Preparation and foaming mechanism of foamable polypropylene based on self-assembled nanofibrils from sorbitol nucleating agents
Source abstract
Abstract
A strategy to prepare foamable isotactic polypropylene (iPP) was proposed by introducing crystal nucleating agent, 1,3:2,4-bis(p-methylbenzylidene) sorbitol (S20), and the foaming mechanism was also investigated. When a proper concentration (above 0.3 wt%) of S20 was added, iPP/S20 exhibited excellent foaming performance, yielding uniform cells with well-defined structures and higher cell density than those of neat iPP. The results of rheological analysis and TEM confirmed the formation of S20 nanofibrils in iPP matrix. The existence of these nanofibrils increased the melt viscosity of iPP and enhanced the bubble nucleation in the foaming process, and thus should be responsible for the improved foaming ability of iPP. Moreover, iPP/S20 could be foamed in a remarkably wide temperature range from 143 to 163 °C. In comparison, another crystal nucleating agent, sodium 2,2′-methylene-bis-(4,6-di-tert-butylphenyl)-phosphate (NA40), contributed little to the foamability of iPP although it also induced the crystallization of iPP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · biodegradable polymer synthesis and properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Liao R, Yu W, Zhou C (2010) Rheological control in foaming polymeric materials: II. Semi-crystalline polymers. Polymer 51:6334–634510.1016/j.polymer.2010.11.001 ↗
2. Wang K, Wu F, Zhai W, Zheng W (2013) Effect of polytetrafluoroethylene on the foaming behaviors of linear polypropylene in continuous extrusion. J Appl Polym Sci 129:2253–226010.1002/app.38959 ↗
3. Chang A, Tau L, Hiltner A, Baer E (2002) Structure of blown film from blends of polyethylene and high melt strength polypropylene. Polymer 43:4923–493310.1016/S0032-3861(02)00304-X ↗
4. Lin W, Shao Z, Jy D, Chung TCM (2009) Cross-linked polypropylene prepared by PP copolymers containing flexible styrene groups. Macromolecules 42:3750–375410.1021/ma9002775 ↗
5. Zhang ZJ, Wan D, Xing HP, Tan HY, Wang L, Zheng J, An YJ, Tang T (2012) A new grafting monomer for synthesizing long chain branched polypropylene through melt radical reaction. Polymer 53:121–12910.1016/j.polymer.2011.11.033 ↗
6. Zhai W, Kuboki T, Wang L, Park CB, Lee EK, Naguib HE (2010) Cell structure evolution and the crystallization behavior of polypropylene/clay nanocomposites foams blown in continuous extrusion. Ind Eng Chem Res 49:9834–984510.1021/ie101225f ↗
7. Ding J, Ma W, Song F, Zhong Q (2013) Effect of nano-calcium carbonate on microcellular foaming of polypropylene. J Mater Sci 48:2504–2511. doi: 10.1007/s10853-012-7039-110.1007/s10853-012-7039-1 ↗
8. Bhattacharya S, Gupta RK, Jollands M, Bhattacharya SN (2009) Foaming behavior of high-melt strength polypropylene/clay nanocomposites. Polym Eng Sci 49:2070–208410.1002/pen.21343 ↗
9. Ss H, Hsu PP (2013) Effects of silica particle size on the structure and properties of polypropylene/silica composites foams. J Ind Eng Chem 19:1377–138310.1016/j.jiec.2012.12.043 ↗
10. Okamoto M, Nam PH, Maiti P, Kotaka T, Nakayama T, Takada M, Ohshima M, Usuki A, Hasegawa N, Okamoto H (2001) Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam. Nano Lett 1:503–50510.1021/nl010051+ ↗
11. Doroudiani S, Park CB, Kortschot MT (1996) Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers. Polym Eng Sci 36:2645–266210.1002/pen.10664 ↗
12. Xin C, He Y, Li Q, Huang Y, Yan B, Wang X (2011) Crystallization behavior and foaming properties of polypropylene containing ultra-high molecular weight polyethylene under supercritical carbon dioxide. J Appl Polym Sci 119:1275–128610.1002/app.30717 ↗
13. Lipp J, Shuster M, Terry AE, Cohen Y (2006) Fibril formation of 1,3:2,4-di(3,4-dimethylbenzylidene) sorbitol in a polypropylene melt. Langmuir 22:6398–640210.1021/la060490u ↗
