Highly conductive paper fabricated with multiwalled carbon nanotubes and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) by unidirectional drying
Source abstract
Abstract
Poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) was used to directly disperse multiwalled carbon nanotubes (MWNTs) into a stable solution without the aid of any other surfactants. The solution was coated onto paper substrates and was subsequently dried via two different methods: conventional multidirectional drying and a special unidirectional drying method with the aid of a ceramic heating board. The samples that were dried using the unidirectional drying method had a lower resistance than when dried with the conventional drying method, which allowed it to have a better conductivity. For solutions containing 1–4 mg/mL MWNTs, which were dispersed with 1 mg/mL PEDOT:PSS, the measured conductivity ranged from 21 ± 0.5 to 46 ± 10 S/cm. These values are one to three orders of magnitude higher than those obtained for MWNT films often reported in the literature as well as for films we fabricated using MWNTs dispersed with SDBS, or PEDOT:PSS solution by itself. AFM and SEM images showed that the surface of MWNTs films made with PEDOT:PSS as a surfactant was very smooth and the layers tended to be thinner than when made with the other surfactants. It was demonstrated using FTIR analysis that the MWNTs become part of the 3D structure of the paper substrate material because chemical bonding between the PEDOT:PSS, the MWNTs and the paper fibers occurred during the drying stage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Roberts JC (1996) Paper chemistry. Springer, New York
2. Agarwal M, Lvov Y, Varahramyan K (2006) Nanotechnology 17:531910.1088/0957-4484/17/21/006 ↗
3. Hu LB, Choi JW, Yang Y, Jeong S, Mantia FL, Cui LF, Cui Y (2009) Proc Natl Acad Sci USA 22:2149010.1073/pnas.0908858106 ↗
4. Martinez AW, Phillips ST, Whitesides GM (2008) Proc Natl Acad Sci USA 105:1960610.1073/pnas.0810903105 ↗
5. Werner O, Quan C, Turner C, Pettersson B, Wagberg L (2010) Cellulose 17:18710.1007/s10570-009-9374-1 ↗
6. Zou JH, Chen H, Chunder A, Yu YX, Huo Q, Zhai L (2008) Adv Mater 20:333710.1002/adma.200703094 ↗
7. Huang LH, Chen KF, Lin CX, Gerhardt RA (2011) J Mater Sci 46:2600. doi:https://doi.org/10.1007/s10853-010-5112-110.1007/s10853-010-5112-1 ↗
8. Li X, Tian JF, Garnier G, Shen W (2010) Colloid Surf B 76:56410.1016/j.colsurfb.2009.12.023 ↗
9. Rida A, Yang L, Vyas R, Tentzeris MM (2009) IEEE Antennas Propag 51:1310.1109/MAP.2009.5251188 ↗
10. Fukahori S, Iguchi Y, Ichiura H, Kitaoka T, Tanaka H, Wariishi H (2007) Chemosphere 66:213610.1016/j.chemosphere.2006.09.022 ↗
11. Sarrazin P, Valecce L, Beneventi D, Chaussy D, Vurth L, Stephan O (2007) Adv Mater 19:329110.1002/adma.200700814 ↗
12. Agarwal M, Xing Q, Shim BS, Kotov N, Varahramyan K, Lvow Y (2009) Nanotechnology 20:110.1088/0957-4484/20/21/215602 ↗
13. Peng CQ, Thio YS, Gerhardt RA (2008) Nanotechnology 19:50560310.1088/0957-4484/19/50/505603 ↗
14. Inam F, Yan H, Jayaseelan DD, Peijs T, Reece MJ (2010) J Eur Ceram Soc 2:15310.1016/j.jeurceramsoc.2009.05.045 ↗
15. Mihranyan A, Nyholm L, Bennett AE, Stromme M (2008) J Phys Chem B 112:1224910.1021/jp805123w ↗
16. Imai M, Akiyama K, Tanaka T, Sano E (2010) Compos Sci Technol 70:156410.1016/j.compscitech.2010.05.023 ↗
17. Chen Y, Kang KS, Han KJ, Yoo KH, Kim J (2009) Synth Met 159:170110.1016/j.synthmet.2009.05.009 ↗
18. Fotherinigham DA (2007) J Appl Polym Sci 1:234
19. Chalfin JA (1982) Int J Adhes 3:19610.1016/0143-7496(82)90090-2 ↗
20. Garimella SV, Drozd V, Durygin A (2009) J Inorg Organomet Polym 19:41510.1007/s10904-009-9267-7 ↗
21. Shepherd RA, Doyle TJ, Graham WR (1988) J Chem Phys 5:273810.1063/1.455025 ↗
22. Pahari AK, Chauhan BS (2007) Engineering chemistry, 2nd edn. Infinity Science Press, Hingham, MA
23. Kumar S, Negi YS, Upadhyaya JS (2010) Adv Mater Lett 1:24610.5185/amlett.2010.9164 ↗
24. Jana RN, Cho JW (2008) J Appl Polym Sci 110:155010.1002/app.28710 ↗
25. Valentina P, Ilango K, Deepthi M, Harusha P, Pavani G, Sindhura KL, Keerthanan CG (2009) J Pharm Sci Res 2:74
26. Massicot F, Saleur D, Royon RP, Sudha AV, Portella C (2001) Synthesis 16:2441
27. Dixit BC, Patel HM, Desal DJ, Dixit RB (2009) J Chem 6:31510.1155/2009/393498 ↗
28. Prabhu SR, Rajasekhar M, Subramania A (2009) Int J Electrochem Sci 4:128910.1016/S1452-3981(23)15222-9 ↗
29. Kumar S, Srivastava DN, Singhal S, Saini V, Seth AK, Yadav YC (2011) J Chem Pharm Res 3:563
30. Tsai L, Chen Y (2007) J Polym Sci Part A Polym Chem 1. doi:https://doi.org/10.1002/pola.2235910.1002/pola.22359 ↗
31. Dixon JE, Stolper EM, Holloway JR (1995) J Petrol 36:1607
32. Liao LF, Lien CF, Shieh DL, Chen MT, Lin JL (2002) J Phys Chem B 43:1124010.1021/jp0211988 ↗
33. Wei J, Hing P, Mo ZQ (1999) Surf Interface Anal 28:20810.1002/(SICI)1096-9918(199908)28:1<208::AID-SIA578>3.0.CO;2-8 ↗
34. Yang R, Li GP, Wang KH (2001) J Appl Polym Sci 81:35910.1002/app.1446 ↗
35. Schroder DK (1998) Semiconductor material and device characterization, 2nd edn. Wiley, New York