journal article·2020-11Open access

Oxygen separation from air by the combined temperature swing and pressure swing processes using oxygen storage materials Y1−x(Tb/Ce)xMnO3+δ

Alicja Klimkowicz, Takao Hashizume, Kacper Cichy, Sayaka Tamura, Konrad Świerczek, Akito Takasaki, Teruki Motohashi, Bogdan Dabrowski

Journal of Materials Science· Volume 55· Issue 33

Abstract

Abstract Hexagonal Y1−xRxMnO3+δ (R: other than Y rare earth elements) oxides have been recently introduced as promising oxygen storage materials that can be utilized in the temperature swing processes for the oxygen separation and air enrichment. In the present work, the average and local structures of Tb- and Ce-substituted Y0.7Tb0.15Ce0.15MnO3+δ and Y0.6Tb0.2Ce0.2MnO3+δ materials were studied, and their oxygen storage-related properties have been evaluated. The fully oxidized samples show the presence of a significant amount of the highly oxygen-loaded the so-called Hex3 phase, attaining an average oxygen content of δ ≈ 0.41 for both compositions. Extensive studies of the temperature swing process conducted in air and N2 over the temperature range of 180–360 °C revealed large and reversible oxygen content changes taking place with only a small temperature differences and the high dependence on the oxygen partial pressure. Significant for practical performance, the highest reported for this class of compounds, oxygen storage capacity of 1900 μmol O g−1 in air was obtained for the optimized materials and swing process. In the combined temperature–oxygen partial pressure swing process, the oxygen storage capacity of 1200 μmol O g−1 was achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. McWhirter JR (2019) The use of high-purity oxygen in the activated sludge, vol 1. CRC Press, Boca Raton10.1201/9780429290718 ↗
2. Asano R, Mathai SC, Macdonald PS, Newton PJ, Currow DC, Phillips J, Yeung W-F, Davidson PM (2020) Oxygen use in chronic heart failure to relieve breathlessness: a systematic revive. Heart Fail Rev 25(2):195–20510.1007/s10741-019-09814-0 ↗
3. Guo H, Yin S, Yu Q, Yang X, Huang H, Yang Y, Gao F (2018) Iron recovery and active residue production from basic oxygen furnace (BOF) slag for supplementary cementitious materials. Resour. Conserv. Recy. 129:209–21810.1016/j.resconrec.2017.10.027 ↗
4. Dalena F, Senatore A, Marino A, Gordano A, Basile M, Basile A (2018) Chapter 1 - methanol production and applications: an overview. Methanol science and engineering. Elsevier, Amsterdam, pp 3–28
5. Tan X, Li K (2007) Oxygen production using dense ceramic hollow fiber membrane modules with different operating modes. AIChE J 53:838–84510.1002/aic.11116 ↗
6. Cheng Y, Zhao H, Teng D, Li F, Lu X, Ding W (2008) Investigation of Ba fully occupied A-site BaCo0.7Fe0.3−xNbxO3−δ perovskite stabilized by low concentration of Nb for oxygen permeation membrane. J Membr Sci 322:484–49010.1016/j.memsci.2008.05.065 ↗
7. Lu Y, Zhao H, Chang X, Du X, Li K, Ma Y, Yi S, Du Z, Zheng K, Świerczek K (2016) Novel cobalt-free BaFe1−xGdxO3+d perovskite membranes for oxygen separation. J Mater Chem A 4:10454–1046610.1039/C6TA01749E ↗
8. Prosser NM, Shah MM (2011) Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture. Woodhead Publishing Series in Energy, pp 195–22710.1533/9780857090980.2.195 ↗
9. Fu Y, Liu Y, Yang X, Li Z, Jiang L, Zhang C, Wang H, Yang RT (2019) Thermodynamic analysis of molecular simulations of N2 and O2 adsorption on zeolites under plateau special conditions. Appl Surf Sci 480:868–87510.1016/j.apsusc.2019.03.011 ↗
