Mn2O3 porous microsheets prepared by a chemical precipitation method as an effective electrochemical sensor for non-enzymatic glucose detection
Source abstract
Abstract
To conveniently construct an electrochemical non-enzymatic glucose sensor, Mn2O3 porous microsheets are utilized as electrode materials in glucose detection. Mn2O3 porous microsheets have been prepared by a facile chemical precipitation procedure. The Mn2O3 porous microsheets possess a uniform porous structure, which display a nitrogen adsorption–desorption surface area of 38.6 m2/g and the average pore diameter of 16.0 nm. The pores on the Mn2O3 porous microsheets afford large specific surface area. Electrochemical tests reveal that the Mn2O3 porous microsheets electrode possesses a remarkable capability in glucose detection. Mn2O3 porous microsheets electrode shows a wide response range (20 ~ 1.90 mM) and a high glucose detection sensitivity up to 6000 μA mM−1 cm−2. Moreover, the value of detection limit is 12 μM (S/N = 3). The anti-interference and stability tests prove that the Mn2O3 porous microsheets electrode possesses satisfactory selectivity and excellent stability. These results indicate the Mn2O3 porous microsheets electrode is potential for developing the non-enzymatic detecting devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Conducting polymers and applications · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Newman JD, Turner AP (2005) Home blood glucose biosensors: a commercial perspective. Biosens Bioelectron 20:2435–245310.1016/j.bios.2004.11.012 ↗
2. Hwang DW, Lee S, Seo M, Chung TD (2018) Recent advances in electrochemical non-enzymatic glucose sensors-a review. Anal Chim Acta 1033:1–3410.1016/j.aca.2018.05.051 ↗
3. Zhao Y, Bo XJ, Guo LP (2015) Highly exposed copper oxide supported on three-dimensional porous reduced graphene oxide for non-enzymatic detection of glucose. Electrochim Acta 176:1272–127910.1016/j.electacta.2015.07.143 ↗
4. Wang GF, He XP, Wang LL et al (2013) Non-enzymatic electrochemical sensing of glucose. Microchim Acta 180:161–18610.1007/s00604-012-0923-1 ↗
5. Qiu HW, Xu SC, Jiang SZ et al (2015) A novel graphene-based tapered optical fiber sensor for glucose detection. Appl Surf Sci 329:390–39510.1016/j.apsusc.2014.12.093 ↗
6. Archana V, Xia Y, FangGnana Kumar RYG (2019) Hierarchical CuO/NiO-carbon nanocomposite derived from metal organic framework on cello tape for the flexible and high performance nonenzymatic electrochemical glucose sensors. ACS Sustain Chem Eng 7:6707–671910.1021/acssuschemeng.8b05980 ↗
7. Khun K, Ibupoto ZH, Lu J et al (2012) Potentiometric glucose sensor based on the glucose oxidase immobilized iron ferrite magnetic particle/chitosan composite modified gold coated glass electrode. Sens Actuators B 173:698–70310.1016/j.snb.2012.07.074 ↗
8. Kang BC, Park BS, Ha TJ (2019) Highly sensitive wearable glucose sensor systems based on functionalized single-wall carbon nanotubes with glucose oxidase-nafion composites. Appl Surf Sci 470:13–1810.1016/j.apsusc.2018.11.101 ↗
9. Balasubramanian P, Annalakshmi M, Chen S-M, Chen T-W (2019) Ultrasensitive non-enzymatic electrochemical sensing of glucose in noninvasive samples using interconnected nanosheets-like NiMnO3 as a promising electrocatalyst. Sens Actuators B. 299:12697410.1016/j.snb.2019.126974 ↗
