journal article·2020-04

Phase transformation during friction stir processing of dual-phase 600 steel

Nikhil Gotawala, Abhishek Wadighare, Amber Shrivastava

Journal of Materials Science· Volume 55· Issue 10
Publisher page

Abstract

The objective of this work is to investigate the phase transformation during friction stir processing of dual-phase 600 steel. Friction stir processing is a microstructure modification process through high strain rate deformation at high temperature. The material undergoes appreciable microstructural changes, which reflects in the refined mechanical properties. The type of metallurgical phases and their fractions have direct impact on the mechanical properties. A coupled 3D thermo-mechanical and phase transformation model is developed to predict the temperature history, plastic deformation and phase transformation during friction stir processing. The modified Johnson–Mehl–Avrami Kolmogorov and Koistinen–Marburger equations are used to model the diffusional and non-diffusional phase transformation, respectively. Friction stir processing is performed with 1.4-mm-thick dual-phase 600 steel and pinless tool. Friction stir tool rotation frequency is varied across friction stir-processed samples, at constant traverse speed. Electron back-scattered diffraction and optical microscopy are used to analyse the phases and microstructure. Model predicts the maximum bainite and martensite volume fractions at stir zone centre. Further, more bainite and martensite formation is estimated at higher tool rotation speeds. These predictions compare well against the experimental observations. Numerical results suggest that the ferrite in the stir region is the untransformed ferrite during heating. During cooling, very small austenite grain size restricts the amount of austenite transformation to ferrite. The phases present in the stir region upon FSP are significantly affected by the amount of carbon content and the initial phases present in the steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Eng R Rep 50(1–2):1–7810.1016/j.mser.2005.07.001 ↗
2. Ma ZY (2008) Friction stir processing technology: a review. Metall Mater Trans A 39(3):642–65810.1007/s11661-007-9459-0 ↗
3. Starink MJ, Deschamps A, Wang SC (2008) The strength of friction stir welded and friction stir processed aluminium alloys. Scr Mater 58(5):377–38210.1016/j.scriptamat.2007.09.061 ↗
4. Sarwar M, Priestner R (1996) Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel. J Mater Sci 31(8):2091–2095. https://doi.org/10.1007/BF0035663110.1007/BF00356631 ↗
5. Krajewski S, Nowacki J (2014) Dual-phase steels microstructure & properties consideration based on artificial intelligence techniques. Arch Civil Mech Eng 14(2):278–28610.1016/j.acme.2013.10.002 ↗
6. Farabi N, Chen DL, Li J, Zhou Y, Dong SJ (2010) Microstructure and mechanical properties of laser welded DP600 steel joints. Mater Sci Eng A 527(4–5):1215–122210.1016/j.msea.2009.09.051 ↗
7. Liu S, Kouadri-Henni A, Gavrus A (2016) Modeling grain orientation of DP600 steel by Nd: YAG laser. In: MATEC web of conferences, EDP Sciences 80
8. Khan MI, Kuntz ML, Su P, Gerlich A, North T, Zhou Y (2007) Resistance and friction stir spot welding of DP600: a comparative study. Sci Technol Weld Join 12(2):175–18210.1179/174329307X159801 ↗
9. Fujii H, Cui L, Tsuji N, Maeda M, Nakata K, Nogi K (2006) Friction stir welding of carbon steels. Mater Sci Eng A 429(1–2):50–5710.1016/j.msea.2006.04.118 ↗
10. Cui L, Fujii H, Tsuji N, Nogi K (2007) Friction stir welding of a high carbon steel. Scr Mater 56(7):637–64010.1016/j.scriptamat.2006.12.004 ↗
11. Reynolds AP, Tang W, Posada M, Deloach J (2003) Friction stir welding of DH36 steel. Sci Technol Weld Join 8(6):455–46010.1179/136217103225009125 ↗
12. Shi L, Wu CS (2017) Transient model of heat transfer and material flow at different stages of friction stir welding process. J Manuf Processes 25:323–33910.1016/j.jmapro.2016.11.008 ↗
13. Khandkar MZH, Khan JA, Reynolds AP (2003) Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Join 8(3):165–17410.1179/136217103225010943 ↗
14. Schmidt H, Hattel J (2004) A local model for the thermomechanical conditions in friction stir welding. Model Simul Mater Sci Eng 13(1):7710.1088/0965-0393/13/1/006 ↗
15. Nandan R, Roy GG, Lienert TJ, Debroy T (2007) Three-dimensional heat and material flow during friction stir welding of mild steel. Acta Mater 55(3):883–89510.1016/j.actamat.2006.09.009 ↗
16. Nandan R, Roy GG, Lienert TJ, DebRoy T (2006) Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel. Sci Technol Weld Join 11(5):526–53710.1179/174329306X107692 ↗
17. Bastier A, Maitournam MH, Van KD, Roger F (2006) Steady state thermomechanical modelling of friction stir welding. Sci Technol Weld Join 11(3):278–28810.1179/174329306X102093 ↗
18. Callister WD Jr, Rethwisch DG (2012) Fundamentals of materials science and engineering: an integrated approach, 4th edn. Wiley, New York
19. Zhang W, Elmer JW, DebRoy T (2002) Kinetics of ferrite to austenite transformation during welding of 1005 steel. Scr Mater 46(10):753–75710.1016/S1359-6462(02)00040-4 ↗
20. Han HN, Park S-H (2001) Model for cooling and phase transformation behaviour of transformation induced plasticity steel on runout table in hot strip mill. Mater Sci Technol 17(6):721–72610.1179/026708301101510447 ↗
21. Şimşir C, Hakan Gür C (2008) 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution. J Mater Process Technol 207(1–3):211–22110.1016/j.jmatprotec.2007.12.074 ↗
22. Serajzadeh S (2004) Modelling of temperature history and phase transformations during cooling of steel. J Mater Process Technol 146(3):311–31710.1016/j.jmatprotec.2003.11.010 ↗
23. Cho H-H, Kim D-W, Hong S-T et al (2015) Three-dimensional numerical model considering phase transformation in friction stir welding of steel. Metall Mater Trans A 46(12):6040–605110.1007/s11661-015-3177-9 ↗
24. Wrożyna A, Pernach M, Kuziak R et al (2016) Experimental and numerical simulations of phase transformations occurring during continuous annealing of DP steel strips. J Mater Eng Perform 25(4):1481–149110.1007/s11665-016-1907-9 ↗
25. Kozlowski PF, Thomas BG, Azzi JA et al (1992) Simple constitutive equations for steel at high temperature. Metall Trans A 23(3):90310.1007/BF02675567 ↗
26. Soundararajan V, Zekovic S, Kovacevic R (2005) Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061. Int J Mach Tools Manuf 45(14):1577–158710.1016/j.ijmachtools.2005.02.008 ↗
27. Kulakov M, Poole WJ, Militzer M (2013) The effect of the initial microstructure on recrystallization and austenite formation in a DP600 steel. Metall Mater Trans A 44(8):3564–357610.1007/s11661-013-1721-z ↗
28. Asadabad MA, Goodarzi M, Kheirandish S (2008) Kinetics of austenite formation in dual phase steels. ISIJ Int 48(9):1251–125510.2355/isijinternational.48.1251 ↗
29. Gery D, Long H, Maropoulos P (2005) Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding. J Mater Process Technol 167(2–3):393–40110.1016/j.jmatprotec.2005.06.018 ↗