10. Santos JC, Cruz P, Regala T, Magalhães FD, Mendes A (2007) High-purity oxygen production by pressure swing adsorption. Ind Eng Chem Res 46:591–59910.1021/ie060400g ↗
11. Saha D, Kienbaum MJ (2019) Role of oxygen, nitrogen and sulfur functionalities on the surface of nanoporous carbons in CO2 adsorption: a critical review. Microporous Mesoporous Mater 287:29–5510.1016/j.micromeso.2019.05.051 ↗
12. Kašpar J, Fornasiero P (2013) Nanostructured materials for advanced automotive de-pollution catalysts. J Solid State Chem 171:19–2910.1016/S0022-4596(02)00141-X ↗
13. Di Monte R, Kašpar J (2004) On the role of oxygen storage in three-way catalysis. Top Catal 28:47–5710.1023/B:TOCA.0000024333.08447.f7 ↗
14. Motohashi T, Ueda T, Masubuchi Y, Takiguchi M, Setoyama T, Oshima K, Kikkawa S (2010) Remarkable oxygen intake/release capability of BaYMn2O5+δ: applications to oxygen storage technologies. Chem Mater 22:3192–319610.1021/cm100290b ↗
15. Klimkowicz A, Świerczek K, Rząsa T, Takasaki A, Dabrowski B (2016) Oxygen storage properties and catalytic activity of layer ordered perovskites BaY1−xGdxMn2O5+δ. Solid States Ionics 288:43–4710.1016/j.ssi.2016.01.038 ↗
16. Klimkowicz A, Świerczek K, Yamazaki T, Takasaki A (2016) Enhancement of the oxygen storage properties of BaPrMn2O5+δ and BaSmMn2O5+δ oxides by a high-energy milling. Solid State Ionics 298:66–7210.1016/j.ssi.2016.11.013 ↗
17. Nazarpoor Z, Golden SJ (2016) Clean Diesel Technologies, Inc., Thermally stable compositions of OSM free of rare earth metals, US Patent USOO9486784B2
18. Bahout M, Managutti PB, Dorcet V, Le Gal La A, Salle S, Paofai T Hansen (2020) In situ exsolution of Ni particles on the PrBaMn2O5 SOFC electrode material monitored by high temperature neutron powder diffraction under hydrogen. J Mater Chem A 8:3590–359710.1039/C9TA10159D ↗
19. Zhang Y, Zhao H, Du Z, Świerczek K, Li Y (2019) High-performance SmBaMn2O5+δ electrode for symmetrical solid oxide fuel cell. Chem Mater 31(10):3784–379310.1021/acs.chemmater.9b01012 ↗
20. Tonus F, Bahout M, Dorcet V, Gauthier GH, Paofai S, Smith RI, Skinner SJ (2016) Redox behavior of the SOFC electrode candidate NdBaMn2O5+δ investigated by high-temperature in situ neutron diffraction: first characterisation in real time of an LnBaMn2O5.5 intermediate phase. J Mater Chem A 4:11635–1164710.1039/C6TA03224A ↗
21. Macias MA, Sandoval MV, Martinez NG, Vázquez-Cuadriello S, Suescun L, Roussel P, Świerczek K, Gauthier GH (2016) Synthesis and preliminary study of La4BaCu5O13+δ and La6.4Sr1. 6Cu8O20±δ ordered perovskites as SOFC/PCFC electrode materials. Solid State Ionics 288:61–6710.1016/j.ssi.2016.02.010 ↗
22. Jeamjumnunja K, Gong W, Makarenko T, Jacobson AJ (2015) A determination of the oxygen non-stoichiometry of the oxygen storage material YBaMn2O5+δ. J Solid State Chem 230:397–40310.1016/j.jssc.2015.07.044 ↗
23. Abughayada C, Dabrowski B, Kolesnik S, Brown DE, Chmaissem O (2015) Characterization of oxygen storage and structural properties of oxygen-loaded hexagonal RMnO3+δ (R = Ho, Er, and Y). Chem Mater 27(18):6259–626710.1021/acs.chemmater.5b01817 ↗
24. Vieten J, Bulfin B, Call F, Lange M, Schmücker M, Francke A, Roeb M, Sattler C (2016) Perovskite oxides for application in thermochemical air separation and oxygen storage. J Mater Chem A 4:13652–1365910.1039/C6TA04867F ↗
25. Bulfin B, Vieten J, Starr DE, Azarpira A, Zachäus C, Hävecker M, Skorupska K, Schmücker M, Roeb M, Sattler C (2017) Redox chemistry of CaMnO3 and Ca0.8Sr0.2MnO3 oxygen storage perovskites. J Mater Chem A 5:7912–791910.1039/C7TA00822H ↗
