Effect of nanosilica addition on the physicomechanical properties, pore morphology, and phase transformation of freeze cast hydroxyapatite scaffolds
Source abstract
Abstract
Freeze casting technique is a simple and effective method for the fabrication of porous ceramic structures. The objective of this work is to study the production and characterization of hydroxyapatite/nanosilica (HA/nSiO2) scaffolds fabricated through this method. In the experimental procedure, the solidified samples were prepared by slurries containing different concentration of HA and nSiO2 followed by sintering procedure at 1200 and 1350 °C. The phase composition, microstructure, and compressive strength of the scaffolds were characterized by X-ray diffraction, scanning electron microscopy, and mechanical strength test. It was found that the porosity of the scaffolds was in the range of 30–86.5 % and the value of compressive strengths lied between 0.16 and 71.96 MPa which were influenced by nSiO2 content, cooling rate, and sintering temperature. With respect to porosity, pore size, and compressive strength, the scaffolds with 5 % nSiO2, the cooling rate of 1 °C/min and the sintering temperature of 1350 °C showed preferable results for bone tissue engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Facial Trauma and Fracture Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Ohgushi H, Goldberg VM, Caplan AI (1989) Repair of bone defects with marrow cells and porous ceramic: experiments in rats. Acta Orthop 60:334–33910.3109/17453678909149289 ↗
2. Arvidson K, Abdallah BM, Applegate LA, Baldini N, Cenni E, Gomez-Barrena E, Granchi D, Kassem M, Konttinen YT, Mustafa K, Pioletti DP, Sillat T, Finne-Wistrand A (2011) Bone regeneration and stem cells. J Cell Mol Med 15:718–74610.1111/j.1582-4934.2010.01224.x ↗
3. Naderi H, Matin MM, Bahrami AR (2011) Review paper: critical issues in tissue engineering: biomaterials, cell sources, angiogenesis, and drug delivery systems. J Biomater Appl 26:383–41710.1177/0885328211408946 ↗
4. Stevens MM (2008) Biomaterials for bone tissue engineering. Mater Today 11:18–2510.1016/S1369-7021(08)70086-5 ↗
5. Dorozhkin SV (2010) Bioceramics of calcium orthophosphates. Biomaterials 31:1465–148510.1016/j.biomaterials.2009.11.050 ↗
6. Thamaraiselvi TV, Rajeswari S (2004) Biological evaluation of bioceramic materials-a review. Trends Biomater Artif Organs 18:9–17
7. Hesaraki S, Zamanian A, Moztarzadeh F (2009) Effect of adding sodium hexametaphosphate liquefier on basic properties of calcium phosphate cements. J Biomed Mater Res A 88:314–32110.1002/jbm.a.31836 ↗
8. Zamanian A, Moztarzadeh F, Kordestani S, Hesaraki S, Tahriri MR (2010) Novel calcium hydroxide/nanohydroxyapatite composites for dental applications: in vitro study. Adv Appl Ceram 109:440–44510.1179/174367610X12804792635107 ↗
9. Hesaraki S, Zamanian A, Khorami M (2011) Nano-structured apatite granules as drug delivery device for bone infection treatments. J Aust Ceram Soc 47:32–36
10. Hesaraki S, Zamanian A, Nazarian H (2009) Physical and physicochemical evaluation of calcium phosphate cement made using human derived blood plasma. Adv Appl Ceram 108:253–26010.1179/174367609X368802 ↗
11. Sung Y-M, Shin Y-K, Ryu J-J (2007) Preparation of hydroxyapatite/zirconia bioceramic nanocomposites for orthopaedic and dental prosthesis applications. Nanotechnology 18:06560210.1088/0957-4484/18/6/065602 ↗
12. Evis Z, Doremus RH (2007) A study of phase stability and mechanical properties of hydroxylapatite–nanosize α-alumina composites. Mater Sci Eng C 27:421–42510.1016/j.msec.2006.05.028 ↗
13. Li X, Yasuda H, Umakoshi Y (2006) Bioactive ceramic composites sintered from hydroxyapatite and silica at 1200°C: preparation, microstructures and in vitro bone-like layer growth. J Mater Sci Mater Med 17:573–58110.1007/s10856-006-8942-2 ↗
14. Fidancevska E, Ruseska G, Bossert J, Lin Y-M, Boccaccini AR (2007) Fabrication and characterization of porous bioceramic composites based on hydroxyapatite and titania. Mater Chem Phys 103:95–10010.1016/j.matchemphys.2007.01.015 ↗
15. Muralithran G, Ramesh S (2000) The effects of sintering temperature on the properties of hydroxyapatite. Ceram Int 26:221–23010.1016/S0272-8842(99)00046-2 ↗
