Preparation and electrochemical properties of ionic-liquid-modified Na3SbS4 membrane composite electrolytes
Source abstract
Abstract
Sulfide-based Na-ion solid electrolytes with high ionic conductivity are one of the most promising solid electrolytes for solid-state Na batteries. However, its poor chemical/electrochemical stability against Na metal leads to deterioration of interface. In addition, it is important to explore how to prepare sulfide-based composite membranes via solution method. Herein, Na3SbS4 is deposited on glassfiber framework via aqueous solution and further incorporated with trace of ionic liquid (IL). The Na3SbS4 composite pellets are well shaped avoiding the pressing process. The IL not only improves the Na3SbS4-Na interfacial stability, but also fills the pores between the framework and Na3SbS4 and thereby suppressing the dendrite formation. The Na plating/stripping tests on symmetric cells show polarization voltages lower than 0.1 V and stable cycling for more than 400 cycles under a current density of 0.1 mA cm−2 at room temperature. The cycling performance of the FeS2 half-cells with the optimized electrolyte tested at 60 °C is superior to that with organic liquid electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Chayambuka K, Mulder G, Danilov DL (2020) From Li-ion batteries toward Na-ion chemistries: challenges and opportunities. Adv Energy Mater 10:200131010.1002/aenm.202001310 ↗
2. Delmas C, Carlier D, Guignard M (2020) The layered oxides in lithium and sodium-ion batteries: a solid-state chemistry approach. Adv Energy Mater. https://doi.org/10.1002/aenm.20200120110.1002/aenm.202001201 ↗
3. Jia M, Zhang L (2020) Recent development on sulfide solid electrolytes for solid-state sodium batteries. Energy Storage Sci Technol 9:1266–1283
4. Zhao Q, Stalin S, Archer LA (2020) Designing solid-state electrolytes for safe, energy-dense batteries. Nat Rev Mater 5:229–25210.1038/s41578-019-0165-5 ↗
5. Vaalma C, Buchholz D, Weil M (2018) A cost and resource analysis of sodium-ion batteries. Nat Rev Mater 3:1–1110.1038/natrevmats.2018.13 ↗
6. Zhou C, bag S, Thangadurai V, (2018) Engineering materials for progressive all-solid-state Na batteries. ACS Energy Lett 3:2181–219810.1021/acsenergylett.8b00948 ↗
7. Zhang L, Zhang D, Yang K (2016) Vacancy-contained tetragonal Na3SbS4 superionic conductor. Adv Sci 3:160008910.1002/advs.201600089 ↗
8. Chen XZ, He WJ, Ding LX, Wang SQ, Wang HH (2019) Enhancing interfacial contact in all solid state batteries with a cathode-supported solid electrolyte membrane framework. Energy Environ Sci 12:938–94410.1039/C8EE02617C ↗
9. Han F, Westover AS, Yue J (2019) High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes. Nat Energy 4:187–19610.1038/s41560-018-0312-z ↗
10. Hayashi A, Masuzawa N, Yubuchi S (2019) A sodium-ion sulfide solid electrolyte with unprecedented conductivity at room temperature. Nat Commun 10:526610.1038/s41467-019-13178-2 ↗
11. Zhu YZ, Mo YF (2020) Materials design principles for air-stable lithium/sodium solid electrolytes. Angew Chem Int Ed 59:17472–1747610.1002/anie.202007621 ↗
12. Zhao Y, Adair KR, Sun X (2018) Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries. Energy Environ Sci 11:2673–269510.1039/C8EE01373J ↗
13. Xiao Y, Wang Y, Ceder G (2019) Understanding interface stability in solid-state batteries. Nat Rev Mater 5:105–12610.1038/s41578-019-0157-5 ↗
14. Hu P, Zhang Y, Chi X (2019) Stabilizing the interface between sodium metal anode and sulfide-based solid-state electrolyte with an electron-blocking interlayer. ACS Appl Mater Interfaces 11:9672–967810.1021/acsami.8b19984 ↗
15. Tian Y, Sun Y, Hannah DC (2019) Reactivity-guided interface design in Na metal solid-state batteries. Joule 3:1037–105010.1016/j.joule.2018.12.019 ↗
16. Lu Y, Cai YC, Zhang Q (2019) A compatible anode/succinonitrile-based electrolyte interface in all-solid-state Na-CO2 batteries. Chem Sci 10:4306–431210.1039/C8SC05178J ↗
17. Zhang Z, Zhang L, Yan X (2019) All-in-one improvement toward Li6PS5Br-based solid electrolytes triggered by compositional tune. J Power Sources 410:162–17010.1016/j.jpowsour.2018.11.016 ↗
