Effect of epoxy impregnation on characterizing microstructure and micromechanical properties of concrete by different techniques
Source abstract
Abstract
Investigation of the microscopic properties of cement concrete requires well-prepared samples with a flat and undamaged surface. The epoxy impregnation in concrete sample can prevent damage to the microstructure during polishing process for obtaining the flat surface. However, further exploration about the effect of epoxy impregnation on characterizing the properties of concrete has not been found. In this paper, the vacuum impregnation method is adopted to prepare the epoxy impregnated concrete and paste samples. The aspects of microscopic properties of impregnated and non-impregnated samples are evaluated and compared in terms of the surface elevation, the indentation modulus, and the thickness of the interfacial transition zone between the aggregate and the paste matrix (ITZagg-paste) as well as that between the residual C3S clinker and the hydration product (ITZC3S-HP). The techniques of optical microscope, backscattered electron microscope, scanning probe microscope (SPM) modulus mapping, and the instrumented indentation are adopted to measure the above microproperties. The results show that the epoxy impregnation is favoured in the microscope image analysis, nanoindentation measurement, and characterizing the ITZC3S-HP by SPM modulus mapping. It is not recommended for characterizing the thickness of ITZagg-paste by SPM modulus mapping and for measuring the micromechanical properties at the paste scale by microindentation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Balooch G, Marshall GW, Marshall SJ, Warren OL, Asif SS, Balooch M (2004) Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth. J Biomech 37(8):1223–123210.1016/j.jbiomech.2003.12.012 ↗
2. Bernard O, Ulm FJ, Lemarchand E (2003) A multiscale micromechanics-hydration model for the early-age elastic properties of cement based materials. Cem Concr Res 33(9):1293–130910.1016/S0008-8846(03)00039-5 ↗
3. Bisschop J, Van Mier JGM (2002) How to study drying shrinkage microcracking in cement-based materials using optical and scanning electron microscopy. Cem Concr Res 32(2):279–28710.1016/S0008-8846(01)00671-8 ↗
4. Diamond S, Bonen D (1993) Microstructure of hardened cement paste—a new interpretation. J Am Ceram Soc 76(12):2993–299910.1111/j.1151-2916.1993.tb06600.x ↗
5. Diamond S, Huang J (2001) The ITZ in concrete–a different view based on image analysis and SEM observations. Cem Concr Compos 23(2):179–18810.1016/S0958-9465(00)00065-2 ↗
6. Elsharief A, Cohen MD, Olek J (2003) Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone. Cem Concr Res 33(11):1837–184910.1016/S0008-8846(03)00205-9 ↗
7. Jennings HM (2008) Refinements to colloid model of CSH in cement: CM-II. Cem Concr Res 38(3):275–28910.1016/j.cemconres.2007.10.006 ↗
8. Kjellsen KO, Monsoy A, Isachsen K, Detwiler RJ (2003) Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation. Cem Concr Res 33(4):611–61610.1016/S0008-8846(02)01029-3 ↗
9. Kjellsen KO, Justnes H (2004) Revisiting the microstructure of hydrated tricalcium silicate—a comparison to Portland cement. Cem Concr Compos 26(8):947–95610.1016/j.cemconcomp.2004.02.030 ↗
10. Liang SM, Wei Y, Gao X (2017) Strain-rate sensitivity of cement paste by microindentation continuous stiffness measurement: Implication to isotache approach for creep modeling. Cem Concr Res 100:84–9510.1016/j.cemconres.2017.05.023 ↗
11. Liang S, Wei Y, Wu Z (2017) Multiscale modeling elastic properties of cement-based materials considering imperfect interface effect. Constr Build Mater 154:567–57910.1016/j.conbuildmat.2017.07.196 ↗
12. Liao KY, Chang PK, Peng YN, Yang CC (2004) A study on characteristics of interfacial transition zone in concrete. Cem Concr Res 34(6):977–98910.1016/j.cemconres.2003.11.019 ↗
13. Scrivener KL, Crumbie AK, Laugesen P (2004) The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. Interf. Sci. 12(4):411–42110.1023/B:INTS.0000042339.92990.4c ↗
14. Struble L, Stutzman P (1989) Epoxy impregnation of hardened cement for microstructural characterization. J Mater Sci Lett 8(6):632–63410.1007/BF01730426 ↗
15. Stutzman PE, Clifton JR (1999) Specimen preparation for scanning electron microscopy. Proceedings of the international conference on cement microscopy, International cement microscopy association 21:10–22
16. Vandamme M, Ulm FJ, Fonollosa P (2010) Nanogranular packing of C-S–H at substochiometric conditions. Cem Concr Res 40(1):14–2610.1016/j.cemconres.2009.09.017 ↗
17. Wei Y, Gao X, Liang SM (2018) A combined SPM/NI/EDS method to quantify properties of inner and outer CSH in OPC and slag-blended cement pastes. Cem. Concr. Compos. 85:56–6610.1016/j.cemconcomp.2017.09.017 ↗
18. Wei Y, Liang SM, Gao X (2017) Phase quantification in cementitious materials by dynamic modulus mapping. Mater Charact 127:348–35610.1016/j.matchar.2017.02.029 ↗
19. Wong HS, Buenfeld NR (2006) Patch microstructure in cement-based materials: fact or artefact. Cem Concr Res 36(5):990–99710.1016/j.cemconres.2006.02.008 ↗
20. Wong HS, Head MK, Buenfeld NR (2006) Pore segmentation of cement-based materials from backscattered electron images. Cem Concr Res 36(6):1083–109010.1016/j.cemconres.2005.10.006 ↗
21. Xu J, Corr DJ, Shah SP (2015) Nanomechanical properties of CSH gel/cement grain interface by using nanoindentation and modulus mapping. J Zhejiang Univ Sci A 16(1):38–4610.1631/jzus.A1400166 ↗
22. Yio MHN, Phelan JC, Wong HS, Buenfeld NR (2014) Determining the slag fraction, water/binder ratio and degree of hydration in hardened cement pastes. Cem Concr Res 56:171–18110.1016/j.cemconres.2013.12.002 ↗
23. Zhu W, Fonteyn MTJ, Hughes J, Pearce C (2009) Nanoindentation study of resin impregnated sandstone and early-age cement paste specimens. Nanotechnol Construct 3:403–40810.1007/978-3-642-00980-8_55 ↗