Cross-linking and silanization of clay-based multilayer films for improved corrosion protection of steel
Source abstract
Abstract
The potential for polymer–clay thin film composite coatings to replace environmentally-damaging phosphate conversion coatings on steel is demonstrated. Polyethylenimine and vermiculite clay are used in the layer-by-layer deposition of a 300 nm thick nanobrick wall thin film that hinders the diffusion of corrosive ions. The corrosion prevention performance of the coating is improved through cross-linking with glutaraldehyde and silanization of steel with aminopropyltriethoxysilane prior to film deposition. Finally, the nanobrick wall film is tested with an epoxy topcoat, to demonstrate the viability of the recipe as a primer. Epoxy with the cross-linked and silanized nanobrick wall primer coating outperforms a neat epoxy coating. This unique coating shows tremendous potential for use as an environmentally-benign primer for steel.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Polymer Nanocomposites and Properties · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Renner FU, Stierle A, Dosch H et al (2006) Initial corrosion observed on the atomic scale. Nature 439:707–710. https://doi.org/10.1038/nature0446510.1038/nature04465 ↗
2. Anticorrosive coatings: a review | SpringerLink. https://link.springer.com/article/https://doi.org/10.1007/s11998-008-9144-2. Accessed 11 Oct 201910.1007/s11998-008-9144-2 ↗
3. Hou Y, Lei D, Li S et al (2016) Experimental investigation on corrosion effect on mechanical properties of buried metal pipes. Int J Corros 2016:5808372. https://doi.org/10.1155/2016/580837210.1155/2016/5808372 ↗
4. Revie RW, Uhlig HH (2008) Corrosion and corrosion control: an introduction to corrosion science and engineering, 4th edn. Wiley-Interscience, Hoboken, N.J.10.1002/9780470277270 ↗
5. Geary W, Hobbs J (2013) Catastrophic failure of a carbon steel storage tank due to internal corrosion. Case Stud Eng Fail Anal 1:257–264. https://doi.org/10.1016/j.csefa.2013.09.00210.1016/j.csefa.2013.09.002 ↗
6. Stierle A (2008) Tracking corrosion cracking. Science 321:349–350. https://doi.org/10.1126/science.116093910.1126/science.1160939 ↗
7. Zarras P, Stenger-Smith JD (2014) 1–Corrosion processes and strategies for prevention: an introduction. In: Makhlouf ASH (ed) Handbook of Smart Coatings for Materials Protection. Woodhead Publishing, pp 3–2810.1533/9780857096883.1.3 ↗
8. Andreeva DV, Skorb EV (2014) Multi-layer smart coatings for corrosion protection of aluminium alloys and steel. In: Handbook of Smart Coatings for Materials Protection. Elsevier, pp 307–32710.1533/9780857096883.2.307 ↗
9. al-Swaidani AA (2017) Modified zinc phosphate coatings: a promising approach to enhance the anti-corrosion properties of reinforcing steel. MOJ Civ Eng 3, https://doi.org/10.1540/mojce.2017.03.0008310.1540/mojce.2017.03.00083 ↗
10. Narayanan S (2005) Surface pretreatment by phosphate conversion coatings–a review. Rev Adv Mater Sci 9:130–177
11. Ucaroglu S, Talinli İ (2012) Recovery and safer disposal of phosphate coating sludge by solidification/stabilization. J Environ Manage 105:131–137. https://doi.org/10.1016/j.jenvman.2012.03.02910.1016/j.jenvman.2012.03.029 ↗
12. Qian Y, Li Y, Jungwirth S et al (2015) The application of anti-corrosion coating for preserving the value of equipment asset in chloride-laden environments: a review. Int J Electrochem Sci 10:26
13. Shchukin DG, Zheludkevich M, Yasakau K et al (2006) Layer-by-layer assembled nanocontainers for self-healing corrosion protection. Adv Mater 18:1672–1678. https://doi.org/10.1002/adma.20050205310.1002/adma.200502053 ↗
14. Sinha Ray S, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641. https://doi.org/10.1016/j.progpolymsci.2003.08.00210.1016/j.progpolymsci.2003.08.002 ↗
15. Suarez-Martinez PC, Robinson J, An H et al (2018) Polymer-clay nanocomposite coatings as efficient, environment-friendly surface pretreatments for aluminum alloy 2024–T3. Electrochim Acta 260:73–81. https://doi.org/10.1016/j.electacta.2017.11.04610.1016/j.electacta.2017.11.046 ↗
