Volcanic particle materials in polymer composites: a review
Source abstract
Abstract
© 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.This paper reviews a literature survey on the usage of volcanic particle materials as an alternative filler material in polymer composites. Also, it highlights different types of volcanic particle materials and their potential effect on the performance of polymer composites. The review begins with Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analysis of different volcanic materials. Then, it reviews the thermal and mechanical properties of polymer composites that filled with different volcanic particle materials such as volcanic ash, pumice, perlite, and tuff. Reviewed articles have demonstrated that volcanic particle materials can serve as a polymer composite filler. However, there are several factors such as volcanic particle type, size, surface treatment, dispersion, filler concentration, and interfacial interaction with polymer matrix that should be considered and optimized to achieve a balanced polymer composite with its desired properties. Further, the review provides some insights on the gap in the research of volcanic particle material in polymer composites. In particular, the research of volcanic particle materials in different kind of polymers especially bio-based and recycled ones according to the cost-effective and green applications was suggested to be focused. Graphical abstract: [Figure not available: see fulltext.].
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Avcu E, Coban O, Bora MO, Fidan S, Sinmazcelik T, Ersoy O (2014) Possible use of volcanic ash as a filler in Polyphenylene Sulfide composites: thermal, mechanical, and erosive wear properties. Polym Compos 35:1826–1833. https://doi.org/10.1002/pc.2284710.1002/pc.22847 ↗
2. Akkaya R (2013) Uranium and thorium adsorption from aqueous solution using a novel polyhydroxyethylmethacrylate-pumice composite. J Environ Radioact 120:58–63. https://doi.org/10.1016/j.jenvrad.2012.11.01510.1016/j.jenvrad.2012.11.015 ↗
3. Kitis M, Karakaya E, Yigit NO, Civelekoglu G, Akcil A (2005) Heterogeneous catalytic degradation of cyanide using copper-impregnated pumice and hydrogen peroxide. Water Res 39:1652–1662. https://doi.org/10.1016/j.watres.2005.01.02710.1016/j.watres.2005.01.027 ↗
4. Kurtulmus E, Karaboyacı M and Yigitarslan S (2013) Production and characterization of a composite insulation material from waste polyethylene teraphtalates. 3rd International Advances in Applied Physics and Materials Science Congress, AIP Conf Proc 1569, 487–491; doi: https://doi.org/10.1063/1.484932110.1063/1.4849321 ↗
5. Mboya HA, Njau KN, Mrema AL, King’ondu CK (2019) Influence of scoria and pumice on key performance indicators of Portland cement concrete. Constr Build Mater 197:444–453. https://doi.org/10.1016/j.conbuildmat.2018.11.22810.1016/j.conbuildmat.2018.11.228 ↗
6. Felekoglu B (2012) A method for improving the early strength of pumice concrete blocks by using alkyl alkoxy silane (AAS). Constr Build Mater 28:305–310. https://doi.org/10.1016/j.conbuildmat.2011.07.02610.1016/j.conbuildmat.2011.07.026 ↗
7. Sari D, Pasamehmetoglu AG (2005) The effects of gradation and admixture on the pumice lightweight aggregate concrete. Cem Concr Res 35:936–942. https://doi.org/10.1016/j.cemconres.2004.04.02010.1016/j.cemconres.2004.04.020 ↗
8. Samarzija-Jovanovic S, Jovanovic V, Markovic G, Zekovic I, Marinovic-Cincovic M (2014) Properties of vulcanized polyisoprene rubber composites filled with opalized white tuff and precipitated silica. Hindawi Publ Corp, Sci World J 2014:1–9. https://doi.org/10.1155/2014/91319710.1155/2014/913197 ↗