14. Shepard TA, Delsobo CR, Louth RM, Walborn JL, Norman DA, Harvvey NG, Spontak RJ (1997) Self-organization and polyolefin nucleation efficacy of 1,3:2,4-di-p-methylbenzylidene sorbitol. J Polym Sci Part B 35:2617–262810.1002/(SICI)1099-0488(19971130)35:16<2617::AID-POLB5>3.0.CO;2-M ↗
15. Kristiansen M, Werner M, Tervoort T, Smith P, Blomenhofer M, Schmidt H-W (2003) The binary system isotactic polypropylene/bis (3,4-dimethylbenzylidene) sorbitol: phase behavior, nucleation, and optical properties. Macromolecules 36:5150–515610.1021/ma030146t ↗
16. Perilla JE, Lee B-J, Jana SC (2010) Rheological investigation of interactions between sorbitol and polyhedral oligomeric silsesquioxane in development of nanocomposites of isotactic polypropylene. J Rheol 54:761–77910.1122/1.3439695 ↗
17. Sreenivas K, Basargekar R, Kumaraswamy G (2011) Phase separation of DMDBS from PP: effect of polymer molecular weight and tacticity. Macromolecules 44:2358–236410.1021/ma200035s ↗
18. Wang K, Zhou C, Tang C, Zhang Q, Du R, Fu Q, Li L (2009) Rheologically determined negative influence of increasing nucleating agent content on the crystallization of isotactic polypropylene. Polymer 50:696–70610.1016/j.polymer.2008.11.019 ↗
19. Miyamoto R, Yasuhara S, Shikuma H, Ohshima M (2013) Preparation of micro/nanocellular polypropylene foam with crystal nucleating agents. Polym Eng Sci 54:2075–208510.1002/pen.23758 ↗
20. Rungswang W, Thongsak K, Prasansuklarb A, Plailahan K, Saendee P, Rugmai S, Cheevasrirungruang W (2014) Effects of sodium salt and sorbitol-derivative nucleating agents on physical properties related to crystal structure and orientation of polypropylene. Ind Eng Chem Res 53:2331–233910.1021/ie4039136 ↗
21. Nagasawa S, Fujimori A, Masuko T, Iguchi M (2005) Crystallisation of polypropylene containing nucleators. Polymer 46:5241–525010.1016/j.polymer.2005.03.099 ↗
22. Zhao S, Xin Z, Zhang J, Han T (2012) Combined effect of organic phosphate sodium and nanoclay on the mechanical properties and crystallization behavior of isotactic polypropylene. J Appl Polym Sci 123:617–62610.1002/app.34527 ↗
23. Behrendt N, Mohmeyer N, Hillenbrand J, Klaiber M, Zhang X, Sessler GM, Schmidt HW, Altstädt V (2006) Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing α-and β-nucleating agents. J Appl Polym Sci 99:650–65810.1002/app.22502 ↗
24. Zhou S, Zhao S, Xin Z (2014) Preparation and foamability of high melt strength polypropylene based on grafting vinyl polydimethylsiloxane and styrene. Polym Eng Sci 55:251–25910.1002/pen.23889 ↗
25. Kumar V, Suh NP (1990) A process for making microcellular thermoplastic parts. Polym Eng Sci 30:1323–132910.1002/pen.760302010 ↗
26. Liu H, Chuai CZ, Iqbal M, Wang HS, Kalsoom BB, Khattak M, Khattak MQ (2011) Improving foam ability of polypropylene by crosslinking. J Appl Polym Sci 122:973–98010.1002/app.33227 ↗
27. Tenma M, Yamaguchi M (2007) Structure and properties of injection-molded polypropylene with sorbitol-based clarifier. Polym Eng Sci 47:1441–144610.1002/pen.20839 ↗
28. Yoshimoto S, Ueda T, Yamanaka K, Kawaguchi A, Tobita E, Haruna T (2001) Epitaxial act of sodium 2,2′-methylene-bis-(4,6-di-t-butylphenylene) phosphate on isotactic polypropylene. Polymer 42:9627–963110.1016/S0032-3861(01)00510-9 ↗
29. Shi Y, Xin Z (2012) The correlation between crystal structure and nucleation efficiency of a lithium (I) complex on isotactic polypropylene. J Appl Polym Sci 125:2963–296910.1002/app.36236 ↗
30. Long L, He W, Zhang M, Zhang K, Qin S, Yu J (2015) Nucleation effects of sodium and ammonium salts of 2,2′-methylene-bis-(4,6-di-t-butylphenylene) phosphate in isotactic polypropylene. Polym Eng Sci 55:22–2810.1002/pen.23862 ↗
31. Xu ZM, Jiang XL, Liu T, Hu GH, Zhao L, Zhu ZN, Yuan WK (2007) Foaming of polypropylene with supercritical carbon dioxide. J Supercrit Fluid 41:299–31010.1016/j.supflu.2006.09.007 ↗
32. Oh K, Seo YP, Hong SM, Takahara A, Lee KH, Seo Y (2013) Dispersion and reaggregation of nanoparticles in the polypropylene copolymer foamed by supercritical carbon dioxide. Phys Chem Chem Phys 15:11061–1106910.1039/c3cp51068a ↗