16. Huaxia JI, Marqius PM (1993) Sintering behaviour of hydroxyapatite reinforced with 20 wt% Al2O3. J Mater Sci 28:1941–1945. doi: 10.1007/BF0059576710.1007/BF00595767 ↗
17. Sayer M, Stratilatov AD, Reid J, Calderin L, Stott MJ, Yin X, MacKenzie M, Smith TJN, Hendry JA, Langstaff SD (2003) Structure and composition of silicon-stabilized tricalcium phosphate. Biomaterials 24:369–38210.1016/S0142-9612(02)00327-7 ↗
18. Miao X, Lim W-K, Huang X, Chen Y (2005) Preparation and characterization of interpenetrating phased TCP/HA/PLGA composites. Mater Lett 59:4000–400510.1016/j.matlet.2005.07.062 ↗
19. Ji H, Marquis PM (1992) Preparation and characterization of Al2O3 reinforced hydroxyapatite. Biomaterials 13:744–74810.1016/0142-9612(92)90011-C ↗
20. Evis Z, Ergun C, Doremus RH (2005) Hydroxylapatite–zirconia composites: thermal stability of phases and sinterability as related to the CaO–ZrO2 phase diagram. J Mater Sci 40:1127–1134. doi: 10.1007/s10853-005-6928-y10.1007/s10853-005-6928-y ↗
21. Guo H, Khor KA, Boey YC, Miao X (2003) Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering. Biomaterials 24:667–67510.1016/S0142-9612(02)00381-2 ↗
22. Juang HY, Hon MH (1994) Fabrication and mechanical properties of hydroxyapatite–alumina composites. Mater Sci Eng C 2:77–8110.1016/0928-4931(94)90033-7 ↗
23. An SH, Matsumoto T, Miyajima H, Nakahira A, Kim KH, Imazato S (2012) Porous zirconia/hydroxyapatite scaffolds for bone reconstruction. Dent Mater 28:1221–123110.1016/j.dental.2012.09.001 ↗
24. Blindow S, Pulkin M, Koch D, Grathwohl G, Rezwan K (2009) Hydroxyapatite/SiO2 composites via freeze casting for bone tissue engineering. Adv Eng Mater 11:875–88410.1002/adem.200900208 ↗
25. Porter AE, Patel N, Skepper JN, Best SM, Bonfield W (2004) Effect of sintered silicate-substituted hydroxyapatite on remodelling processes at the bone–implant interface. Biomaterials 25:3303–331410.1016/j.biomaterials.2003.10.006 ↗
26. Patel N, Brooks RA, Clarke MT, Lee PMT, Rushton N, Gibson IR, Best SM, Bonfield W (2005) In vivo assessment of hydroxyapatite and silicate-substituted hydroxyapatite granules using an ovine defect model. J Mater Sci Mater Med 16:429–44010.1007/s10856-005-6983-6 ↗
27. Andrade JC, Camilli JA, Kawachi EY, Bertran CA (2002) Behavior of dense and porous hydroxyapatite implants and tissue response in rat femoral defects. J Biomed Mater Res 62:30–3610.1002/jbm.10242 ↗
28. Patel N, Best SM, Bonfield W, Gibson IR, Hing KA, Damien E, Revell PA (2002) A comparative study on the in vivo behavior of hydroxyapatite and silicon substituted hydroxyapatite granules. J Mater Sci Mater Med 13:1199–120610.1023/A:1021114710076 ↗
29. Sopyan I, Fadli A, Mel M (2012) Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. J Mech Behav Biomed Mater 8:86–9810.1016/j.jmbbm.2011.10.012 ↗
30. Deville S (2010) Freeze-casting of porous biomaterials: structure, properties and opportunities. Materials 3:1913–192710.3390/ma3031913 ↗
31. Hutmacher DW (2000) Scaffolds in tissue engineering bone and cartilage. Biomaterials 21:2529–254310.1016/S0142-9612(00)00121-6 ↗
32. Fook MVL, Fidéles T, Fook A, Aparecida A, Costa R (2009) Porous hydroxyapatite scaffolds by polymer sponge method. Key Eng Mater 396:703–70610.4028/www.scientific.net/KEM.396-398.703 ↗
33. Chopra K, Mummery P, Derby B, Gough J (2012) Gel-cast glass–ceramic tissue scaffolds of controlled architecture produced via stereolithography of moulds. Biofabrication 4:04500210.1088/1758-5082/4/4/045002 ↗
34. Zhang Y, Yokogawa Y, Feng X, Tao Y, Li Y (2010) Preparation and properties of bimodal porous apatite ceramics through slip casting using different hydroxyapatite powders. Ceram Int 36:107–11310.1016/j.ceramint.2009.07.008 ↗
35. Dìaz A, Hampshire S (2004) Characterisation of porous silicon nitride materials produced with starch. J Eur Ceram Soc 24:413–41910.1016/S0955-2219(03)00212-7 ↗
36. Agrawal DK (1998) Microwave processing of ceramics. Curr Opin Solid State Mater Sci 3:480–48510.1016/S1359-0286(98)80011-9 ↗
37. Farhangdoust S, Zamanian A, Yasaei M, Khorami M (2013) The effect of processing parameters and solid concentration on the mechanical and microstructural properties of freeze-casted macroporous hydroxyapatite scaffolds. Mater Sci Eng C 33:453–46010.1016/j.msec.2012.09.013 ↗