9. Correcher V, Gomez-Ros JM, Dogan T, Garcia-Guinea J, Topaksu M (2017) Optical, spectral and thermal properties of natural pumice glass. Radiat Phys Chem 130:69–7570. https://doi.org/10.1016/j.radphyschem.2016.08.00210.1016/j.radphyschem.2016.08.002 ↗
10. Raji M, Nekhlaoui S, Amrani El HassaniEssassi IEEM, Essabir H, Rodrigue D, Bouhfid R, Qaiss A (2019) Utilization of volcanic amorphous aluminosilicate rocks (perlite) as alternative materials in lightweight composites. Compos Part B 165:47–54. https://doi.org/10.1016/j.compositesb.2018.11.09810.1016/j.compositesb.2018.11.098 ↗
11. Atagür M, Sarikanat M, Uysalman T, Polat O, Elbeyli IY, Seki Y, Sever K (2018) Mechanical, thermal, and viscoelastic investigations on expanded perlite–filled high-density polyethylene composite. J Elastomers Plast 50:747–761. https://doi.org/10.1177/009524431876504510.1177/0095244318765045 ↗
12. Doğan M, Yüksel H, Kizilduman BK (2021) Characterization and thermal properties of chitosan/perlite nanocomposites. Int J Mater Res 112:5. https://doi.org/10.1515/ijmr-2020-800710.1515/ijmr-2020-8007 ↗
13. Allameh-Haery H, Kisi E, Fiedler T (2016) Novel cellular perlite–epoxy foams: effect of density on mechanical properties. J Cell Plast 53:1–18. https://doi.org/10.1177/0021955X1665211010.1177/0021955X16652110 ↗
14. Allameh-Haery H, Wensrich CM, Fiedler T, Kisi E (2016) Novel cellular perlite-epoxy foams: effects of particle size. J Cell Plast 53:1–26. https://doi.org/10.1177/0021955X1667052810.1177/0021955X16670528 ↗
15. Alghadi AM, Tirkes S, Tayfun U (2020) Mechanical, thermo-mechanical and morphological characterization of ABS based composites loaded with perlite mineral. Mater Res Express 7:015301. https://doi.org/10.1088/2053-1591/ab551b10.1088/2053-1591/ab551b ↗
16. Tekin N, Kadıncı E, Demirbaş Ö, Alkan M, Kara A, Doğan M (2006) Surface properties of poly(vinylimidazole)-adsorbed expanded perlite. Microporous Mesoporous Mater 93:125–133. https://doi.org/10.1016/j.micromeso.2006.02.00910.1016/j.micromeso.2006.02.009 ↗
17. de Gerhardt Oliveira A, Jandorno JC, da Dutra Rocha EB, de Furtado Sousa AM, da Nazareth Silva AL (2019) Evaluation of expanded perlite behavior in PS/Perlite composites. Appl Clay Sci 181:105223. https://doi.org/10.1016/j.clay.2019.10522310.1016/j.clay.2019.105223 ↗
18. Lapčík L, Vašina M, Lapčíková B, Staněk M, Ovsík M, Murtaja Y (2020) Study of the material engineering properties of high-density poly(ethylene)/perlite nanocomposite materials. Nanotechnol Rev 9:1491–1499. https://doi.org/10.1515/ntrev-2020-011310.1515/ntrev-2020-0113 ↗
19. Szadkowski B, Marzec A, Rybinski P, Zukowski W, Zaborski M (2020) Characterization of ethylene–propylene composites filled with perlite and vermiculite minerals: mechanical, barrier, and flammability properties. Materials 13(3):585. https://doi.org/10.3390/ma1303058510.3390/ma13030585 ↗
20. Sahraeian R, Esfandeh M (2017) Mechanical and morphological properties of LDPE/perlite nanocomposite films. Polym Bull 74:1327–1341. https://doi.org/10.1007/s00289-016-1779-z10.1007/s00289-016-1779-z ↗
21. Bush AL (2001) Construction Materials: Lightweight Aggregates. Encycl Mater: Sci Technol, ISBN: 0-08-0431526, 1550-155910.1016/B0-08-043152-6/00277-1 ↗
22. Kucharczyk W, Dusiński D, Żurowski W, Gumiński R (2018) Effect of composition on ablative properties of epoxy composites modified with expanded perlite. Compos Struct 183:654–662. https://doi.org/10.1016/j.compstruct.2017.08.04710.1016/j.compstruct.2017.08.047 ↗
