Interfacial phenomena between molten iron and molten slag–Effect of nitrogen on the Marangoni convection
Source abstract
Abstract
Abstract In order to investigate the influence of the surface-active element on the interfacial phenomena between molten iron and molten Al2O3-CaO-SiO2 slag, a mildly surface-active element, nitrogen, was introduced, and the interfacial phenomena were directly observed using an X-ray sessile drop method. The multiphysics model was employed to calculate the velocity of the Marangoni convection caused by the surface/interfacial tension gradient along with the contour of the sessile drop. Movement of the sessile drop was observed in the experiment, and the driving force of the movement was discussed from the distribution of surface tension active element viewpoint. The calculated velocity of the Marangoni convection in the droplet was reasonably agreed with the literature data for the metal-gas system, and thus, the same model was applied for the metal-slag system. The velocity of the Marangoni convection for the metal-slag system becomes ten times lower compared to that of metal-gas system. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Fluid Dynamics and Thin Films · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Mukai K, Matsushita T (2019) Interfacial Physical Chemistry of High-temperature Melts. CRC Press, Florida
2. Ed. by Ueno I, Matsumoto S, Watanabe M (2019) Microgravity experiments on Marangoni convection- MEIS, Dynamic Surf, and toward JEREMI-. Int. J. Microgravity Sci. Appl. 36: 360201–1–360207–7.
3. Watanabe M, Tanaka T, Tsukada T, Ishikawa T, Tamaru H, Mizuno A (2015) Numerical Evaluation for Measurement Conditions of Interfacial Tension between Molten Slag and Molten Iron by Oscillating Drop Technique in ISS. Int J Microgravity Sci Appl 32:320103–1-320103–7
4. Nakamura T, Yokoyama K, Noguchi F, Mukai K (1991) Direct Observations of Marangoni Convection in Molten Salts. Molten Salt Chemistry and Technology, Materials Science Forum, Trans. Tech Publ Switzerland 73–75:153–158
5. Mukai K (1998) Marangoni flows and corrosion of refractory walls. Phil Trans R Soc Lond A 356:1015–102610.1098/rsta.1998.0206 ↗
6. Mukai K, Toguri JM, Kodama I, Yoshitomi J (1986) Effect of Applied Potential on the Interfacial Tension between Liquid Lead and PbO–SiO2 Slags. Can Metall Q 25:225–23110.1179/cmq.1986.25.3.225 ↗
7. Mukai K, Matsushita T, Seetharaman S (2005) Motion of fine particles in liquid caused by interfacial tension gradient in relation to metals separation technologies. Scand J Metall 34:137–14210.1111/j.1600-0692.2005.00729.x ↗
8. Kaptay G (2012) Interfacial forces in dispersion science and technology. J Dispers Sci Technol 33:130–14010.1080/01932691.2010.548232 ↗
9. Kaptay G (2005) Classification and general derivation of interfacial forces, acting on phases, situated in the bulk, or at the interface of other phases. J Mater Sci 40:2125–213110.1007/s10853-005-1902-2 ↗
10. Mukai K, Zeze M (2003) Motion of Fine Particles under Interfacial Tension Gradient in Relation to Continuous Casting Process. Steel Res 74:131–13810.1002/srin.200300172 ↗
11. Mukai K, ed. by Seetharaman S (2005) Fundamentals of Metallurgy. Woodhead Publishing Limited, Cambridge, p.246–263.
12. Mills KC, Hondros ED, Li Z (2005) Interfacial phenomena in high temperature processes. J Mater Sci 40:2403–240910.1007/s10853-005-1966-z ↗
13. Sándor T, Mekler C, Dobránszky J, Kaptay G (2012) An Improved Theoretical Model for A-TIG Welding Based on Surface Phase Transition and Reversed Marangoni Flow. Metal Mater Trans A 44:351–36110.1007/s11661-012-1367-2 ↗
14. Mills KC, Keene BJ, Brooks RF, Shirali A (1998) Marangoni effects in welding. Phil Trans R Soc Lond A 356:911–92510.1098/rsta.1998.0196 ↗
15. Yin H, Emi T (2003) Marangoni flow at the gas/melt interface of steel. Metal Mater Trans B 34:483–49310.1007/s11663-003-0015-z ↗
16. Eyer A, Leiste H, Nitsche R. (1984) Crystal Growth Of Silicon On Spacelab 1, Experiment ES-321. In ESA European Symposium on Material Science Under Microgravity, Results of Spacelab 1, Schloss Elmau, November 5–7, 1984, ESA SP-222, p. 173–182.