16. Yeh J-M, Liou S-J, Lai C-Y et al (2001) Enhancement of corrosion protection effect in polyaniline via the formation of polyaniline−clay nanocomposite materials. Chem Mater 13:1131–1136. https://doi.org/10.1021/cm000938r10.1021/cm000938r ↗
17. Priolo MA, Holder KM, Greenlee SM, Grunlan JC (2012) Transparency, gas barrier, and moisture resistance of large-aspect-ratio vermiculite nanobrick wall thin films. ACS Appl Mater Interfaces 4:5529–5533. https://doi.org/10.1021/am301428910.1021/am3014289 ↗
18. Qin S, Cubides Y, Lazar S et al (2018) Ultrathin transparent nanobrick wall anticorrosion coatings. ACS Appl Nano Mater 1:5516–5523. https://doi.org/10.1021/acsanm.8b0103210.1021/acsanm.8b01032 ↗
19. Percival SJ, Melia MA, Alexander CL et al (2020) Nanoscale thin film corrosion barriers enabled by multilayer polymer clay nanocomposites. Surf Coat Technol 383:125228. https://doi.org/10.1016/j.surfcoat.2019.12522810.1016/j.surfcoat.2019.125228 ↗
20. Xiang F, Tzeng P, Sawyer JS et al (2014) Improving the gas barrier property of clay-polymer multilayer thin films using shorter deposition times. ACS Appl Mater Interfaces 6:6040–6048. https://doi.org/10.1021/am403445z10.1021/am403445z ↗
21. Maitra J, Shukla (2014) Hydrogels, Cross linking, Gel, Polymer. Am J Polym Sci 7
22. Lindén JB, Larsson M, Kaur S et al (2016) Glutaraldehyde-crosslinking for improved copper absorption selectivity and chemical stability of polyethyleneimine coatings. J Appl Polym Sci. https://doi.org/10.1002/app.4395410.1002/app.43954 ↗
23. Liu Y, Cao H-J, Yu Y, Chen S (2015) Corrosion protection of silane coatings modified by carbon nanotubes on stainless steel. Int J Electrochem Sci 10:3497–350910.1016/S1452-3981(23)06556-2 ↗
24. Howarter JA, Youngblood JP (2006) Optimization of silica silanization by 3-aminopropyltriethoxysilane. Langmuir 22:11142–11147. https://doi.org/10.1021/la061240g10.1021/la061240g ↗
25. Jang WS, Grunlan JC (2005) Robotic dipping system for layer-by-layer assembly of multi-functional thin films. Rev Sci Instrum 76:10390410.1063/1.2084447 ↗
26. Yang Y-H, Bolling L, HaileC Grunlan MJ (2012) Improving oxygen barrier and reducing moisture sensitivity of weak polyelectrolyte multilayer thin films with crosslinking. RSC Adv 2:12355–12363. https://doi.org/10.1039/C2RA21845C10.1039/C2RA21845C ↗
27. Hagen DA, Saucier L, Grunlan JC (2014) Controlling effective aspect ratio and packing of clay with ph for improved gas barrier in nanobrick wall thin films. ACS Appl Mater Interfaces 6:22914–22919. https://doi.org/10.1021/am507603z10.1021/am507603z ↗
28. Karabanova L, Sergeeva L, Boiteux G (2001) Filler effect on formation and properties of reinforced interpenetrating polymer networks. Compos Interfaces 8:207–219. https://doi.org/10.1163/1568554015259467710.1163/15685540152594677 ↗
29. Ruijgrok JM, De Wijn JR, Boon ME (1994) Optimizing glutaraldehyde crosslinking of collagen: effects of time, temperature and concentration as measured by shrinkage temperature. J Mater Sci Mater Med 5:80–87. https://doi.org/10.1007/BF0012169510.1007/BF00121695 ↗
30. Yuan X, Wolf N, Mayer D et al (2019) Vapor-phase deposition and electronic characterization of 3-aminopropyltriethoxysilane self-assembled monolayers on silicon dioxide. Langmuir 35:8183–8190. https://doi.org/10.1021/acs.langmuir.8b0383210.1021/acs.langmuir.8b03832 ↗
31. Zhang F, Sautter K, Larsen AM et al (2010) Chemical vapor deposition of three aminosilanes on silicon dioxide: surface characterization, stability, effects of silane concentration, and cyanine dye adsorption. Langmuir 26:14648–14654. https://doi.org/10.1021/la102447y10.1021/la102447y ↗
32. de Miranda MIG, Tomedi C, Bica CID, Samios D (1997) A d.s.c. kinetic study on the effect of filler concentration on crosslinking of diglycidylether of bisphenol-A with 4,4′-diaminodiphenylmethane. Polymer 38:1017–1020. https://doi.org/10.1016/S0032-3861(96)00601-510.1016/S0032-3861(96)00601-5 ↗
33. Vermeirssen ELM, Dietschweiler C, Werner I, Burkhardt M (2017) Corrosion protection products as a source of bisphenol A and toxicity to the aquatic environment. Water Res 123:586–593. https://doi.org/10.1016/j.watres.2017.07.00610.1016/j.watres.2017.07.006 ↗