18. Tu Z, Choudhury S, Zachman MJ (2018) Fast ion transport at solid–solid interfaces in hybrid battery anodes. Nat Energy 3:310–31610.1038/s41560-018-0096-1 ↗
19. Kato Y, Hori S, Saito T (2016) High-power all-solid-state batteries using sulfide superionic conductors. Nat Energy 1:1603010.1038/nenergy.2016.30 ↗
20. Lin Z, Liu Z, Fu W (2013) Lithium polysulfidophosphates: a family of lithium-conducting sulfur-rich compounds for lithium-sulfur batteries. Angew Chem Int Ed 52:7460–746310.1002/anie.201300680 ↗
21. Lim H-D, Lim H-K, Xing X (2018) Solid electrolyte layers by solution deposition. Adv Mater Interfaces 5:170132810.1002/admi.201701328 ↗
22. Whiteley JM, Zhang W, Lee S-H (2015) Ultra-thin solid-state Li-ion electrolyte membrane facilitated by a self-healing polymer matrix. Adv Mater 27:6922–692710.1002/adma.201502636 ↗
23. Wang Z, Zhang P, Jia Y, Wang Z, Song J, Yan X, Zhang L (2021) Dimethyl carbonate adsorption enabling enhanced overall electrochemical properties for solid composite electrolyte. J Alloys Compd 853:15734010.1016/j.jallcom.2020.157340 ↗
24. Nam YJ, Cho SJ, Oh DY (2015) Bendable and thin sulfide solid electrolyte film: a new electrolyte opportunity for free-standing and stackable high-energy all-solid-state lithium-ion batteries. Nano Lett 15:3317–332310.1021/acs.nanolett.5b00538 ↗
25. Xu R, Yue J, Liu S (2019) Cathode-supported all-solid-state lithium–sulfur batteries with high cell-level energy density. ACS Energy Lett 4:1073–107910.1021/acsenergylett.9b00430 ↗
26. Yang H, Hwang J, Wang Y (2019) N-ethyl-N-propylpyrrolidinium bis(fluorosulfonyl)amide ionic liquid electrolytes for sodium secondary batteries: effects of Na ion concentration. J Phys Chem C 123:22018–2202610.1021/acs.jpcc.9b05941 ↗
27. Forsyth M, Porcarelli L, Wang X (2019) Innovative electrolytes based on ionic liquids and polymers for next-generation solid-state batteries. Acc Chem Res 52:686–69410.1021/acs.accounts.8b00566 ↗
28. An T, Jia H, Peng L, Xie J (2020) Material and interfacial modification toward a stable room-temperature solid-state Na–S battery. ACS Appl Mater Interfaces 12:20563–2056910.1021/acsami.0c03899 ↗
29. Zhang Z, Zhang L, Liu Y (2018) Interface-engineered Li7La3Zr2O12-based garnet solid electrolytes with suppressed Li-dendrite formation and enhanced electrochemical performance. Chemsuschem 11:3774–378210.1002/cssc.201801756 ↗
30. Zheng B, Zhu J, Wang H, Feng M, Umeshbabu E, Li Y, Wu Q, Yang Y (2018) Stabilizing Li10SnP2S12/Li interface via an in situ formed solid electrolyte interphase layer. ACS Appl Mater Interfaces 10:52473–52482
31. Matsumoto K, Hwang J, Kaushik S (2019) Advances in sodium secondary batteries utilizing ionic liquid electrolytes. Energy Environ Sci 12:3247–328710.1039/C9EE02041A ↗
32. Yang Q, Zhang Z, Sun XG (2018) Ionic liquids and derived materials for lithium and sodium batteries. Chem Soc Rev 47:2020–206410.1039/C7CS00464H ↗
33. Bai S, Da P, Li C (2019) Planar perovskite solar cells with long-term stability using ionic liquid additives. Nat 571:245–25010.1038/s41586-019-1357-2 ↗
34. Sun H, Zhu GZ, Zhu YM (2020) High-safety and high-energy-density lithium metal batteries in a novel ionic-liquid electrolyte. Adv Mater 32:200174110.1002/adma.202001741 ↗
35. Wang H, Chen Y, Hood Z, Sahu G, Pandian A, Keum J, An K, Liang C (2016) An air-stable Na3SbS4 superionic conductor prepared by a rapid and economic synthetic procedure. Angew Chem Int Ed 55:8551–855510.1002/anie.201601546 ↗
36. Banerjee A, Park K, Heo J, Nam Y, Moon C, Oh S, Hong S, Jung Y (2016) Na3SbS4: a solution processable sodium superionic conductor for all-solid-state sodium-ion batteries. Angew Chem Int Ed 55:9634–963810.1002/anie.201604158 ↗
37. Fuchs T, Culver SP, Till P, Zeier WG (2020) Defect-mediated conductivity enhancements in Na3−xPn1−xWxS4 (Pn = P, Sb) using aliovalent substitutions. ACS Energy Lett 5:146–15110.1021/acsenergylett.9b02537 ↗
