Coal polymer composites prepared by fused deposition modeling (FDM) 3D printing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Guo M, Guo J, Jia D et al (2015) Coal derived porous carbon fibers with tunable internal channels for flexible electrodes and organic matter absorption. J Mater Chem A 3:2117810.1039/C5TA05743D ↗
2. Zhao H, Wang L, Jia D, Xia W, Li J, Guo Z (2014) Coal based activated carbon nanofibers prepared by electrospinning. J Mater Chem A 2:933810.1039/C4TA00069B ↗
3. Lee H-C, Byamba-Ochir N, Shim W-G, Balathanigaimani M, Moon H (2015) High-performance super capacitors based on activated anthracite with controlled porosity. J Power Sources 275:66810.1016/j.jpowsour.2014.11.072 ↗
4. Xing B-L, Guo H, Chen L-J et al (2015) Lignite-derived high surface area mesoporous activated carbons for electrochemical capacitors. Fuel Process Technol 138:73410.1016/j.fuproc.2015.07.017 ↗
5. Gao S, Liu L, Tang Y, Jia D, Zhao Z, Wang Y (2016) Coal based magnetic activated carbon as a high performance adsorbent for methylene blue. J Porous Mater 23:87710.1007/s10934-016-0144-9 ↗
6. Kovalchuk A, Huang K, Xiang C, Martí AA, Tour JM (2015) Luminescent polymer composite films containing coal-derived graphene quantum dots. ACS Appl Mater Interfaces 7:2606310.1021/acsami.5b06057 ↗
7. Zhu J, Zhang S, Wang L et al (2018) Engineering cross-linking by coal-based graphene quantum dots toward tough, flexible, and hydrophobic electrospun carbon nanofiber fabrics. Carbon 129:5410.1016/j.carbon.2017.11.071 ↗
8. Xing B, Zeng H, Huang G et al (2019) Porous graphene prepared from anthracite as high performance anode materials for lithium-ion battery applications. J Alloys Compd 779:20210.1016/j.jallcom.2018.11.288 ↗
9. Kang M, Zhao H, Ye J et al (2019) Adsorption dominant sodium storage in three-dimensional coal-based graphite microcrystal/graphene composites. J Mater Chem A 7:756510.1039/C8TA12062E ↗
10. Li J, Cao Y, Wang L, Jia D (2017) Cost-effective synthesis of bamboo-structure carbon nanotubes from coal for reversible lithium storage. RSC Adv 7:3477010.1039/C7RA04047D ↗
11. Ding X-K, Zhang L-L, Yang X-L et al (2017) Anthracite-derived dual-phase carbon-coated Li3V2 (PO4)3 as high-performance cathode material for lithium ion batteries. ACS Appl Mater Interfaces 9:4278810.1021/acsami.7b14117 ↗
12. Lu H, Sun S, Xiao L et al (2019) High-capacity hard carbon pyrolyzed from subbituminous coal as anode for sodium-ion batteries. ACS Appl Energy Mater 2:72910.1021/acsaem.8b01784 ↗
13. Gao S, Tang Y, Gao Y et al (2019) Highly crystalized Co2Mo3O8 hexagonal nanoplates interconnected by coal-derived carbon via the molten-salt-assisted method for competitive Li-ion battery anodes. ACS Appl Mater Interfaces 11:700610.1021/acsami.8b20366 ↗
14. Gao S, Tang Y, Wang L, Liu L, Jia D, Zhao Z (2017) NiFe nanoalloys in-situ immobilized on coal based activated carbons through one-step pyrolysis as magnetically recoverable catalysts for reduction of 4-nitrophenol. J Alloys Compd 702:53110.1016/j.jallcom.2016.12.375 ↗
15. Mohamed FM, Li Z, Zayed AM (2020) Carbon nanotube impregnated anthracite (An/CNT) as a superior sorbent for azo dye removal. RSC Adv 10:2558610.1039/D0RA03869E ↗
16. Yang XQ, Zhu KW, Yue XM, Zhang SQ, He S, Komarneni S (2018) Porous solids by the pyrolysis of residue obtained after NaOH extraction of lignite. J Porous Mater 25:897. https://doi.org/10.1007/s10934-017-0501-310.1007/s10934-017-0501-3 ↗