17. Byrne M, Belton GR (1983) Studies of the interfacial kinetics of the reaction of nitrogen with liquid iron by the15N-14N isotope exchange reaction. Metall Trans B 14:441–44910.1007/BF02654363 ↗
18. Lee J, Morita K (2003) Interfacial Kinetics of Nitrogen with Molten Iron Containing Sulfur. ISIJ Int 43:14–1910.2355/isijinternational.43.14 ↗
19. Zhu J, Mukai K (1998) The Influence of Oxygen on the Rate of Nitrogen Absorption into Molten Iron and Marangoni Convection. ISIJ Int 38:220–22810.2355/isijinternational.38.220 ↗
20. Zhu J, Mukai K (1999) The Rate of Nitrogen Desorption from Liquid Iron by Blowing Argon Gas under the Condition of Non-inductive Stirring. ISIJ Int 39:219–22810.2355/isijinternational.39.1 ↗
21. Mukai K, ed. by Seetharaman S (2005) Fundamentals of Metallurgy, Woodhead Publishing Limited, Cambridge, p.246.
22. Seetharaman S, Mukai K, Sichen D (2004) Viscosities of slags-an overview. 7th International Conference Molten Slags Fluxes and Salts, Cape Town, The South African Institute of Mining and Metallurgy 31–41.
23. Hahn P-S, Slattery JC (1985) Effect of surface viscosities on the stability of a draining plane parallel liquid film as a small bubble approaches a liquid-gas interface. AIChE J 31:950–95610.1002/aic.690310611 ↗
24. Edwards DA, Wasan DT (1990) Foam Dilatational Rheology, I. Dilatational viscosity. J Colloid Interf Sci 139:479–48710.1016/0021-9797(90)90120-D ↗
25. Agrawal SK, Wasan DT (1979) The effect of interfacial viscosities on the motion of drops and bubbles. Chem Eng J 18:215–22310.1016/0300-9467(79)80121-5 ↗
26. Edwards EA, Brenner H, Wasan DT (1989) On a relation between foam and surface dilatational viscosities. J Colloid Interf Sci 130:266–27010.1016/0021-9797(89)90098-2 ↗
27. Matsushita T, Watanabe T, Mukai K, Seetharaman S (2009) Interfacial phenomena between molten steel and slag. Proceedings of the VIII International Conference on Molten Slags, Fluxes and Salts, 18–21 January 2009, Santiago, Chile, 703–714.
28. Matsushita T, Watanabe T (2011) Dynamic in situ X-ray observation of a molten steel drop shape change in molten slag. Mineral Processing and Extractive Metallurgy (Trans. Inst. Min Metall. C). 120: 49–55.
29. Elfsberg J, Matsushita T (2011) Measurements and Calculation of Interfacial Tension between Commercial Steels and Mould Flux Slags. steel research int. 82: 404–414.10.1002/srin.201000221 ↗
30. Muhmood L, Viswanathan NN, Seetharaman S (2011) Some Investigations into the Dynamic Mass Transfer at the Slag-Metal Interface Using Sulfur: Concept of Interfacial Velocity. Metall Mater Trans B 42B:460–47010.1007/s11663-011-9482-9 ↗
31. Cao W, Muhmood L, Seetharaman S (2012) Sulfur transfer at slag/metal interface–impact of oxygen potential. Metall Mater Trans B 43B:363–36910.1007/s11663-011-9602-6 ↗
32. Keene BJ (1988) Review of data for the surface tension of iron and its binary alloys. Int Mater Rev 33:1–3710.1179/imr.1988.33.1.1 ↗
33. Zhu J, Mukai K (1998) The Surface Tension of Liquid Iron Containing Nitrogen and Oxygen. ISIJ Int 38:1039–104410.2355/isijinternational.38.1039 ↗