23. Masłowski M, Miedzianowska J, Strzelec K (2019) Hybrid straw/perlite reinforced natural rubber biocomposites. J Bionic Eng 16:1127–1142. https://doi.org/10.1007/s42235-019-0124-210.1007/s42235-019-0124-2 ↗
24. Sahraeian R, Hashemi SA, Esfandeh M, Ghasemi I (2012) Preparation of nanocomposites based on LDPE/Perlite: mechanical and morphological studies. Polym Polym Compos 20:639–646. https://doi.org/10.1177/09673911120200070810.1177/096739111202000708 ↗
25. Członka S, Kairyte A, Miedzinska K, Strakowska A (2021) Polyurethane composites reinforced with walnut shell filler treated with perlite, montmorillonite and halloysite. Int J Mol Sci 22:7304. https://doi.org/10.3390/ijms2214730410.3390/ijms22147304 ↗
26. Tekin N, Dinçer A, Demirbaş Ö, Alkan M (2010) Adsorption of cationic polyacrylamide (C-PAM) on expanded perlite. Appl Clay Sci 50:125–129. https://doi.org/10.1016/j.clay.2010.07.01410.1016/j.clay.2010.07.014 ↗
27. Papa E, Medri V, Murri AN, Laghi L, De Aloysio G, Bandini S, Landi E (2018) Characterization of alkali bonded expanded perlite. Constr Build Mater 191:1139–1147. https://doi.org/10.1016/j.conbuildmat.2018.10.08610.1016/j.conbuildmat.2018.10.086 ↗
28. Rashad AM (2016) A synopsis about perlite as building material - a best practice guide for Civil Engineer. Constr Build Mater 121:338–353. https://doi.org/10.1016/j.conbuildmat.2016.06.00110.1016/j.conbuildmat.2016.06.001 ↗
29. Lemougna PN, Wang K, Tang Q, Nzeukou AN, Billong N, Melo UC, Xue-min C (2018) Review on the use of volcanic ashes for engineering applications. Res, Conserv Recycl 137:177–190. https://doi.org/10.1016/j.resconrec.2018.05.03110.1016/j.resconrec.2018.05.031 ↗
30. Siddique R (2011) Effect of volcanic ash on the properties of cement paste and mortar. Resour Conserv Recycl 56:66–70. https://doi.org/10.1016/j.resconrec.2011.09.00510.1016/j.resconrec.2011.09.005 ↗
31. Kabra S, Katara S, Rani A (2013) Characterization and study of Turkish Perlite. Int J Innov Res Sci Eng Technol 2(9):4319–4326
32. Onar AN, Balkaya N, Akyüz T (1996) Phosphate removal by adsorption. Environ Technol 17:207–213. https://doi.org/10.1080/0959333170861637810.1080/09593331708616378 ↗
33. Mekonnen DT, Alemayehu E, Lennartz B (2021) Adsorptive removal of phosphate from aqueous solutions using low-cost volcanic rocks: kinetics and equilibrium approaches. Materials 14(5):1312. https://doi.org/10.3390/ma1405131210.3390/ma14051312 ↗
34. Ramesan MT, Jose C, Jayakrishnan P, Anilkumar T (2018) Multifunctional ternary composites of poly (Vinyl Alcohol)/cashew tree gum/pumice particles. Polym Compos 39:38–45. https://doi.org/10.1002/pc.2389910.1002/pc.23899 ↗
35. Yılmaz K, Akgoz A, Cabuk M, Karaagac H, Karabulut O, Yavuz M (2011) Electrical transport, optical and thermal properties of polyaniline–pumice composites. Mater Chem Phys 130:956–961. https://doi.org/10.1016/j.matchemphys.2011.08.01710.1016/j.matchemphys.2011.08.017 ↗
36. Gök A, Göde F, Türkaslan BE (2016) Synthesis and characterization of polyaniline/pumice (PAn/Pmc) composite. Mater Sci Eng, B 133:20–25. https://doi.org/10.1016/j.mseb.2006.04.04010.1016/j.mseb.2006.04.040 ↗
37. Almiron J, Roudet F, Duquesne S (2019) Influence of volcanic ash, rice husk ash, and solid residue of catalytic pyrolysis on the flame-retardant properties of polypropylene composites. J Fire Sci 37(4–6):434–451. https://doi.org/10.1177/073490411986791210.1177/0734904119867912 ↗
38. Kufel A, Kuciel S (2019) Composites based on polypropylene modified with natural fillers to increase stiffness. Tech Trans 1:187–195. https://doi.org/10.4467/2353737XCT.19.013.1005310.4467/2353737XCT.19.013.10053 ↗