17. Mohamed EA, Selim AQ, Ahmed SA et al (2020) H2O2-activated anthracite impregnated with chitosan as a novel composite for Cr(VI) and methyl orange adsorption in single-compound and binary systems: modeling and mechanism interpretation. Chem Eng J 380:122445. https://doi.org/10.1016/j.cej.2019.12244510.1016/j.cej.2019.122445 ↗
18. Zhu X, Wang Q, Kang S, Li J, Jia X (2020) Coal-based ultrathin-wall graphitic porous carbon for high-performance form-stable phase change materials with enhanced thermal conductivity. Chem Eng J 395:12511210.1016/j.cej.2020.125112 ↗
19. Al-Majali YA, Chirume CT, Marcum EP, Daramola DA, Kappagantula KS, Trembly JP (2019) Coal-filler-based thermoplastic composites as construction materials: a new sustainable end-use application. ACS Sustain Chem Eng 7:1687010.1021/acssuschemeng.9b04453 ↗
20. Polok-Rubiniec M, Włodarczyk-Fligier A, Chmielnicki B (2021) The properties of a polypropylene matrix composite with anthracite filler. Arch Metall Mater 66:305
21. Tan JL, Cheng HZ, Wei LB, Gui XH (2019) Thermal and mechanical enhancement of styrene-butadiene rubber by filling with modified anthracite coal. J Appl Polym Sci 136:48203. https://doi.org/10.1002/app.4820310.1002/app.48203 ↗
22. Tan J, Cheng H, Wei L, Wei C, Xing Y, Gui X (2019) Using low-rank coal slime as an eco-friendly replacement for carbon black filler in styrene butadiene rubber. J Clean Prod 234:94910.1016/j.jclepro.2019.06.221 ↗
23. Phillips LN, Kappagantula KS, Trembly JP (2019) Mechanical performance of thermoplastic composites using bituminous coal as filler: study of a potentially sustainable end-use application for appalachian coal. Polym Compos 40:59110.1002/pc.24696 ↗
24. Vasireddy S, Morreale B, Cugini A, Song C, Spivey JJ (2011) Clean liquid fuels from direct coal liquefaction: chemistry, catalysis, technological status and challenges. Energy Environ Sci 4:31110.1039/C0EE00097C ↗
25. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R (2017) Polymers for 3D printing and customized additive manufacturing. Chem Rev 117:10212. https://doi.org/10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
26. Ji A, Zhang S, Bhagia S, Yoo CG, Ragauskas AJ (2020) 3D printing of biomass-derived composites: application and characterization approaches. RSC Adv 10:2169810.1039/D0RA03620J ↗
27. Wang X, Jiang M, Zhou Z, Gou J, Hui D (2017) 3D printing of polymer matrix composites: a review and prospective. Compos B Eng 110:44210.1016/j.compositesb.2016.11.034 ↗
28. Waheed S, Cabot JM, Smejkal P et al (2019) Three-dimensional printing of abrasive, hard, and thermally conductive synthetic microdiamond–polymer composite using low-cost fused deposition modeling printer. ACS Appl Mater Interfaces 11:435310.1021/acsami.8b18232 ↗
29. Chen G, Chen N, Wang Q (2018) Preparation of poly (vinyl alcohol)/ionic liquid composites with improved processability and electrical conductivity for fused deposition modeling. Mater Des 157:27310.1016/j.matdes.2018.07.054 ↗
30. Gnanasekaran K, Heijmans T, Van Bennekom S et al (2017) 3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling. Appl Mater Today 9:2110.1016/j.apmt.2017.04.003 ↗
31. Lin C, Lv JX, Li YS et al (2019) 4D-printed biodegradable and remotely controllable shape memory occlusion devices. Adv Funct Mater 29:1906569. https://doi.org/10.1002/adfm.20190656910.1002/adfm.201906569 ↗