10. Li HB, Zhao P (2019) Amorphous Ni–Co–Fe hydroxide nanospheres for the highly sensitive and selective non-enzymatic glucose sensor applications. J Alloy Compd 800:261–27110.1016/j.jallcom.2019.05.264 ↗
11. Bao CC, Niu QQ, Cao XW, Liu C, Wang H, Lu WB (2019) Ni–Fe hybrid nanocubes: an efficient electrocatalyst for non-enzymatic glucose sensing with a wide detection range. New J Chem 43:11135–1114010.1039/C9NJ01792E ↗
12. Han L, Zhang S, Han L, Yang D-P, Hou CT, Liu AH (2014) Porous gold cluster film prepared from Au@BSA microspheres for electrochemical nonenzymatic glucose sensor. Electrochim Acta 138:109–11410.1016/j.electacta.2014.06.095 ↗
13. Zhang JC, Xu CY, Zhang RC et al (2018) Solvothermal synthesis of cobalt tungstate microrings for enhanced nonenzymatic glucose sensor. Mater Lett 210:291–29410.1016/j.matlet.2017.09.050 ↗
14. Zhang Y, Liu YQ, Bai Y, Chu W, Sh J (2020) Confinement preparation of hierarchical NiO-N-doped carbon@reduced graphene oxide microspheres for high-performance non-enzymatic detection of glucose. Sens Actuators B. 309:12777910.1016/j.snb.2020.127779 ↗
15. Yang J, Cho M, Lee Y (2016) Synthesis of hierarchical Ni(OH)2 hollow nanorod via chemical bath deposition and its glucose sensing performance. Sens Actuators B 222:674–68110.1016/j.snb.2015.08.119 ↗
16. Li ZY, Shaheer Akhtar M, Bui PTM, Yang OB (2017) Predominance of two dimensional (2D) Mn2O3 nanowalls thin film for high performance electrochemical supercapacitors. Chem Eng J 330:1240–124710.1016/j.cej.2017.08.060 ↗
17. Xiao XL, Lu J, Li YD (2010) LiMn2O4 microspheres: synthesis, characterization and use as a cathode in lithium ion batteries. Nano Res 3:733–73710.1007/s12274-010-0037-1 ↗
18. Jiang J, Li Y, Liu J, Huang X, Yuan C, Lou XW (2012) Recent advances in metal oxide-based electrode architecture design for electrochemical energy storage. Adv Mater 24:5166–518010.1002/adma.201202146 ↗
19. Gumilar G, Kaneti YV, Henzie J et al (2020) General synthesis of hierarchical sheet/plate-like M-BDC (M=Cu, Mn, Ni, and Zr) metal-organic frameworks for electrochemical non-enzymatic glucose sensing. Chem Sci 11:364410.1039/C9SC05636J ↗
20. Pérez-Garibay R, González-García AP, Fuentes-Aceituno JC, Rendón-Ángeles JC, Bello-Teodoro S (2016) Synthesis of Mn2O3 from manganese sulfated leaching solutions. Ind Eng Chem Res 55:9468–947510.1021/acs.iecr.6b02301 ↗
21. Park S, Boo H, Chung TD (2006) Electrochemical non-enzymatic glucose sensors. Anal Chim Acta 556:46–5710.1016/j.aca.2005.05.080 ↗
22. Liu XY, Shi SJ, Xiong QQ et al (2013) Hierarchical NiCo2O4@NiCo2O4 core/shell nanoflake arrays as high-performance supercapacitor materials. ACS Appl Mater Interfaces 5:8790–879510.1021/am402681m ↗
23. Xia KD, Yang C, Chen YL et al (2017) In situ fabrication of Ni(OH)2 flakes on Ni foam through electrochemical corrosion as high sensitive and stable binder-free electrode for glucose sensing. Sens Actuators B 240:979–98710.1016/j.snb.2016.09.077 ↗
24. Ci S, Huang T, Wen Z et al (2014) Nickel oxide hollow microsphere for non-enzyme glucose detection. Biosens Bioelectron 54:251–25710.1016/j.bios.2013.11.006 ↗
25. Xu JS, Sun YD, Lu MJ et al (2017) Fabrication of porous Mn2O3 microsheet arrays on nickel foam as high–rate electrodes for supercapacitors. J Alloy Compd 717:108–11510.1016/j.jallcom.2017.04.239 ↗
26. Li XL, Yao JY, Liu FL et al (2013) Nickel/Copper nanoparticles modified TiO2 nanotubes for non-enzymatic glucose biosensors. Sens Actuators B 181:501–50810.1016/j.snb.2013.02.035 ↗