39. Tarverdi K, Madoyan Z (2014) Preparation and properties of polypropylene and PA 6 composites reinforced with Armenian tuff stone. Eur Sci J Nov /SPECIAL/ edition vol.2 ISSN: 1857–7881 (Print) e - ISSN 1857–7431
40. Elmastaş N (2012) A mine becoming increasingly important for economy of Turkey: pumice. J Int Soc Res 5:197–206
41. Jayakrishnan P, Ramesan MT (2016) Synthesis, characterization and properties of poly (vinyl alcohol)/ chemically modified and unmodified pumice composites. Journal of Chemical and Pharmaceutical Sciences, Special Issue 1:97–104. ISSN: 0974–2115
42. Eroğlu G, Şahiner M (2020) Dünyada ve Türkiye’de Pomza. Report, Maden Tetkik ve Arama Genel Müdürlüğü. https://www.maden.org.tr/resimler/ekler/3f09b21324d1ed3_ek.pdf
43. Ramesan MT, George A, Jayakrishnan P, Kalaprasad G (2016) Role of pumice particles in the thermal, electrical and mechanical properties of poly(vinyl alcohol)/poly(vinyl pyrrolidone) composites. J Therm Anal Calorim 126:511–519. https://doi.org/10.1007/s10973-016-5507-610.1007/s10973-016-5507-6 ↗
44. Akbal FÖ, Akdemir N, Onar AN (2000) FT-IR spectroscopic detection of pesticide after sorption onto modified pumice. Talanta 53:131–135. https://doi.org/10.1016/S0039-9140(00)00380-510.1016/S0039-9140(00)00380-5 ↗
45. Hossain KMA (2003) Blended cement using volcanic ash and pumice. Cem Concr Res 33:1601–1605. https://doi.org/10.1016/S0008-8846(03)00127-310.1016/S0008-8846(03)00127-3 ↗
46. Yavuz M, Çabuk M (2007) Electrorheological properties of pumice/silicone oil suspension. J Mater Sci 42:2132–2137. https://doi.org/10.1007/s10853-006-1296-910.1007/s10853-006-1296-9 ↗
47. Budzik G, Galina H, Heneczkowski M, Mossety-Leszczak B, Oleksy M (2018) Non-combustible epoxy composites [in Polish]. Mater Eng 5:1372–1377
48. Demirbas Ö, Alkan M, Dogan M (2002) The Removal of victoria blue from aqueous solution by adsorption on a low-cost material. Adsorption 8:341–349. https://doi.org/10.1023/A:102158951476610.1023/A:1021589514766 ↗
49. Vuluga Z, Paceagiu J, Iorga M, Coarna M (2015) Influence of siliceous materials on the elasticity modulus and thermal conductivity of polymeric composite materials. Rom J Mater 45(4):370–376
50. Gündüz L, Bekar M, Şapcı N (2007) Influence of a new type of additive on the performance of polymer-lightweight mortar composites. Cem Concr Compos 29:594–602. https://doi.org/10.1016/j.cemconcomp.2007.03.00710.1016/j.cemconcomp.2007.03.007 ↗
51. Sarı A, Karaipekli A (2008) Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage. Mater Chem Phys 109:459–464. https://doi.org/10.1016/j.matchemphys.2007.12.01610.1016/j.matchemphys.2007.12.016 ↗
52. Zhang D, Tian S, Xiao D (2007) Experimental study on the phase change behavior of phase change material confined in pores. Sol Energy 81:653–660. https://doi.org/10.1016/j.solener.2006.08.01010.1016/j.solener.2006.08.010 ↗
53. Özkan ŞG and Tuncer G (2001) Pomza Madenciliğine Genel Bir Bakış. 4. Endüstriyel Hammaddeler Sempozyumu, İzmir, Türkiye
54. Ersoy B, Sariisik A, Dikmen S, Sariisik G (2010) Characterization of acidic pumice and determination of its electrokinetic properties in water. Powder Technol 197:129–13510.1016/j.powtec.2009.09.005 ↗
55. Siddique R, (2012) Properties of concrete made with volcanic ash (Review). Resources, Conservation and Recycling 66: 40–44. http://dx.doi.org/https://doi.org/10.1016/j.resconrec.2012.06.01010.1016/j.resconrec.2012.06.010 ↗
56. Biagdassarov N, Ritter F, Yanev Y (1999) Kinetics of perlite glasses degassing: TG and DSC analysis. Glastech Ber Glass Sci Technol 72(9):277–290
57. Bideci ÖS, Bideci A, Gültekin AH, Oymael S, Yıldırım H (2014) Polymer coated pumice aggregates and their properties. Composites 67:239–243. https://doi.org/10.1016/j.compositesb.2013.10.00910.1016/j.compositesb.2013.10.009 ↗