38. Deville S (2008) Freeze-casting of porous ceramics: a review of current achievements and issues. Adv Eng Mater 10:155–16910.1002/adem.200700270 ↗
39. Arabi N, Zamanian A (2013) Effect of cooling rate and gelatin concentration on the microstructural and mechanical properties of ice template gelatin scaffolds. Biotechnol Appl Biochem 60:573–57910.1002/bab.1120 ↗
40. Zamanian A, Farhangdoust S, Yasaei M, Khorami M, Hafezi M (2014) The effect of particle size on the mechanical and microstructural properties of freeze-casted macroporous hydroxyapatite scaffolds. Int J Appl Ceram Technol 11:12–2110.1111/ijac.12031 ↗
41. Wegst UG, Schecter M, Donius AE, Hunger PM (2010) Biomaterials by freeze casting. Philos Trans R Soc Lond A 368:2099–212110.1098/rsta.2010.0014 ↗
42. Zhang Y, Zuo K, Zeng Y-P (2009) Effects of gelatin addition on the microstructure of freeze-cast porous hydroxyapatite ceramics. Ceram Int 35:2151–215410.1016/j.ceramint.2008.11.022 ↗
43. Ghazanfari SMH, Zamanian A (2013) Phase transformation, microstructural and mechanical properties of hydroxyapatite/alumina nanocomposite scaffolds produced by freeze casting. Ceram Int 39:9835–984410.1016/j.ceramint.2013.05.096 ↗
44. Mallick KK (2009) Freeze casting of porous bioactive glass and bioceramics. J Am Ceram Soc 92:S85–S9410.1111/j.1551-2916.2008.02784.x ↗
45. Heunisch A, Dellert A, Roosen A (2010) Effect of powder, binder and process parameters on anisotropic shrinkage in tape cast ceramic products. J Eur Ceram Soc 30:3397–340610.1016/j.jeurceramsoc.2010.08.012 ↗
46. Santos DS, Lopes FS, Ferreira DC, Manuela C (2009) Hydroxyapatite, biocompatible glass and silicon-based bone substitute, production process and applications of thereof. WO Patent 2,009,126,054
47. Liao C-J, Lin F-H, Chen K-S, Sun J-S (1999) Thermal decomposition and reconstitution of hydroxyapatite in air atmosphere. Biomaterials 20:1807–181310.1016/S0142-9612(99)00076-9 ↗
48. Phillips B, Muan A (1959) Phase equilibria in the system CaO–iron oxide–SiO2, in air. J Am Ceram Soc 42:413–42310.1111/j.1151-2916.1959.tb12966.x ↗
49. Reid JW, Pietak A, Sayer M, Dunfield D, Smith TJN (2005) Phase formation and evolution in the silicon substituted tricalcium phosphate/apatite system. Biomaterials 26:2887–289710.1016/j.biomaterials.2004.09.005 ↗
50. Jaworski R, Pierlot C, Pawlowski L, Bigan M, Quivrin M (2008) Synthesis and preliminary tests of suspension plasma spraying of fine hydroxyapatite powder. J Therm Spray Technol 17:679–68410.1007/s11666-008-9220-2 ↗
51. Deville S, Saiz E, Tomsia AP (2007) Ice-templated porous alumina structures. Acta Mater 55:1965–197410.1016/j.actamat.2006.11.003 ↗
52. Deville S, Saiz E, Tomsia AP (2006) Freeze casting of hydroxyapatite scaffolds for bone tissue engineering. Biomaterials 27:5480–548910.1016/j.biomaterials.2006.06.028 ↗
53. Deville S, Maire E, Lasalle A, Bogner A, Gauthier C, Leloup J, Guizard C (2010) Influence of particle size on ice nucleation and growth during the ice-templating process. J Am Ceram Soc 93:2507–251010.1111/j.1551-2916.2010.03840.x ↗
54. Zheng W (2011) Preparation and characterisation of tri-calcium phosphate scaffolds with tunnel-like macro-pores for bone tissue engineering. Master Dissertation, Queensland University of Technology
55. Zhang Y, Zhou K, Bao Y, Zhang D (2013) Effects of rheological properties on ice-templated porous hydroxyapatite ceramics. Mater Sci Eng C 33:340–34610.1016/j.msec.2012.08.048 ↗
56. Le Huec JC, Schaeverbeke T, Clement D, Faber J, Le Rebeller A (1995) Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress. Biomaterials 16:113–11810.1016/0142-9612(95)98272-G ↗
57. Itala AI, Ylanen HO, Ekholm C, Karlsson KH, Aro HT (2001) Pore diameter of more than 100 micron is not requisite for bone ingrowth in rabbits. J Biomed Mater Res 58:679–68310.1002/jbm.1069 ↗
58. Klawitter JJ, Bagwell JG, Weinstein AM, Sauer BW (1976) An evaluation of bone growth into porous high density polyethylene. J Biomed Mater Res 10:311–32310.1002/jbm.820100212 ↗
59. Hench LL, Wilson J (1993) An introduction to bioceramics. World Scientific, Singapore, pp 12–2610.1142/2028 ↗