27. Tong Y, Xu J, Jiang H, Gao F, Lu Q (2017) One-step synthesis of novel Cu@polymer nanocomposites through a self-activated route and their application as nonenzymatic glucose sensors. Dalton T 46:9918–992410.1039/C7DT01931A ↗
28. Naik KK, Gangan A, Chakraborty B, Nayak SK, Rout CS (2017) Enhanced nonenzymatic glucose-sensing properties of electrodeposited NiCo2O4-Pd nanosheets: experimental and DFT investigations. ACS Appl Mater Interfaces 9:23894–2390310.1021/acsami.7b02217 ↗
29. Xu D, Zhu CL, Meng X et al (2018) Design and fabrication of Ag-CuO nanoparticles on reduced graphene oxide for nonenzymatic detection of glucose. Sens Actuators B 265:435–44210.1016/j.snb.2018.03.086 ↗
30. Xiao F, Li YQ, Gao HC, Ge SB, Duan HW (2013) Growth of coral-like PtAu-MnO2 binary nanocomposites on free-standing graphene paper for flexible nonenzymatic glucose sensors. Biosens Bioelectron 41:417–42310.1016/j.bios.2012.08.062 ↗
31. Farid MM, Goudini L, Piri F, Zamani A, Saadati F (2016) Molecular imprinting method for fabricating novel glucose sensor: polyvinyl acetate electrode reinforced by MnO2/CuO loaded on graphene oxide nanoparticles. Food Chem 194:61–6710.1016/j.foodchem.2015.07.128 ↗
32. Guo CY, Li H, Zhang X, Huo HH, Xu CL (2015) 3D porous CNT/MnO2 composite electrode for high-performance enzymeless glucose detection and supercapacitor application. Sens Actuators B 206:407–41410.1016/j.snb.2014.09.058 ↗
33. Yang SL, Liu LX, Wang GF, Li G, Deng DH, Qu LB (2015) One-pot synthesis of Mn3O4 nanoparticles decorated with nitrogen-doped reduced graphene oxide for sensitive nonenzymatic glucose sensing. J Electroanal Chem 755:15–2110.1016/j.jelechem.2015.07.021 ↗
34. Mary AJC, Shalini SS, Balamurugan R, Harikrishnan MP, Bose AC (2020) Supercapacitor and non-enzymatic biosensor application of an Mn2O3/NiCo2O4 composite material. New J Chem 44:11316–1132310.1039/D0NJ01942A ↗
35. Sinha L, Pakhira S, Bhojane P, Mali S, Hong CK, Shirage PM (2018) Hybridization of Co3O4 and α-MnO2 nanostructures for high-performance nonenzymatic glucose sensing. ACS Sustain Chem Eng 6:13248–1326110.1021/acssuschemeng.8b02835 ↗
36. Dong CJ, Tao Y, Chang Q et al (2018) Direct growth of MnCO3 on Ni foil for a highly sensitive nonenzymatic glucose sensor. J Alloy Compd 762:216–22110.1016/j.jallcom.2018.05.193 ↗
37. Yang SL, Li G, Wang GF, Zhao JH, Gao XH, Qu LB (2015) Synthesis of Mn3O4 nanoparticles/nitrogen-doped graphene hybrid composite for nonenzymatic glucose sensor. Sens Actuators B 221:172–17810.1016/j.snb.2015.06.110 ↗
38. Zhang C, Ni HW, Chen RS et al (2015) Enzyme-free glucose sensing based on Fe3O4 nanorod arrays. Microchim Acta 182:1811–181810.1007/s00604-015-1511-y ↗
39. Luo Z, Yin S, Wang K et al (2012) Synthesis of one-dimensional β-Ni(OH)2 nanostructure and their application as nonenzymatic glucose sensors. Mater Chem Phys 132:387–39410.1016/j.matchemphys.2011.11.041 ↗
40. Ramachandran K, Raj Kumar T, Babu KJ, Gnana Kumar G (2016) Ni-Co bimetal nanowires filled multiwalled carbon nanotubes for the highly sensitive and selective non-enzymatic glucose sensor applications. Sci Rep 6:3658310.1038/srep36583 ↗
41. Ahmad R, Tripathy N, Ahn MS et al (2017) Highly efficient non-enzymatic glucose sensor based on CuO modified vertically-grown ZnO nanorods on electrode. Sci Rep 7:571510.1038/s41598-017-06064-8 ↗