34. Ed. by Hino M, Ito K (2010) Thermodynamic data for steelmaking. Tohoku University Press, Sendai, p.254.
35. Iyengar GNK, Pehlke RD (1970) Dissolution of boron nitride in liquid iron. Metal Trans 1:2235–224210.1007/BF02643440 ↗
36. Ogino K. (1988) Handbook of physico-chemical properties at high temperatures, eds. Kawai Y, Shiraishi Y., ISIJ, Japan, 170.
37. Siafakas D, Matsushita T, Hakamada S, Onodera K, Kargl F, Jarfors AEW, Watanabe M (2018) Measurement of Viscosity of SiO2-CaO-Al2O3 Slag in Wide Temperature Range by Aerodynamic Levitation and Rotating Bob Methods and Sources of Systematic Error. Int J Microgravity Sci Appl 35:350204–1-350204–8
38. Mills KC (2002) Recommended values of thermophysical properties for selected commercial alloys. Woodhead Publishing Limited, Cambridge10.1533/9781845690144 ↗
39. Macrossan MN, Lilley CR (2003) Viscosity of argon at temperatures >2000 K from measured shock thickness. Phys Fluids 15:3452–345710.1063/1.1616556 ↗
40. Reid RC, Prausnitz JM, Poling BE (1987) The properties of gases and liquids, 4th edn. McGraw Hill, New York
41. Keene BJ (1993) Review of data for the surface tension of pure metals. Int Mater Rev 38:157–19210.1179/imr.1993.38.4.157 ↗
42. Ed. by Hino M, Ito K (2010) Thermodynamic data for steelmaking. Tohoku University Press, Sendai, p.247.
43. Hirashima N, Choo RTC, Toguri JM, Mukai K (1995) The effect of surface movements on nitrogen mass transfer in liquid iron. Metall Trans B 26B:971–98010.1007/BF02654098 ↗
44. Xin J, Gan L, Jiao L, Lai C (2017) Accurate Density Calculation for Molten Slags in SiO2–Al2O3–CaO–MgO Systems. ISIJ Int 57:1340–134910.2355/isijinternational.ISIJINT-2017-070 ↗
45. Ito K, Fruehan RJ (1988) Thermodynamics of nitrogen in CaO-SiO2-Al2O3 slags and its reaction with Fe-Csat. melts. Metall Trans B 19:419–42510.1007/BF02657739 ↗
46. Bashforth F, Adams JC (1883) An attempt to test the theories of capillary action by comparing the theoretical and measured forms of drops of fluid. Cambridge University Press, Cambridge
47. Girifalco LA, Good RJ (1957) A Theory for the Estimation of Surface and Interfacial Energies. I. Derivation and Application to Interfacial Tension. J Phys Chem 61:904–90910.1021/j150553a013 ↗
48. Cramb AW, Jimbo I (1989) Interfacial considerations in continuous casting, Iron and steelmaker, June: 43–55.
49. Cramb AW, Jimbo I (1989) Calculation of the interfacial properties of liquid steel–slag systems. Steel Res 60:157–16510.1002/srin.198900893 ↗
50. Allibert M, Gaye H, Geiseler J, Janke D, Keene BJ, Kirner D, Kowalski M, Lehmann J, Mills KC, Neuschutz D, Parra R (1995) Slag Atlas, 2nd ed., ed. by Verein Deutscher Eisenhuttenleute (VDEh), Verlag Stahleisen, Düsseldorf, 431.
51. Ogino K (1988) Handbook of Physico-chemical Properties at High Temperatures, ISIJ, ed. Kawai Y and Shiraishi Y, Tokyo, 170.
52. Watanabe M (2018) Measurement of Interfacial Tension and Thermophysical Properties of Molten Steel and Oxides, Twenties symposium on thermophysical properties, Boulder, CO, USA, June 24–29.