58. Karaipekli A, Sari A, Kaygusuz K (2009) Thermal characteristics of paraffin/expanded perlite composite for latent heat thermal energy storage. Energy Sour, Part A 31:814–823. https://doi.org/10.1080/1556703070175276810.1080/15567030701752768 ↗
59. Sever K, Atagür M, Tunçalp M, Altay L, Seki Y, Sarıkanat M (2018) The effect of pumice powder on mechanical and thermal properties of polypropylene. J Thermoplast Compos Mater 32(8):1092–110610.1177/0892705718785692 ↗
60. Kallergis G, Pisania M, Simitzis J (2013) Manufacture and characterization of heat resistant and insulating new composites based on novolac resin – carbon fibers – perlite. Macromol Symp 331–332:137–143. https://doi.org/10.1002/masy.20130007310.1002/masy.201300073 ↗
61. Li TT, Chuang YC, Huang CH, Lou CW, Lin JH (2015) Applying vermiculite and perlite fillers to sound-absorbing/thermal-insulating resilient PU foam composites. Fibers Polym 16(3):691–698. https://doi.org/10.1007/s12221-015-0691-810.1007/s12221-015-0691-8 ↗
62. Dike AS (2020) Modification of pumice mineral and its use as additive for poly (Lactic Acid) based bio-composite materials. AKU J Sci Eng 20:111–117. https://doi.org/10.35414/akufemubid.61899310.35414/akufemubid.618993 ↗
63. Khorzughy SH, Eslamkish T, Ardejani FD, Heydartaemeh MR (2015) Cadmium removal from aqueous solutions by pumice and nano-pumice. Korean J Chem Eng 32(1):88–96. https://doi.org/10.1007/s11814-014-0168-210.1007/s11814-014-0168-2 ↗
64. Rahmaniar ST, Prasetya HA, Marlina P, Purbaya M, Chalid M, Hasan A (2020) The effect of pumice and clay composition in natural rubber-ethylene propylene diene monomer blends towards its curing characteristics and physic-mechanical properties. Mater Sci Eng 980:012003. https://doi.org/10.1088/1757-899X/980/1/01200310.1088/1757-899X/980/1/012003 ↗
65. Celik AG, Kilic AM, Cakal GO (2013) Expanded perlite aggregate characterization for use as a lightweight construction raw material”. Physicochem Probl Miner Process 49(2):689–700. https://doi.org/10.5277/ppmp13022710.5277/ppmp130227 ↗
66. Roulia M, Chassapis K, Kapoutsis JA, Kamitsos EI, Savvidis T (2006) Influence of thermal treatment on the water release and the glassy structure of perlite. J Mater Sci 41:5870–5881. https://doi.org/10.1007/s10853-006-0325-z10.1007/s10853-006-0325-z ↗
67. Reka AA, Pavlovski B, Lisichkov K, Jashari A, Boev B, Boev I, Lazarova M, Eskizeybek V, Oral A, Jovanovski G, Makreski P (2019) Chemical, mineralogical and structural features of native and expanded perlite from Macedonia. J Croat Geol Surv Croat Geol Soc 72(3):215–221. https://doi.org/10.4154/gc.2019.1810.4154/gc.2019.18 ↗
68. Sahin A, Karsli NG, Sinmazcelik T (2016) Comparison of the mechanical, thermomechanical, thermal, and morphological properties of pumice and calcium carbonate-filled poly(phenylene sulphide) composites. Polym Compos 37:3160–3166. https://doi.org/10.1002/pc.2351310.1002/pc.23513 ↗
69. Karaipekli A, Biçer A, Sarı A, Tyagi VV (2017) Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes. Energy Convers Manage 134:373–381. https://doi.org/10.1016/j.enconman.2016.12.05310.1016/j.enconman.2016.12.053 ↗
70. Yavuz M, Gode F, Pehlivan E, Ozmert S, Sharma YC (2008) An economic removal of Cu2+ and Cr3+ on the new adsorbents: pumice and polyacrylonitrile/pumice composite. Chem Eng J 137:453–461. https://doi.org/10.1016/j.cej.2007.04.03010.1016/j.cej.2007.04.030 ↗
