Microstructure of the interface zone after explosive welding and further annealing of A1050/Ni201 clads using various joining conditions
Source abstract
Abstract
Abstract Explosive welding is a joining method suitable for materials difficult or impossible to connect using traditional welding techniques. In this work, the microstructure details occurring in the neighborhood of the aluminum (A1050) and nickel (Ni201) alloys’ interfaces in explosive welds were described. It was shown that using appropriate welding conditions, although the mutual localization of the colliding plates was different, the microstructure of the bonded zone did not change. Moreover, further annealing of the samples at 500 °C revealed the microstructure transformation occurring as a result of the diffusion phenomena. This in turn provides the details essential in proper designing of the multilayers of metallic–intermetallic Al/Ni composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fronczek DM, Wojewoda-Budka J, Chulist R, Sypien A, Korneva A, Szulc Z, Schell N, Zieba P (2016) Structural properties of Ti/Al clads manufactured by explosive welding and annealing. Mater Des 9:80–8910.1016/j.matdes.2015.11.087 ↗
2. Honarpisheh M, Asemabadi M, Sedighi M (2012) Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer. Mater Des 37:122–12710.1016/j.matdes.2011.12.045 ↗
3. Saksl K, Ostroushko D, Mazancova E, Szulc Z, Milkovic O, Durisin M, Balga D, Durisin J, Rutt U, Gutowski O (2015) Local structure of explosively welded titanium-stainless steel bimetal. Int J Mater Res 106:621–62710.3139/146.111224 ↗
4. Bina MH, Dehghani F, Salim M (2013) Effect of heat treatment on bonding interface in explosive welded copper/stainless steel. Mater Des 45:504–50910.1016/j.matdes.2012.09.037 ↗
5. Acarer M, Demir B (2008) An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel. Mater Lett 62:4158–416010.1016/j.matlet.2008.05.060 ↗
6. Kahraman N, Gülenç B, Findik F (2007) Corrosion and mechanical-micro structural aspects of dissimilar joints of Ti-6Al-4V and Al plates. Int J Impact Eng 34:1423–143210.1016/j.ijimpeng.2006.08.003 ↗
7. Kahraman N, Gülenç B, Findik F (2005) Joining of titanium/stainless steel by explosive welding and effect on interface. J Mater Process Technol 169:127–13310.1016/j.jmatprotec.2005.06.045 ↗
8. Patterson RA (1993) Fundamentals of Explosion Welding. In: Olson DL, Siewert TA, Liu S, Edwards GR (eds) ASM handbook, volume 6: welding, brazing, and soldering. ASM International, Materials Park
9. Wasek S, Mroz S, Stradomski G, Laber K (2013) The analysis of Al-Cu bimetallic bars bond layers joined by the explosive method. Solid State Phenom 199:508–51310.4028/www.scientific.net/SSP.199.508 ↗
10. Guo X, Tao J, Wang W, Li H, Chen C (2013) Effects of the inner mould material on the aluminium–316L stainless steel explosive clad pipe. Mater Des 49:116–12210.1016/j.matdes.2013.02.001 ↗
11. Prazmowski M, Paul H (2012) The effect of stand-off distance on the structure and properties of zirconium—carbon steel bimetal produced by explosion welding. Arch Metall Mater 57:1201–121010.2478/v10172-012-0134-0 ↗
12. Acarer M, Gulenc B, Findik F (2003) Investigation of explosive welding parameters and their effects on microhardness and shear strength. Mater Des 24:659–66410.1016/S0261-3069(03)00066-9 ↗
13. Crossland B (1982) Explosive welding of metals and its application. Clarendon Press, Oxford, p 233
14. Blazynski TZ (1983) Explosive welding, forming, and compaction. Elsevier, New York, p 40210.1007/978-94-011-9751-9 ↗
15. Mamalis AG, Szalay A, Vaxevanidis NM, Pantelis DI (1994) Macroscopic and microscopic phenomena of nickel titanium ‘shape-memory’ bimetallic strips fabricated by explosive cladding and rolling. Mater Sci Eng A 188:267–27510.1016/0921-5093(94)90381-6 ↗
16. Khoklov VI, Popov GV, Krasnov VD, Andrianov VM (1991) Special features of the change of structure of titanium alloys in explosive welding. Met Sci Heat Treat 32:537–54010.1007/BF00700329 ↗
17. Gerland M, Presles HN, Guin JP, Bertheau D (2000) Explosive cladding of thin Ni-film to an aluminium alloy. Mater Sci Eng A280:311–31910.1016/S0921-5093(99)00695-4 ↗
18. Ogneva TS, Lazurenko DV, Bataev IA, Mali VI, Esikov MA, Bataev AA (2016) Formation of intermetallics at the interface of explosively welded Ni-Al multilayered composites during annealing. IOP Conf Ser Mater Sci 124:1–6
19. Bataev IA, Ogneva TS, Bataev AA, Mali VI, Esikov MA, Lazurenko DV, Guo Y, Jorge Junior AM (2015) Explosive welded multilayer Ni-Al composites. Mater Des 88:1082–108710.1016/j.matdes.2015.09.103 ↗
20. Fronczek DM, Chuilst R, Litynska-Dobrzynska L, Lopez GA, Wierzbicka-Miernik A, Schell N, Szulc Z, Wojewoda-Budka J (2017) Microstructural and phase composition differences across the interfaces in Al/Ti/Al explosively welded clads. Metall Mater Trans A 48A:4154–416510.1007/s11661-017-4169-8 ↗
21. Wang H, Wang Y (2018) High-velocity impact process: a review. Metals 9:144. https://doi.org/10.3390/met902014410.3390/met9020144 ↗
22. Crosland B, Williams JD (1970) Explosive welding. Met Rev 15:79–10010.1179/imr.1970.15.1.79 ↗
23. Findik F (2011) Recant developments in explosive welding. Mater Des 32:1081–109310.1016/j.matdes.2010.10.017 ↗