32. Wang JC, Wang ZG, Song ZY, Ren LQ, Liu QP, Ren L (2019) Biomimetic shape-color double-responsive 4D printing. Adv Mater Technol 4:1900293. https://doi.org/10.1002/admt.20190029310.1002/admt.201900293 ↗
33. Chen DB, Liu QP, Han ZW et al (2020) 4D printing strain self-sensing and temperature self-sensing integrated sensor-actuator with bioinspired gradient gaps. Adv Sci 7:2000584. https://doi.org/10.1002/advs.20200058410.1002/advs.202000584 ↗
34. Zou W, Zhao J, Sun C (2018) Adsorption of anionic polyacrylamide onto coal and kaolinite calculated from the extended DLVO theory using the van Oss-Chaudhury-Good theory. Polymers 10:11310.3390/polym10020113 ↗
35. Touris A, Turcios A, Mintz E et al (2020) Effect of molecular weight and hydration on the tensile properties of polyamide 12. Results in Materials 8:100149. https://doi.org/10.1016/j.rinma.2020.10014910.1016/j.rinma.2020.100149 ↗
36. Bhagia S, Gallego NC, Hiremath N et al (2021) Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum. J Appl Polym Sci 138:5079710.1002/app.50797 ↗
37. Liu J, Jiang Y, Yao W, Jiang X, Jiang X (2019) Molecular characterization of Henan anthracite coal. Energy Fuels 33:621510.1021/acs.energyfuels.9b01061 ↗
38. Zhao L, Guanhua N, Hui W et al (2020) Molecular structure characterization of lignite treated with ionic liquid via FTIR and XRD spectroscopy. Fuel 272:11770510.1016/j.fuel.2020.117705 ↗
39. Guo H, Zhang Y, Zhang J et al (2019) Characterization of anthracite-degrading methanogenic microflora enriched from Qinshui Basin in China. Energy Fuels 33:638010.1021/acs.energyfuels.9b00494 ↗
40. Zhang Y, Tan J, Kang X, Yu H, Frost RL (2014) Structure evolution characterization of Anyang anthracites via H2O2 oxidization and HF acidification. Spectrochim Acta A Mol Biomol Spectrosc 130:57410.1016/j.saa.2014.04.046 ↗
41. Qi X, Chen L, Zhang L, Bai C, Xin H, Rao Z (2019) In situ FTIR study on real-time changes of active groups during lignite reaction under low oxygen concentration conditions. J Energy Inst 92:155710.1016/j.joei.2018.07.018 ↗
42. Qi X, Wang D, Xin H, Qi G (2013) In situ FTIR study of real-time changes of active groups during oxygen-free reaction of coal. Energy Fuels 27:313010.1021/ef400534f ↗
43. Feng L, Zhao G, Zhao Y, Zhao M, Tang J (2017) Construction of the molecular structure model of the Shengli lignite using TG-GC/MS and FTIR spectrometry data. Fuel 203:92410.1016/j.fuel.2017.04.112 ↗
44. Liu S, Sang S, Ma J, Wang T, Du Y, Fang H (2019) Effects of supercritical CO2 on micropores in bituminous and anthracite coal. Fuel 242:9610.1016/j.fuel.2019.01.008 ↗
45. Niu Q, Cao L, Sang S et al (2021) Experimental study on the softening effect and mechanism of anthracite with CO2 injection. Int J Rock Mech Min Sci 138:10461410.1016/j.ijrmms.2021.104614 ↗
46. Huang S, Liu Z, Yin C, Gao Y, Wang Y, Yang M (2012) Gelation of attractive particles in polymer melt. Polymer 53:429310.1016/j.polymer.2012.07.054 ↗
47. Li M, Wan Y, Gao Z et al (2013) Preparation and properties of polyamide 6 thermal conductive composites reinforced with fibers. Mater Des 51:25710.1016/j.matdes.2013.03.076 ↗
48. Zheng Y, Wang R, Dong X, Wu L, Zhang X (2018) High strength conductive polyamide 6 nanocomposites reinforced by prebuilt three-dimensional carbon nanotube networks. ACS Appl Mater Interfaces 10:28103. https://doi.org/10.1021/acsami.8b0894410.1021/acsami.8b08944 ↗