71. Angelopoulos PM, Kenanakis G, Viskadourakis Z, Tsakiridis P, Vasilopoulos KC, Karakassides MA, Taxiarchou M (2022) Manufacturing of ABS/expanded perlite filament for 3D printing of lightweight components through fused deposition modeling”. Materials 54:14–21. https://doi.org/10.1016/j.matpr.2021.06.35110.1016/j.matpr.2021.06.351 ↗
72. Karaca E, Omeroglu S, Akcam O (2016) Investigation of the effects of perlite additive on some comfort and acoustical properties of polyester fabrics. J Appl Polym Sci 133(16):44128. https://doi.org/10.1002/app.4312810.1002/app.43128 ↗
73. Tayfun Ü, Kanbur Y (2018) Mechanical, physical and morphological properties of acidic and basic pumice containing polypropylene composites. Sak Univ J Sci 22(2):333–339. https://doi.org/10.16984/saufenbilder.28786110.16984/saufenbilder.287861 ↗
74. Davachi SM, Heidari BS, Sahraeian R, Abbaspourrad A (2019) The effect of nanoperlite and its silane treatment on the crystallinity, rheological, optical, and surface properties of polypropylene/nanoperlite nanocomposite films. Compos B 175:107088. https://doi.org/10.1016/j.compositesb.2019.10708810.1016/j.compositesb.2019.107088 ↗
75. Çoban O (2015) Solid particle erosion behavior of volcanic Ash/PVC composites. Acta Phys Pol, A 127:998–1001. https://doi.org/10.12693/APhysPolA.127.99810.12693/APhysPolA.127.998 ↗
76. Çoban O, Bora MÖ, Kutluk T, Fidan S, Sınmazçelik T (2016) Effect of silane as coupling agent on dynamic mechanical properties of volcanic ash filled PPS composites. Acta Phys Pol, A 129:492–494. https://doi.org/10.12693/APhysPolA.129.49210.12693/APhysPolA.129.492 ↗
77. Kutluk T, Çoban O, Bora MÖ, Fidan S, Sınmazçelik T (2016) Silane coupling efficiency on thermal properties of volcanic ash filled PPS composites. Acta Phys Pol, A 129:498–500. https://doi.org/10.12693/APhysPolA.129.49810.12693/APhysPolA.129.498 ↗
78. Sahin AE, Yildiran Y, Avcu E, Fidan S, Sinmazcelik T (2014) Mechanical and thermal properties of pumice powder filled PPS composites. Acta Phys Pol, A 125:518–520. https://doi.org/10.12693/APhysPolA.125.51810.12693/APhysPolA.125.518 ↗
79. Folorunso O, Dodds C, Dimitrakis G, Kingman S (2012) Continuous energy efficient exfoliation of vermiculite through microwave heating. Int J Miner Process 114–117:69–79. https://doi.org/10.1016/j.minpro.2012.10.00310.1016/j.minpro.2012.10.003 ↗
80. Cicconi MR, Neuville DR (2019) 22. Natural Glasses. Springer Handbook of Glass, Springer Handbooks10.1007/978-3-319-93728-1_22 ↗
81. Jing Q, Fang L, Liu H, Liu P (2011) Preparation of surface-vitrified micron sphere using perlite from Xinyang, China. Appl Clay Sci 53:745–748. https://doi.org/10.1016/j.clay.2011.07.00510.1016/j.clay.2011.07.005 ↗
82. Heide K, Heide G (2011) Vitreous state in nature – Origin and properties. Chem Erde Geochem 71:305–33. https://doi.org/10.1016/j.chemer.2011.10.00110.1016/j.chemer.2011.10.001 ↗
83. Deganello G, Liotta L, Longo A, Martorana A, Yanev Y, Zotov N (1998) Structure of natural water containing glasses from Lipari (Italy) and Eastern Rhodopes (Bulgaria): SAXS, WAXS and IR studies. J Non-Cryst Solids 232:547–553. https://doi.org/10.1016/S0022-3093(98)00429-310.1016/S0022-3093(98)00429-3 ↗
84. Krzyzak A, Kucharczyk W, Gaska J, Szczepaniak R (2018) Ablative test of composites with epoxy resin and expanded perlite: review. Compos Struct 202:978–987. https://doi.org/10.1016/j.compstruct.2018.05.01810.1016/j.compstruct.2018.05.018 ↗
85. Amrani S, Halimi Y, Tahiri M (2014) Composite materials using expanded perlite as a charge and plastic wastes as reinforcement, elaboration and properties. GSTF Int J Chem Sci (JChem) 1(2):1–8. https://doi.org/10.7603/s40837-014-0003-710.7603/s40837-014-0003-7 ↗