38. Hayashi A, Masuzawa N, Yubuchi S, Tsuji F, Hotehama C, Sakuda A, Tatsumisago M (2019) A sodium-ion sulfide solid electrolyte with unprecedented conductivity at room temperature. Nat Commun 10:526610.1038/s41467-019-13178-2 ↗
39. Kim TW, Park KH, Choi YE, Lee JY, Jung YS (2018) Aqueous-solution synthesis of Na3SbS4 solid electrolytes for all-solid-state Na-ion batteries. J Mater Chem A 6:840–84410.1039/C7TA09242C ↗
40. Cao H, Yu M, Zhang L, Zhang Z, Yan X, Li P, Yu C (2020) Stabilizing Na3SbS4/Na interface by rational design via Cl doping and aqueous processing. J Mater Sci Technol 70:168–17510.1016/j.jmst.2020.08.035 ↗
41. Liu Y, Zhang L, Liu D (2019) Turbostratic carbon-localised FeS2 nanocrystals as anodes for high-performance sodium-ion batteries. Nanoscale 11:1549710.1039/C9NR05594K ↗
42. Wan H, Cai L, Yao Y, Weng W, Feng Y, Mwizerwa JP (2020) Self-formed electronic/ionic conductive Fe3S4@S@0.9Na3SbS4·0.1NaI composite for high-performance room-temperature all-solid-state sodium-sulfur battery. Small 16:200157410.1002/smll.202001574 ↗
43. Gamo H, Phuc NHH, Matsuda R, Muto H, Matsuda A (2019) Multiphase Na3SbS4 with high ionic conductivity. Mater Today Energy 13:45–4910.1016/j.mtener.2019.04.012 ↗
44. Wan H, Mwizerwa JP, Han F, Weng W, Yang J, Wang C (2019) Grain-boundary-resistance-less Na3SbS4-Se solid electrolytes for all-solid-state sodium batteries. Nano Energy 66:10410910.1016/j.nanoen.2019.104109 ↗
45. Wan H, Weng W, Han F, Cai L, Wang C, Yao X (2020) Bio-inspired nanoscaled electronic/ionic conduction networks for room-temperature all-solid-state sodium-sulfur battery. Nano Today 33:10086010.1016/j.nantod.2020.100860 ↗
46. Zhang Q, Zhang C, Hood ZD, Chi M, Liang C, Jalarvo NH (2020) Abnormally low activation energy in cubic Na3SbS4 superionic conductors. Chem Mater 32:2264–227110.1021/acs.chemmater.9b03879 ↗
47. Zhang D, Cao X, Xu D, Wan N, Yu C, Hu W, Yan X (2018) Synthesis of cubic Na3SbS4 solid electrolyte with enhanced ion transport for all-solid-state sodium-ion batteries. Electrochim Acta 259:100–10910.1016/j.electacta.2017.10.173 ↗
48. Cheng E, Sharafi A, Sakamoto J (2017) Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte. Electrochim Acta 223:85–9110.1016/j.electacta.2016.12.018 ↗
49. Shang Y, Chen N, Li Y, Chen S, Lai J, Huang Y, Qu W, Wu F, Chen R (2020) An “ether-in-water” electrolyte boosts stable interfacial chemistry for aqueous lithium-ion batteries. Adv Mater 32:2002017
50. Wang C, Gong Y, Liu B (2017) Conformal, nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes. Nano lett 17:565–57110.1021/acs.nanolett.6b04695 ↗
51. Dewees R, Wang H (2019) Synthesis and properties of NASICON-type LATP and LAGP solid electrolytes. Chemsuschem 12:3713–372510.1002/cssc.201900725 ↗
52. Brutti S, Navarra MA, Maresca G (2019) Ionic liquid electrolytes for room temperature sodium battery systems. Electrochim Acta 306:317–32610.1016/j.electacta.2019.03.139 ↗
53. Hong Z, Viswanathan V (2019) Prospect of thermal shock induced healing of lithium dendrite. ACS Energy Lett 4:1012–101910.1021/acsenergylett.9b00433 ↗
54. Nguyen CC, Woo SW, Song SW (2012) Understanding the interfacial processes at silicon–copper electrodes in ionic liquid battery electrolyte. J Phys Chem C 116:14764–1477110.1021/jp3019815 ↗
55. Zhao J, Liao L, Shi F (2017) Surface fluorination of reactive battery anode materials for enhanced stability. J Am Chem Soc 139:11550–1155810.1021/jacs.7b05251 ↗
56. Lang J, Long Y, Qu J (2019) One-pot solution coating of high quality LiF layer to stabilize Li metal anode. Energy Storage Mater 16:85–9010.1016/j.ensm.2018.04.024 ↗
57. Gao Y, Zhao Y, Li Y (2017) Interfacial chemistry regulation via a skin-grafting strategy enables high-performance lithium-metal batteries. J Am Chem Soc 139:15288–1529110.1021/jacs.7b06437 ↗
58. Zhang X, Liu T, Zhang S (2017) Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes. J Am Chem Soc 139:13779–1378510.1021/jacs.7b06364 ↗
59. Zhang Y, Sun Y, Peng L (2019) Se as eutectic accelerator in sulfurized polyacrylonitrile for high performance all-solid-state lithium-sulfur battery. Energy Storage Mater 21:287–29610.1016/j.ensm.2018.12.010 ↗