Morphology, mechanical and thermal properties of nano-structured full IPNs based on polyisoprene and PMMA
Source abstract
Abstract
Morphology, mechanical properties, thermal stability and gas transport behaviour of interpenetrating polymer networks (IPNs) based on PI/PMMA have been investigated using various techniques. Crosslinking level of both phases and concentration of PMMA were found to have noticeable effects on the compatibility of immiscible components during IPN formation. Effect of crosslinking was studied by preparing IPNs with varying amount of crosslinker concentration in each phase. Crosslinking of both phases facilitated deeper interpenetrations between both networks, and certain degree of compatibility is attained during IPN formation. Nanometre-sized domains were observed for highly crosslinked IPN. Lower concentration of PMMA was found to favour phase mixing more effectively than others. DSC curve of 65/35 IPN showed a broad transition arising from the α and β-relaxations of PMMA due to the higher flexibility attained by mixing with the highly mobile PI chains. The mechanical properties of the IPNs were correlated to the morphology of the system and 50/50 composition showed maximum mechanical properties among the studied compositions. Mode of mechanical failure, thermal stability and gas transport behaviour were also analysed. IPNs having nanometre-sized domains showed least gas permeability among the studied samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Lipatov SY, Alekseeva TT (2007) Adv Polym Sci 208:110.1007/12_2007_116 ↗
2. Sperling LH (1981) Interpenetrating polymer networks and related materials. Plenum Press, New York10.1007/978-1-4684-3830-7 ↗
3. Huelck V, Thomas DA, Sperling LH (1972) Macromolecules 5:34010.1021/ma60028a002 ↗
4. Donatelli AA, Sperling LH, Thomas DA (1975) Macromolecules 9:67110.1021/ma60052a029 ↗
5. Widmaier JM, Sperling LH (1981) Macromolecules 15:62510.1021/ma00230a081 ↗
6. Donatelli AA, Sperling LH, Thomas DA (1977) J Appl Polym Sci 21:118910.1002/app.1977.070210503 ↗
7. Yeo JK, Sperling LH, Thomas DA (1982) Polym Eng Sci 22:19010.1002/pen.760220309 ↗
8. Fradkin DG, Foster NJ, Sperling LH, Thomas DA (1996) Polym Eng Sci 26:73010.1002/pen.760261104 ↗
9. Duenas JMM, Escuriola DT, Ferrer GG, Pradas MM, Ribelles JLG, Pissis P, Kyritsis A (2001) Macromolecules 34:552510.1021/ma002046i ↗
10. Sanchez MS, Ferrer GG, Cabanilles CT, Duenas JMM, Pradas MM, Ribelles JLG (2001) Polymer 42:1007110.1016/S0032-3861(01)00530-4 ↗
11. Alves NM, Ribelles JLG, Tejedor JAG, Mano JF (2004) Macromolecules 37:373510.1021/ma035626z ↗
12. Mathew AP (2001) PhD thesis, Mahatma Gandhi University
13. John J, Nagarajan S, Suryakala R, Klepac D, Yang W, Valic S, Pius A, Thomas S, J Poly Sci Part B (manuscript submitted)
14. Wang M, Paramoda KP, Goh SH (2004) Chem Mater 16:345210.1021/cm049653v ↗
15. Rohman G, Grande D, Laupretre F, Boilean S, Guerin P (2005) Macromolecules 38:727410.1021/ma0501390 ↗
16. Pionteck J, Hu J, Schulze U (2003) J Appl Polym Sci 89:197610.1002/app.12414 ↗
17. Mathew AP, Packirisamy S, Thomas S (2000) J Appl Polym Sci 78:232710.1002/1097-4628(20001220)78:13<2327::AID-APP100>3.0.CO;2-0 ↗
18. Mathew AP, Packirisamy S, Radusch HJ, Thomas S (2001) Eur Polym J 37:192110.1016/S0014-3057(01)00067-2 ↗
19. John J, Klepac D, Didovic M, Sandesh CJ, Liu Y, Raju KVSN, Pius A, Valic S, Thomas S, Polymer (manuscript communicated)
20. Canto LB, Torriani IL, Plivelic TS, Hage E Jr, Pessan LA (2007) Polym Int 56:30810.1002/pi.2116 ↗