Li D, Meng Q (2017) Significantly enhanced energy conversion efficiency of CuInS2 quantum dot sensitized solar cells by controlling surface defects. Nano Energy 35:17–2510.1016/j.nanoen.2017.03.008 ↗
38. Zhou S, Tang R, Yin L (2017) Slow-photon-effect-induced photoelectrical-conversion efficiency enhancement for carbon-quantum-dot-sensitized inorganic CsPbBr3 inverse opal perovskite solar cells. Adv Mater 29:1703682. https://doi.org/10.1002/adma.20170368210.1002/adma.201703682 ↗
39. Lee L (2007) Flat-band potential of a semiconductor: using the Mott–Schottky equation. J Chem Educ 84:685–68810.1021/ed084p685 ↗
40. Hwang I, Yong K (2015) Counter electrodes for quantum-dot-sensitized solar cells. Chemelectrochem 2:634–65310.1002/celc.201402405 ↗
41. Wu M, Lin X, Wang Y, Ma T (2015) Counter electrode materials combined with redox couples in dye- and quantum dot-sensitized solar cells. J Mater Chem A 3:19638–1965610.1039/C5TA03682H ↗
42. Du J, Du Z, Hu JS, Pan Z, Shen Q, Sun J, Long D, Dong H, Sun L, Zhong X (2016) Zn–Cu–In–Se quantum dot solar cells with a certified power conversion efficiency of 116%. J Am Chem Soc 138:4201–420910.1021/jacs.6b00615 ↗