26. Karppinen M, Yamauchi H, Otani S, Fujita T, Motohashi T, Huang Y-H, Valkeapää M, Fjellvåg H (2006) Oxygen nonstoichiometry in YBaCo4O7+δ: large low-temperature oxygen absorption/desorption capability. Chem Mater 18:490–49410.1021/cm0523081 ↗
27. Motohashi T, Hirano Y, Masubuchi Y, Oshima K, Setoyama T, Kikkawa S (2013) Oxygen storage capability of brownmillerite-type Ca2AlMnO5+δ and its application to oxygen enrichment. Chem Mater 25(3):372–37710.1021/cm303156n ↗
28. Dou J, Krzystowczyk E, Mishra A, Liu X, Li F (2018) Perovskite promoted mixed cobalt–iron oxides for enhanced chemical looping air separation. ACS Sustain Chem Eng 6:15528–1554010.1021/acssuschemeng.8b03970 ↗
29. Xu M, Wu H-C, Lin YS, Deng S (2018) Simulation and optimization of pressure swing adsorption process for high-temperature air separation by perovskite sorbents. Chem Eng J 354:62–7410.1016/j.cej.2018.07.080 ↗
30. Parkkima O, Yamauchi H, Karppinen M (2013) Oxygen storage capacity and phase stability of variously substituted YBaCo4O7+δ. Chem Mater 25:599–60410.1021/cm3038729 ↗
31. Klimkowicz A, Cichy K, Chmaissem O, Dabrowski B, Poudel B, Świerczek K, Taddei KM, Takasaki A (2019) Reversible oxygen intercalation in hexagonal Y0.7Tb0.3MnO3+d: toward oxygen production by temperature-swing absorption in air. J Mater Chem A 7:2608–261810.1039/C8TA09235D ↗
32. Klimkowicz A, Świerczek K, Kobayashi S, Takasaki A, Allahyani W, Dabrowski B (2018) Improvement of oxygen storage properties of hexagonal YMnO3+d by microstructural modifications. J Solid State Chem 258:471–47610.1016/j.jssc.2017.10.037 ↗
33. Świerczek K, Klimkowicz A, Nishihara K, Kobayashi S, Takasaki A, Alanizy M, Kolesnik S, Dabrowski B, Seonge S, Kange J (2017) Oxygen storage properties of hexagonal HoMnO3+d. Phys Chem Chem Phys 19:19243–1925110.1039/C7CP03556J ↗
34. Skjærvø SH, Wefring ET, Nesdal SK, Gaukås NH, Olsen GH, Glaum J, Tybell T, Selbach SM (2016) Interstitial oxygen as a source of p-type conductivity in hexagonal manganites. Nat Commun 7:1374510.1038/ncomms13745 ↗
35. Asakura Y, Miyake A, Otomo M, Yin S (2020) Improvement of the O2 storage/release rate of YMnO3 nanoparticles synthesized by the polymerized complex method. Dalton Trans 49:966–97110.1039/C9DT04095A ↗
36. Database of Ionic Radii: http://abulafia.mt.ic.ac.uk/shannon/ptable.php, accessed on 06 April 2020
37. Parkkima O, Malo S, Hervieu M, Rautama EL, Karppinen M (2015) New RMnO3+δ (R = Y, Ho; δ ≈ 0.35) phases with modulated structure. J Solid State Chem 221:109–11510.1016/j.jssc.2014.09.012 ↗
38. West AR (2014) “Solid state chemistry and its applications”, second edition, 2nd, Student edn. Wiley, Chichester
39. Larson AC, von Dreele RB (2004) GSAS general structure analysis system. Los Alamos National Laboratory Unclassified Report, 86–748
40. Toby HB (2001) EXPGUI, a graphical user interface for GSAS. J Appl Crystallogr 34:210–21310.1107/S0021889801002242 ↗
41. Li P, Chena X, Li Y, Schwank JW (2019) A review on oxygen storage capacity of CeO2-based materials: influence factors, measurement techniques, and applications in reactions related to catalytic automotive emissions control. Catal Today 327:90–11510.1016/j.cattod.2018.05.059 ↗
42. Bêche E, Charvin P, Perarnau D, Abanades S, Flamant G (2008) Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (CexTiyOz). Surf Interface Anal 40:264–26710.1002/sia.2686 ↗
43. Junta JL, Hochella MF (1994) Manganese (II) oxidation at mineral surfaces: a microscopic and spectroscopic study. Geochim Cosmochim Acta 58:4985–499910.1016/0016-7037(94)90226-7 ↗