86. Angelopoulos PM, Maliachova C, Papakonstantinou K, Taxiarchou M, Diplas S (2016) Structural and physical characteristics of fine perlite expanded with a novel method in a vertical electric furnace. Mineral Process Extr Metall 125(2):71–80. https://doi.org/10.1080/03719553.2016.115624410.1080/03719553.2016.1156244 ↗
87. Sahraeian R, Davachi SM, Heidari BS (2019) The effect of nanoperlite and its silane treatment on thermal properties and degradation of polypropylene/nanoperlite nanocomposite films. Compos B 162:103–111. https://doi.org/10.1016/j.compositesb.2018.10.09310.1016/j.compositesb.2018.10.093 ↗
88. Çoban O, Bora MÖ, Kutluk T, Özkoç G (2018) Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites. Polym Compos 39:E1500–E1511. https://doi.org/10.1002/pc.2439310.1002/pc.24393 ↗
89. Dong S, Gauvin R (1993) Application of dynamic mechanical analysis for the study of the interfacial region in carbon Fiber/ Epoxy composite materials. Polym Compos 14(5):414–420. https://doi.org/10.1002/pc.75014050810.1002/pc.750140508 ↗
90. Li Y, Mai YW, Ye L (2005) Effects of fibre surface treatment on fracture-mechanical properties of sisal-fibre composites. Composite Interfaces 12(1–2):141–163. https://doi.org/10.1163/156855405354215110.1163/1568554053542151 ↗
91. Sahraeian R, Esfandeh M, Hashemi SA (2013) Rheological, thermal and dynamic mechanical studies of the LDPE/Perlite nanocomposites. Polym Polym Compos 21(4):243–250. https://doi.org/10.1177/09673911130210040610.1177/096739111302100406 ↗
92. Tian H, Tagaya H (2007) Preparation, characterization and mechanical properties of the polylactide/perlite and the polylactide/montmorillonite composites. J Mater Sci 42:3244–3250. https://doi.org/10.1007/s10853-006-0230-510.1007/s10853-006-0230-5 ↗
93. Tian H, Tagaya H (2008) Dynamic mechanical property and photochemical stability of perlite/PVA and OMMT/PVA nanocomposites. J Mater Sci 43:766–770. https://doi.org/10.1007/s10853-007-2127-310.1007/s10853-007-2127-3 ↗
94. Çoban O, Bora MÖ, Kutluk T, Fidan S, Sinmazçelik T (2018) Heat treatment effect on thermal and thermomechanical properties of polyphenylene sulfide composites reinforced with silane-treated volcanic ash particles. Polym Compos 39:1612–1619. https://doi.org/10.1002/pc.2410610.1002/pc.24106 ↗
95. Kurt Albayrak ZN, and Gencer G (2020) The usability of clay/pumice mixtures modified with biopolymer as an impermeable liner. KSCE J Civil Eng, pISSN 1226–7988, eISSN 1976–3808. doi: https://doi.org/10.1007/s12205-020-1053-710.1007/s12205-020-1053-7 ↗
96. Sariisik A, Sariisik G (2012) New production process for insulation blocks composed of EPS and lightweight concrete containing pumice aggregate. Mater Struct 45:1345–1357. https://doi.org/10.1617/s11527-012-9836-z10.1617/s11527-012-9836-z ↗
97. Bora MÖ, Çoban O, Kutluk T, Akagündüz E (2019) The use of volcanic particles in HDPE offers alternative filling material against CaCO3. Part II—scratch properties. Polym Compos 40:2564–2572. https://doi.org/10.1002/pc.2504410.1002/pc.25044 ↗
98. Sahin AE, Cetin B, Sinmazcelik T (2021) Investigation of mechanical and tribological behaviour of expanded perlite particle reinforced polyphenylene sulphide. Proc IMechE Part L: J Mater: Design Appl 235:2356–2367. https://doi.org/10.1177/1464420721102734210.1177/14644207211027342 ↗
99. Singh T (2021) Tribological performance of volcanic rock (perlite)-filled phenolic-based brake friction composites. J King Saud Univ - Eng Sci, (In Press), 2021. https://doi.org/10.1016/j.jksues.2021.12.01010.1016/j.jksues.2021.12.010 ↗
100. Żmudka S, Budniak I, Kuciel S, Mikuła J (2009) Estimation of the possibilities of Using Vulcanic Tuf as thermoplastic polymer filler. Tech Trans 1:421–428